1/7/14Page1/5

Panel feed-through-Q 0,75/4FL/11-M20KU-ESA-1640650

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 2.8 x 0.8 mm. 4-

Key commercial data

Connection If the conductor is reconnected, it must be cut off above the last contact

point. QUICKON components may only be operated when under no load.

Color green

Connection method QUICKON connection

Manual solder/slip on connection

Number of positions 4

Wrench size, union nut 22 mm

Tightening torque, union nut 2.5 Nm

Wrench size, contact carrier 22 mm

1/7/14Page2/5

Panel feed-through-Q 0,75/4FL/11-M20KU-ESA-1640650

Technical data

Conductor cross section AWG/kcmil max 18

Structure of individual litz in acc. with VDE 0295 / smallest wire diameter Class 2-6 // 0.34 mm²: 0.1 mm; 0.5 - 0.75 mm²: 0.15 mm

Wire insulation material PVC/PE

Wire diameter including insulation 2.5 mm

Ambient conditions

Degree of protection IP65

Rated voltage (III/3) 160 V

Note on the rated voltage (III/3) with insulating sleeve

Rated voltage (III/2) 160 V

Note on the rated voltage (III/2) with insulating sleeve

Rated voltage (II/2) 320 V

Note on the rated voltage (II/2) with insulating sleeve

Mechanical characteristics

QUICKON connectability 10 (if the conductor is connected more than once, seal and cap may need

to be replaced.)

PC QUICKON thread type M20 x 1,5

eCl@ss 4.0 27140815

eCl@ss 4.1 27140815

1/7/14Page3/5

Panel feed-through-Q 0,75/4FL/11-M20KU-ESA-1640650

eCl@ss 5.0 27143423

eCl@ss 5.1 27143423

eCl@ss 6.0 27143423

eCl@ss 7.0 27449001

eCl@ss 8.0 27449001

ETIM 2.0 EC001297

UNSPSC 11 39121522

UNSPSC 12.01 39121522

UNSPSC 13.2 39121522

UL Recognized / cUL Recognized / GOST / GOST / cULus Recognized

Ex Approvals

Approvals submitted

Approval details

1/7/14Page4/5

Panel feed-through-Q 0,75/4FL/11-M20KU-ESA-1640650

Nominal current IN 6 A

Nominal voltage UN 250 V

cULus Recognized

Insulating sleeve

Insulating sleeve-PT/FS 2,8-1406700

Insulating sleeve, as touch protection, slide onto the conductor before for 2.8 slip-on sleeves

1/7/14Page5/5

Panel feed-through-Q 0,75/4FL/11-M20KU-ESA-1640650

Mounting material-Q SET- 9 DI/KR-1640362

Seal/Collar replacement set Pg9

Protective cap

Filler plugs-Q-PROT 9/11-1670235

Closing cap for Pg9/Pg11 to close unoccupied connections

© Phoenix Contact 2013 - all rights reserved