Econo D Machined Contacts
D-Sub Connectors, Accessories, and Assemblies, Circular Mini-DINs
Same Day Shipments For Product In Stock ALLIED
c
463
750-8604 DEU-9P Plug 9 3.68 2.91 2.59 2.36
750-8606 DEU-9S Socket 9 4.58 3.81 3.39 3.09
750-8608 DAU-15P Plug 15 4.89 4.07 3.63 3.30
750-8610 DAU-15S Socket 15 6.79 5.65 5.03 4.58
750-8612 DBU-25P Plug 25 7.28 5.35 4.91 4.41
750-8614 DBU-25S Socket 25 10.10 7.58 6.95 6.24
750-8616 DCU-37P Plug 37 10.11 8.57 7.64 6.94
750-8618 DCU-37S Socket 37 12.05 10.84 9.04 7.74
750-8620 DDU-50P Plug 50 10.93 9.84 8.20 7.03
750-8622 DDU-50S Socket 50 15.73 14.16 11.80 10.11
D*U Connectors Less Contacts
750-6808 DEU-9P-FO Plug 9 1.72 1.18 1.02 .88
750-6809 DEU-9S-FO Socket 9 1.72 1.18 1.02 .88
750-6810 DAU-15P-FO Plug 15 1.78 1.22 1.06 .92
750-6811 DAU-15S-FO Socket 15 1.31 1.18 .98 .84
750-6812 DBU-25P-FO Plug 25 2.04 1.40 1.22 1.04
750-6813 DBU-25S-FO Socket 25 1.82 1.24 1.09 .94
750-6814 DCU-37P-FO Plug 37 1.82 1.64 1.37 1.17
750-6815 DCU-37S-FO Socket 37 1.74 1.57 1.31 1.12
Econo D Connectors
The D*U series has a two-piece insulator as well as crimp, snap-in-rear contacts that can be inserted by hand. An
economical connector ideal for commercial applications where field replacement of contacts is required at a lower cost
than high-reliability connectors. Insulator Material: Two-piece thermoplastic polyester UL-94-VO rated. Voltage Rating:
1000 VAC rms at sea level. Current Rating: 5 Amps. Operating Temperature: Ð65¡F to + 125¡F. The D*U version is UL
recognized. Contact Material: Copper alloy (machined), cadmium copper (stamped) with gold over nickel plating.
D*U Connectors with Machined Contacts
Stock Mfr.Õs Description Contacts
No. Type
EACH
1-24 25-49 50-99 100-249
750-6784 030-1952-000 Pin .38
750-6785 030-1953-000 Socket .42
Econo D Stamped Contacts
750-6786 030-1960-005 Pin .36
750-6787 030-1957-005 Socket .31
*Sold each in multiples of 100.
Stock Mfr.Õs Description
No. Type
EACH*
100-4900
Circular Mini-DIN Plugs
Single-Ended Cable Assembly
Stock Mfr.Õs No. of Description
No. Type Contacts
EACH
1-24 25-49 50-99
750-0198 MDC-4P13 4 2 m, Black 13.22 10.08 9.10
750-0210 MDC-6P05 6 1 m, Black 11.52 8.34 7.51
750-0234 MDC-8P05 8 1 m, Black 12.52 9.40 8.61
750-0238 MDC-8P13 8 2 m, Black 15.07 11.43 10.47
c
Pre-Assembled with Standard Shielded Cable Lengths
c
Molded-In Strain Relief
c
Shielding System Designed to Meet FCC Requirements for EMI/RFI
Suppression
c
Insulation Material: Plug Insulator Ñ UL94V-0 Rated Nylon; Plug
Overmold Ñ PVC (Black or Beige); Cable Jacket Ñ PVC (Black or Beige)
c
UL Recognized: File E19071; CSA Certified: File LR31996-6
c
Contact Material: Plug Ñ Phosphor Bronze
c
Shield Material: Steel
c
Shield Plating: Nickel
c
Standard Cable Composition: Shielded Cable with 0.197 Inch OD Jacket
over 28 AWG Stranded Wire Conductors
Contact Plating: Gold Flash Over Nickel
Back Shells
These backshells fit both standard and high-density D-Subminiature
Connectors. All listed items include a set of PVC compression inserts that
enable them to fit a range of cable sizes. All items have zinc-plated steel
hardware. Series DPH has a cover of black ABS polymer. Series DCH
(metallized plastic) has the same and is plated with nickel over copper. Series
DMH is die-cast zinc.
