Advanced Power Electronics Corp. APE8861 300mA LOW DROPOUT LINEAR REGULATOR FEATURES DESCRIPTIOON Application for Extreme Low 1.0 & 1.2V Output Voltage The APE8861 series are low dropout, positive Guaranteed 300mA Output Current linear regulators with very low quiescent current. Very Low Quiescent Current at about 30uA The APE8861 can supply 300mA output current 2% Output Voltage Accuracy for 1.0V~1.5V with a low dropout voltage & very low output voltage. Needs Only 1F Capacitor for Stability The APE8861 regulator is able to operate with Thermal Shutdown Protection output capacitors as small as 1F for stability. Current Limit Protection Other than the current limit protection APE8861 also Low-ESR Ceramic Capacitor for Output Stability. offers on chip thermal shutdown feature providing Tiny SOT-23-5L & SC-70-5L packages protection against overload or any condition when RoHS Compliant & Halogen Free the ambient temperature exceeds the junction High PSRR temperature. The APE8861 series are offering several fixed output voltage types including 1.0V ~ 1.5V. APPLICATIONS The APE8861 series are available in low-profile, space-saving SOT-23-5L & SC-70-5L packages. DVD/CD-ROMs, CD/RWs Wireless Devices LCD Modules Battery Power Systems Card Readers XDSL Routers TYPICAL APPLICATION APE8861 Figure 1. Typical Application Circuit of APE8861 Note : To prevent oscillation, it is recommended to use minimum 1uF X7R or X5R dielectric capacitors if ceramics are used as input / output capacitors. PACKAGE ODERING INFORMATION APE8861 - Package type Output Voltage Y5 : SOT-23-5L 10 : 1.0V 14 : 1.4V U5 : SC-70-5L 11 : 1.1V 15 : 1.5V 12 : 1.2V 13 : 1.3V Data and specifications subject to change without notice 1 200803051 Advanced Power Electronics Corp. APE8861 ABSOLUTE MAXIMUM RATINGS Input Voltage (VIN) 6V Power Dissipation (SOT-23-5L) (SC-70-5L) Storage Temperature Range 0.4W 0.16W -65C To 150C Maximum Junction Temperature 150C RECOMMENDED OPERATING CONDITIONS Input Voltage (VIN) 2.8 to 5.5V Operating Junction Temperature Range (T J) -40 to 125 Ambient Temperature (TA) -40 to 85 PACKAGE INFORMATION SOT-23-5L (Y5) VOUT 5 1 2 SC-70-5L (U5) BP VOUT 4 3 5 1 VIN GND SHDN BP 2 4 3 VIN GND SHDN JA=250/W JA=600/W ELECTRICAL SPECIFICATIONS ( VIN=VOUT+1.4V or VIN=2.8V whichever is greater, CIN=1uF, COUT=1uF, TA=25, unless otherwise specified) Parameter SYM Output Voltage Accuracy VOUT IO= 1mA -2 ILIMIT RLoad=1 300 IQ IO= 0mA Current Limit Quiescent Current Dropout Voltage (Note 1) TEST CONDITION VDROP IO=300mA, Vo=1V MIN TYP MAX UNITS 2 % 550 mA 30 50 A 1350 1500 mV Line Regulation VLINE IO=1mA, VIN=VOUT +1.4V to 5V 1 5 mV Load Regulation (Note 2) VLOAD IO=0mA to 300mA 6 20 mV Ripple Rejection PSRR Io=1mA, COUT=1uF, fRIPPLE = 1KHz -60 fRIPPLE = 10KHz Temperature Coefficient Thermal Shutdown Temperature TC IOUT = 1mA, VIN = 5V -40 dB 50 ppm/ C C TSD 160 Thermal Shutdown Hysteresis TSD 25 Shutdown Pin Current ISHDN Shutdown Pin Voltage (ON) VSHDN(ON) Shutdown Pin Voltage (OFF) VSHDN(OFF) C 0.1 1.4 A V 0.4 V Note 1The dropout voltage is defined as VIN-VOUT, which is measured when VOUT drop about 100mV. Note 2Regulation is measured at a constant junction temperature by using 30ms current pulse and load regulation in the load range from 0mA to 300mA. 2 Advanced Power Electronics Corp. APE8861 PIN DESCRIPTIONS PIN SYMBOL PIN DESCRIPTION VIN Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input capacitor in the range of 1F to 10F is sufficient. The output supplies power to loads. The output capacitor is required to prevent output voltage unstable. The VOUT APE8861 is stable with an output capacitor 1F or greater. The larger output capacitor will be required for application with large transit load to limit peak voltage transits, besides could reduce output noise, improve stability, PSRR. GND BP SHDN Common ground pin Reference Noise Bypass ( the Bypass Capacitor 1nF ) Chip Enable (Active High) BLOCK DIAGRAM Figure 3. Block Diagram of APE8861 3 Advanced Power Electronics Corp. APE8861 Application Information The APE8861 series are low dropout linear regulators that could provide 300mA output current at dropout voltage about 300mV. Besides, current limit and on chip thermal shutdown features provide protection against any combination of overload or ambient temperature that could exceed junction temperature. 