MODEL L SERIES Thick Film Low Profile SIP Conformal Coated Resistor Networks Standard Resistance Range, Ohms 22 to 1Meg Standard Resistance Tolerance, at 25C +2% Optional: +1% (F Tol.), 5% (J Tol.) Operating Temperature Range -55C to +125C Temperature Coefficient of Resistance +100ppm/C (<100 Ohms = +250ppm/C) Temperature Coefficient of Resistance, Tracking +50ppm/C Maximum Operating Voltage 100Vde or VPR Insulation Resistance >10,000 Megohms Thermal Shock plus Power Conditioning AR 0.70% Short Time Overload AR 0.25% Terminal Strength AR 0.25% Moisture Resistance AR 0.50% Mechanical Shock AR 0.25% Vibration AR 0.25% Low Temperature Storage AR 0.25% High Temperature Exposure AR 0.50% Load Life, 1,000 Hours AR 1.00% Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) AR 0.25% Dielectric Withstanding Voltage 200V for 1 minute Marking Permanency MIL-STD 202, Method 215 Lead Solderability MIL-STO 202, Method 208 Flammability UL-94V-O Rated Storage Temperature Range -55C to +150C Specifications subject to change without notice. F Bi technologies 4-37 Model L Series Lead Material Steel Ailoy (Standard) Copper Alloy (Optional) Lead Finish 90/10 Tin-Lead Substrate Material Alumina Resistor Material Cermet Body Material Conformal Epoxy Resin STANDARD RESISTANCE VALUES, OHMS POWER DERATING CURVE -3 Circuit (Isotated Resistors) & -1 Circuits (Bussed Resistors) Ohms Code Ohms Code Ohms Code ve 7 22 220 820 821 33K 333 Percent of 60 J 27 ~-270 1K 102 39K 393 Rated Power 0 1 33 330 1.2K 122 47K 473 07 390 5K 152 470 tax tw aK - o 125 150 , 3 Degrees C 51 510 2K 202 68K 683 56 560 2.2K 222 82K 823 68 680 2.7K 272 100K 104 100 101 3.9K 392 150K 154 120 121 47K 472 180K 184 150 151 51K 512 200K 204 Resistor (Per Circuit) 180 181 56K 562 220K 224 Model Package = -1 35 200 201 6.8K 682 270K 274 LO6 6 125 200 125 220 221 8.2K 822 330K 334 Los 8 125 200 125 270 = 71 10K 103 390K 394 L10 1.0 425 200.2125 330 331 42K 423 470K 474 390 391 15K 153 510K 514 470471 18K 183 560K 564 510 511 20K 203 680K 684 560 561 29K 223 820K 824 680 681 27K 273 {Meg 105 -5 Circuit (Dual Terminators) Ohms Code Ohms Code Ohms Code R1/R2 Ri/R2 R1/R2 R1/R2 R1/R2 Ri/R2 180/390 181/391 | 330/390 331/391 | 3K/6.2K 302/622 220/270 221/271 | 330/470 331/471 220/330 221/331 | 330/680 331/681 3i technologies 4-38 Model L Series ape .095 L Max. oaL Max. 195 Mine 140+ 020 TT i [3564051 - 012 + .003 oak L lf 000 aoe Pitch Non- 0.51 +0.10 Centered Accumulative No. of Leads on Package # of Leads 4 5 6 7 8 9 10 11 12 13 14 Dim. L | _.40 00 60 10 80 90 | 1.00] 1.10 | 1.20 | 1.30 | 1.40 Max. 10.16 | 12.70 | 15.24 | 17.78 | 20.32 | 22.86 | 25.40 | 27.94 | 30.48 | 33.02 | 35.56 -3 Circuit -1 Circuit Isolated Resistors Bussed Resistors 1 2 3 n 1 2 3 4 teens n - Circuit Dual Terminator KF 553i technologies 4-39 Model L Series TYPICAL PART MARKING Lead #1 Indicator 4 Leads Only Lead #1 Indicator B 104 L_] Date Code Model Resistance Code Series Circuit Type & |.D. Code Resistance Code Logo Factory Code Number Of Leads Circuit Type Standard: Option: Option: Bulk: Quantity = 500 (Europe) 200 Units (USA/Asia) Tape in Ammo Box (Steel pins only). All Units oriented with jead #1 to the left of direction of feed. Tape: Width = 18mm Pitch = 12.7mm Ammo Box: Capacity = 1,000 Units Magazine Dimensions conform to EIA & JEDEC standards. All Units oriented with lead #1 to the same side. Magazine: Material = Antistatic Plastic KF 5i technologies 4-40 Model L Series ORDERING INFORMATION L 08 5 C 331/471 F XX Model Series | L Packaging Option: Number of Leads: AP = Ammo Pack, Steel Leads only mer orcas. All leads attached to tape.* 4 thru 14 G3T = Ammo Pack, Steel Leads only 3 leads only attached to tape. * Circuit Type: M1 or M2 = Tube * P 3 = Isolated i - Buseed (No code used for standard bulk packaging.) 5 = Dual Terminator Tolerance Code: F =+1% J =+5% (No code used for 2% standard.) Lead Code: S = Steel Leads C = Copper Leads R2 Resistance Code: (Add for -5 circuit only) Resistance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For "F" tolerance first 3 digits are significant. Fourth digit denotes number of trailing zeros. * Refer to Packaging for Automation section (Page A-3) for Ammo Pack capacity and dimensions. ** Refer to Packaging for Automation section (Page A-4) for M1 and M2 tube capacity and dimensions. APPLICABLE DOCUMENTS MIL-R-83401 Resistor Networks, Fixed, Film, General Specifications MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 Test Methods for Electronic and Electrical Component Parts iT | technologies 4-41 Model L Series