Catalog 1308242 Issued 3-03 (PDF Rev. 5-05) P&B P25 series Definite Purpose Magnetic Contactor 25 Ampere Full Load 30 Ampere Resistive AC & DC Coils File E22575 File LR15734 P25 with DC coil P25 with AC coil Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * * * * AC and DC coils. For controlling motors, power supplies, heating elements and lighting. Dust cover available. Auxiliary switch available. Contact Data @ 25C Arrangements: Up to 3 Form X (3PST-NO-DM). Ratings: See contact rating table. Material: Silver-cadmium oxide. Expected Life: 200,000 operations at full load. AC coil: 2 million operations, mechanical. DC coil: 5 million operations, mechanical. Minimum Contact Load: 3A @ 120VAC. Motor Rating in Amps, 3O3P or 1O2P Full Load Locked Rotor @ 600V @ 240V @ 480V @ 600V P25 25A Type 1O2P 3O3P 150A 125A 100A Motor Rating in Horsepower @ 120V @ 240V 1.5HP 3HP 3HP 7.5HP Resistance (Ohms 10% @ 25C) Must Operate* Volts 12 24 34 133 AC Voltage Rating 60 Hz. 50 Hz. 24 120 240 24 120 208/240 24 110 208/220 Maximum Operating Volts 9 18 Nominal Nominal Coil Current (ma) @ Nominal Voltage 15 30 353 180 Must Operate 60 Hz. 50 Hz. 20.4 102 177 20.4 94 177 Consult factory for other voltages. *Must operate is 75% of nominal voltage for any mounting position, applicable for vertical or horizontal mounting, but not for upside-down mounting. **Units requiring less power can be provided for some applications. Consult factory for details. Note: Coil suppression is recommended for all DC coil units, particularly 120 and 240VDC coils. Main Contact Ratings @ +25C, 60 Hz. Type Nominal VDC Resistive Rating (Electric Heat) @ 600V 30A Operate Data @ 25C @ 440-600V Must-Operate Voltage: See coil data tables. -- 10HP Notes: Models utilizing box lug terminals are restricted to the following ratings: 25 FLA, 150 LRA @ 250VAC; 30A @ 277VAC Resistive; Horsepower ratings shown in the table are valid up to 240VAC. Tungsten Lamp Rating: 30A, 277VAC. Electric Discharge Lamp Rating: 30A, 277VAC. Heavy Duty Pilot Ratings @ 120V through 600V: 720VA max. (Box lug nut units limited to 277VAC.) Auxiliary Snap-Action Switch Arrangements: Up to 2 Form C (DPDT). Rating: 10 amps at 120VAC, 60 Hz. @ 25C. Material: Silver. Environmental Data Temperature Range: AC: --55C to +65C DC: --55C to +55C Contact sales representative for higher temperature ratings. Initial Dielectric Strength Initial Breakdown Voltage: 2,200V rms. minimum between all elements and between all elements and ground. Coil Data @ 25C Voltage: From 6 to 240VDC and 24 to 600VAC, 50/60 Hz. Power: DC, 4-8W; AC, 40VA inrush; 10VA, sealed. Duty Cycle: Continuous. Insulation Class: Class A, standard. Class B available. Initial Insulation Resistance: 100 megohms, minimum. Dimensions are shown for 820 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Mounting: No. 10 screws on 2.125" (53.98mm) centers or universal mounting bracket. Termination: Contacts: 8-32 screw for No. 16 to No. 8 wire, dual .250" (6.35mm) quick connect, box lug or captive pressure plate. Coil: Combination 8-32 screw and .250" (6.35mm) or .187" (4.75mm) quick connect, combination captive pressure plate and .250" (6.35mm) quick connect, or .250" (6.35mm) quick connect. Aux. Switch: .187" (4.75mm) quick connect. Weight: 14 oz. (397g). Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Rev. 5-05) P&B Ordering Information Typical Part No. B P25 P 42 A 1 4 P 1 -240 1. Type: P25 Definite Purpose Contactor 2. Auxiliary Switch: P = No Aux Switch C = 1 Form C (SPDT), silver contacts F = 2 Form C (DPDT), silver contacts Double pole contact forms require two switches. 3. Main Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 43 = 2 Form X (DPST-NO-DM) & 1 Form Y (SPST-NC-DB) Other contact arrangements are available. 4. Coil Control Input: A = Alternating Current, 50/60 Hz. D = Direct Current 5. Mounting and Installed Accessories: 1 = Without Mounting Plate* 2 = With Mounting Plate * Order separately any mounting hardware which is to be bulk packed. 6. Main Contact Terminals: 2 = 8-32 Screw Terminals 3 = Dual .250" (6.35mm) Quick Connect 5 = 8-32 Screw with Captive Pressure Plate 7. Auxiliary Contact Terminals: P = No Auxiliary Switch C = .187" (4.75mm) Quick Connect 8. Coil Terminals: 1 = Combination 8-32 Screw Terminal and .250" (6.35mm) Quick Connect 6-32 Screw Terminal available on DC Coils only. 9. Coil Voltage: 24, 120 or 240VAC 12 or 24VDC See Coil Data table. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. P25P42A12P1-120 P25P42A12P1-240 P25P42A22P1-120 P25P42A22P1-240 P25P42D22P1-12 P25P42D22P1-24 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 821 Catalog 1308242 Issued 3-03 (PDF Rev. 5-05) P&B Outline Dimensions P25 With DC Coil 1.875 (47.63) 2.00 (50.8) 2.90 MAX. (73.7) W/SINGLE SWITCH 2.50 MAX. (63.5) 2.125 .01 (53.98 .25) 3.35 MAX. (85.1) W/DOUBLE SWITCH 3.35 MAX. (85.1) W/DOUBLE SWITCH .218 .01 (5.54 .25) (1.00) (25.4) .21 (5.3) .250 (6.35) .062 (1.57) 1.625 3.250 (41.28) (82.55) 3.75 (95.3) .5 DIA. (12.7) 3.125 (79.38) 1.062 (26.97) 3.400 MAX. (86.36) W/SINGLE SWITCH 3.400 MAX. (86.36) W/SINGLE SWITCH 2.125 (53.98) #10-32 TYP. 2 PLACES .142 (3.61) 3.575 MAX. (90.81) W/CONTACT DUST COVER 3.25 MAX. (82.6) W/CONTACT DUST COVER .69 .015 (17.5 .38) 1.61 MAX. (40.9) 3.325 MAX. (84.48) W/O CONTACT DUST COVER 2.750 MAX. (69.85) W/O SWITCHES 2.750 MAX. (69.85) W/O SWITCHES 3.0 MAX. (76.2) W/O CONTACT DUST COVER 2.50 (63.5) 4.050 MAX. (102.87) W/DOUBLE SWITCH .218 .01 (5.54 .25) 2.125 .01 (53.98 .25) 2.05 MAX. (52.1) 2.50 MAX. (63.5) 2.90 MAX. (73.7) W/SINGLE SWITCH 4.050 MAX. (102.87) W/DOUBLE SWITCH Mounting Plate Footprint 2.05 MAX. (52.1) P25 With AC Coil .69 .015 (17.5 .38) .88 .015 (22.4 .38) .90 .015 (22.9 .38) Contact Terminal Options Code 2 #8-32 UNF-2A X .375" (9.525mm) Binder Terminal Screw 15S334 Code 3 Duak .250" (6.35mm) Quick Connect 26A902 Code 4 Box Lug Connector 26A866 Code 5 #8-32 UNF-2A X .500" (12.7mm) Screw With Captive Pressure Plate 15S354 Replacement Parts and Accessories Contact Replacement Kit - 9P25X1 Contact replacement kit includes 3 contact pressure springs, 3 movable contact assemblies and 6 stationary contact assemblies. Contact replacement kits are for use only on those models with form X contact arrangements. Mounting Plate Kit - 9P25X2 Mounting plate kit includes one mounting plate (37B918) and two mounting screws (15J011). Auxiliary Switch Kit for P25 AC Coil Units - 9P25X3 This auxiliary switch kit includes one plastic actuator and one auxiliary switch assembly. It contains no screw. One assembly screw must be removed from the P25 contactor and used to mount the auxiliary switch. Auxiliary Switch Kit for P25 DC Coil Units - 9P25X4 This auxiliary switch kit includes one plastic actuator, one auxiliary switch assembly and one thread cutting screw. Dimensions are shown for 822 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.