1.Output and Input Capacitor The APE8861 regulator is designed to be stable with a wide range of output capacitors. The ESR of the output capacitor affects stability. Larger value of the output capacitor decreases the peak deviations and provides to improve transition response for larger current changes. The capacitor types (aluminum, ceramic, and tantalum) have different characterizations such as temperature and voltage coefficients. All ceramic capacitors are manufactured with a variety of dielectrics, each with different behavior across temperature and applications. Common dielectrics used are X5R, X7R and Y5V. It is recommended to use 1uF X5R or X7R dielectric ceramic capacitors with 30m to 50m ESR range between device outputs to ground for transient stability. The APE8861 is designed to be stable with low ESR ceramic capacitors and higher values of capacitors and ESR could improve output stability. So the ESR of output capacitor is very important because it generates a zero to provide phase lead for loop stability. There are no requirements for the ESR on the input capacitor, but its voltage and temperature coefficient have to be considered for device application environment. 2.Protection Features In order to prevent overloading or thermal condition from damaging the device, APE8861 regulator has internal thermal and current limiting functions designed to protect the device. It will rapidly shut off PMOS pass element during overloading or over temperature condition. 3.Thermal Consideration The power handling capability of the device will be limited by maximum operation junction temperature (125C). The power dissipated by the device will be estimated by PD = IOUT x (VIN-VOUT). The power dissipation should be lower than the maximum power dissipation listed in "Absolute Maximum Ratings" section. 4 Advanced Power Electronics Corp. APE8861 TYPICAL PERFORMANCE CHARACTERISTICS Quiescent Current vs. Temperature 45 35 40 34.5 Quiescent Current, IQ(uA) Quiescent Current, I Q(uA) Quiescent Current vs. Supply Voltage 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 34 33.5 33 32.5 32 31.5 31 30.5 30 -40 7 -20 0 Supply Voltage, VIN(V) 0.7 1.015 0.6 1.01 Output Voltage(v) SHDN Pin Threshold(V) 1.02 0.5 0.4 0.3 0.2 0.1 -20 0 25 50 75 100 100 125 100 125 1 0.995 0.99 0.985 0.98 -40 125 -20 0 25 50 75 Tem perature( ) Current Limit vs. Temperature Dropout Voltage vs. Output Current 600 1.5 580 1.4 Dropout Voltage(mV) Current Limit(mA) 75 1.005 Tem perature( ) 560 540 520 500 480 460 440 1.3 1.2 1.1 -40 1 25 0.9 420 400 -40 50 Output Voltage vs. Temperature SHDN Pin Threshold vs. Temperature 0.8 0 -40 25 Tem perature( ) 85 0.8 -20 0 25 50 Tem perature( ) 75 100 125 50 100 150 200 250 300 Output Current(m A) 5 Advanced Power Electronics Corp. APE8861 TYPICAL PERFORMANCE CHARACTERISTICS Line Regulation Load Regulation 1.012 1.012 1.01 1.008 Output Voltage(V) Output Voltage(V) 1.01 1.006 1.004 1.002 1 0.998 -40 0.996 25 85 0 50 1.006 1.004 1.002 1 0.994 0.992 1.008 100 150 200 Output Current (m A) 250 300 0.998 2.8 -40 25 85 3 3.5 4 4.5 5 5.5 6 Input Voltage(V) Shutdown Exit Delay Time Shutdown Exit Delay Time VIN=2.8V, IOUT=0mA VIN=2.8V, IOUT=100mA Shutdown Exit Delay Time Shutdown Exit Delay Time VIN=2.8V, IOUT=200mA VIN=2.8V, IOUT=300mA 6 Advanced Power Electronics Corp. APE8861 TYPICAL PERFORMANCE CHARACTERISTICS Load Transient Response Load Transient Response VIN=2.8V, IOUT= 0 ~ 150mA VIN=2.8V, IOUT= 0 ~ 300mA Line Transient Response Current Limit VIN= 4 ~ 6V, IOUT= 1mA VIN=2.8V Short Circuit Short Circuit VIN=2.8V VIN=2.8V 7 Advanced Power Electronics Corp. APE8861 TYPICAL PERFORMANCE CHARACTERISTICS Power ON Sequence Power OFF Sequence VIN=2.8V, IOUT= 1mA VIN=2.8V, IOUT= 1mA Dropout Voltage vs. Load Current Dropout Voltage(V) 1.5 1.45 -40 1.4 -20 0 1.35 25 1.3 50 1.25 75 1.2 100 125 1.15 1.1 1.05 1 50 100 150 200 250 300 Output Current(m A) 8 ADVANCED POWER ELECTRONICS CORP. Package Outline : SOT-23-5L Millimeters SYMBOLS MIN NOM MAX A 1.00 1.10 1.30 A1 0.00 --- 0.10 A2 0.70 0.80 0.90 b 0.35 0.40 0.50 C 0.10 0.15 0.25 D 2.70 2.90 3.10 E 1.50 1.60 1.80 e --- 1.90(TYP) --- H 2.60 2.80 3.00 L 0.37 --- --- 1 1 5 9 e2 --- 0.95(TYP) --- Note 1Package Body Sizes Exclude Mold Flash Protrusions or Gate Burrs. Note 2Tolerance 0.1000 mm(4mil) Unless Otherwise Spe- cified. Note 3Coplanarity0.1000 mm Note 4Dimension L Is Measured in Gage plane. Part Marking Information & Packing : SOT-23 -5L Part Number : RJ Vout. RJ&XX Date Code 9 ADVANCED POWER ELECTRONICS CORP. Package Outline : SC-70-5L Millimeters b E1 SYMBOLS MIN NOM MAX A 0.80 __ 1.10 A1 0.00 __ 0.10 A2 0.70 0.90 1.00 b 0.25 0.30 0.40 b1 __ 0.38 __ C 0.10 __ 0.26 D 1.80 2.00 2.20 E1 1.15 1.25 1.35 E 1.80 2.10 2.40 e __ 1.30 __ L 0.15 0.30 0.45 L2 __ 0.15 y __ __ 0.10 0 __ 8 1 4 __ 12 E b1 C 1.All Dimension Are In Millimeters. 2.Dimension Does Not Include Mold Protrusions. Part Marking Information & Packing : SC-70-5L Part Number Vout. B&XX Date Code 10