Plastic and Metallized Plastic Two-Piece Backshells Ñ Fig. A
Conn. Dim.
Stock Mfr.Õs Contacts Cable
B
No. Type Std./1.5 Dia. (In.)
Height
Density
750-7045 DPH-E-001 9/15 1.397 0.190/0.350 1.41 1.05 .93
750-7046 DCH-E-001 9/15 1.397 0.190/0.350 2.25 1.67 1.49
750-7049 DPH-B-001 25/44 1.655 0.190/0.460 2.51 1.86 1.66
750-7050 DCH-B-001 25/44 1.655 0.190/0.460 4.36 3.29 2.93
750-7051 DPH-C-001 37/62 1.830 0.300/0.680 2.34 1.74 1.54
Two-Piece Diecast EMI/RFI Shielded Backshells Ñ Fig. B
750-7062 DMH-E-001 9/15 1.465 0.190/0.350 3.10 2.34 2.09
EACH
1-24 25-49 50-99
Stock Mfr.Õs Shell Connector
No. Type Size Contacts
EACH
1-24 25-49 50-99
750-7038 DE-59-20 E 9 1.70 1.16 1.01
750-7039 DA-59-20 A 15 1.70 1.16 1.01
750-7040 DB-59-20 B 25 1.63 1.13 .99
For D-Sub Plug Connectors
750-7033 DE-60-20 E 9 1.38 1.02 .91
750-7034 DA-60-20 A 15 1.53 1.13 1.01
750-7035 DB-60-20 B 25 1.34 1.01 .88
750-7036 DC-60-20 C 37 1.53 1.13 1.01
750-7037 DD-60-20 D 50 1.53 1.13 1.01
Dust Caps
Polyethylene dust caps to protect D-Subs from dust, moisture, and other
contaminants that affect performance.
For D-Sub Socket Connectors
Stock Mfr.Õs Shell
No. Type Size
EACH
1-24 25-49 50-99
750-6988 DE-24657 9 4.35 3.63 3.23
750-6980 DA-24658 15 4.26 3.13 2.86
750-6982 DB-24659 25 3.65 2.54 2.35
750-6984 DC-24660 37 3.81 3.03 2.70
750-6986 DD-24661 50 4.26 3.38 3.01
Deep Straight Clamp Junction Shell
D-Subminiature Accessories
Commercial Screw Lock Assemblies
Stock Mfr.Õs Usage
Gender
No. Type (For Shell Size)
EACHDimensions Ñ In. (mm)
1-24AB 25-49
750-7000 D-20419-0 Male 9, 15 (P or S); 25, 37 (S Only) 0.250 (56.35) 0.033 (0.84) .55 .37
750-7002 D-20419-16 Male 9, 15 (P or S); 25, 37 (S Only)à Ñ Ñ .96 .70
750-7004 D-20420-0 Male 50 Socket 0.250 (56.35) 0.033 (0.84) .86 .62
750-7008 D-20418-2* Female 9, 15, 25, 37, 50 (P or S)¥ 0.312 (70.32) Ñ 1.01 .72
*PER SET/2. P = pin; S = socket. àUse with junction shell. ¥Use with or without junction shell.
Sliding Lock Assemblies
Assembly consists of lock retainer and two screws. Each lock retainer requires two type D-53018 lock posts ordered separately below.
Stock Mfr.Õs Shell
No. Type Size
EACHDimensions Ñ In. (mm)
1-24A B C 25-49 50-99
750-7001 DE-51224-1 9 1.442 (36.63) 0.500 (12.70) 0.984 (24.99) 1.53 1.38 1.15
750-7003 DA-51220-1 15 1.770 (44.96) 0.500 (12.70) 1.312 (33.27) 1.10 .77 .64
750-7005. D-53018. Lock Post...................................................................................................................................................................................................... EACH .70
Cinch/GC Waldom
GC Waldom/Cinch
8
