Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Overview The KEMET electrostatic discharge (ESD) rated commercial and automotive grade surface mount capacitors in C0G dielectric are suited for a variety of applications where electrostatic discharge (ESD) events during assembly or operation could damage the capacitor or the circuit. These ESD rated capacitors provide the ability to design within a given ESD criteria per the human body model (HBM) AEC Q200-002 criteria. The KEMET automotive grade capacitors also meet the other demanding Automotive Electronics Council's AEC-Q200 qualification requirements. The C0G dielectric features a 125C maximum operating temperature and is considered "stable." The Electronics Industries Alliance (EIA) characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications, as well as those where Q and stability of capacitance characteristics are required. The C0G dielectric exhibits no change in capacitance with respect to time and voltage, and boasts a negligible change in capacitance compared to its value at 25C. Capacitance change is limited to 30 ppm/C from -55C to +125C. Benefits * AEC-Q200 automotive qualified * ESD qualified per HBM - AEC Q200-002 * Available in package size EIA 0402, 0603, 0805, 1206 * DC Voltage ratings of 25 V, 50 V, 63 V, 100 V, 200 V and 250 V * Capacitance range from 1 nF to 100 nF * -55C to +125C operating temperature range * Lead (Pb)-free, RoHS and REACH compliant * Available capacitance tolerances of 1%, 2%, 5%, 10%, and 20% * No piezoelectric noise * Extremely low ESR and ESL * High thermal stability Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality * High ripple current capability * Preferred capacitance solution at line frequencies and into the MHz range * No capacitance changes with respect to applied DC voltage * Negligible capacitance change with respect to temperature from -55C to +125C * No capacitance decay with time * Non-polar devices, minimizing installation concerns * 100% pure matte tin-plated termination finish allowing for excellent solderability * Flexible Termination option available Applications Typical applications include: electrostatic discharge (ESD), integrated circuit (IC) protection, radio frequency (RF) filtering function, input and output automotive applications such as controllers, navigation systems, airbags and keyless systems. Built Into Tomorrow (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 1 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Ordering Information C 0603 Ceramic Case Size (L" x W") 0402 0603 0805 1206 1 2 C 103 J 3 Specification/ Capacitance Capacitance Rated Voltage Series Code (pF) Tolerance2 (VDC) C = Standard X = Flexible Termination Two significant digits and number of zeros F = 1% G = 2% J = 5% K = 10% M = 20% 3 = 25 5 = 50 M = 63 1 = 100 2 = 200 A = 250 G E C AUTO Dielectric Failure Rate/ Design Termination Finish2 Packaging/ Grade (C-Spec) G = C0G E = ESD C = 100% Matte Sn See "Packaging C-Spec Ordering Options Table" Additional capacitance tolerance offerings may be available. Contact KEMET for details. Additional capacitance tolerance offerings and termination finish options may be available. Contact KEMET for details.Benefits (cont'd) Table 1A - Capacitance Range/Selection Waterfall Case Size/ Series Capacitance Cap Code 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 102 152 222 332 472 682 103 153 223 333 473 683 104 C0402C C0603C Rated Voltage (VDC) 25 50 63 100 25 50 63 Voltage Code 3 5 M 1 3 5 M C0805C 100 200 1 2 25 50 63 3 5 M C1206C 100 200 250 1 2 A 25 50 63 3 5 M 100 200 250 1 2 A Cap Tolerance ESD Level per AEC-Q200 F = 1% G = 2% J = 5% K = 10% M = 20% 4 kV 4 kV 4 kV 4 kV 6 kV 6 kV 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 6 kV 6 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 6 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 2 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Ordering Code (C-Spec) Packaging Type Commercial Grade1 Bulk Bag 7" Reel/Unmarked 13" Reel/Unmarked 7" Reel/Unmarked/2 mm pitch2 13" Reel/Unmarked/2 mm pitch2 Not required (blank) TU 7411 (EIA 0603 and smaller case sizes) 7210 (EIA 0805 and larger case sizes) 7081 7082 Automotive Grade3 7" Reel 13" Reel/Unmarked 7" Reel/Unmarked/2 mm pitch2 13" Reel/Unmarked/2 mm pitch2 AUTO AUTO7411 (EIA 0603 and smaller case sizes) AUTO7210 (EIA 0805 and larger case sizes) 3190 3191 Default packaging is "Bulk Bag." An ordering code C-Spec is not required for "Bulk Bag" packaging. The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see "Capacitor Marking." 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L" x W") and thickness dimension. See "Chip Thickness/Tape & Reel Packaging Quantities" and "Tape & Reel Packaging Information." 3 For additional information regarding "AUTO" C-Spec options, see "Automotive C-Spec Information." 3 All automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For more information see "Capacitor Marking." 1 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 3 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Automotive C-Spec Information KEMETautomotivegradeproductsmeetorexceedtherequirementsoutlinedbytheAutomotiveElectronicsCouncil. DetailsregardingtestmethodsandconditionsarereferencedindocumentAEC-Q200,StressTestQualificationforPassive Components.TheseproductsaresupportedbyaProductChangeNotification(PCN)andProductionPartApprovalProcess warrant (PPAP). AutomotiveproductsofferedthroughourdistributionchannelhavebeenassignedaninclusiveorderingcodeC-Spec,"AUTO." ThisC-Specwasdevelopedinordertobetterservesmallandmedium-sizedcompaniesthatpreferanautomotivegrade componentwithouttherequirementtosubmitacustomerSourceControlledDrawing(SCD)orspecificationforreviewbya KEMETengineeringspecialist.ThisC-SpecisthereforenotintendedforusebyKEMETOEMautomotivecustomersandare notgrantedthesame"privileges"asotherautomotiveC-Specs.CustomerPCNapprovalandPPAPrequestlevelsarelimited (see details below.) Product Change Notification (PCN) TheKEMETproductchangenotificationsystemisusedtocommunicateprimarilythefollowingtypesofchanges: *Product/processchangesthataffectproductform,fit,function,and/orreliability *Changesinmanufacturingsite * Product obsolescence Process/Productchange Obsolescence* Days Prior To Implementation KEMET assigned Yes(withapprovalandsignoff) Yes 180 days minimum AUTO Yes(withoutapproval) Yes 90 days minimum 1 1 Customer Notification Due To: KEMET Automotive C-Spec KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. Production Part Approval Process (PPAP) ThepurposeoftheProductionPartApprovalProcessis: *Toensurethatsuppliercanmeetthemanufacturabilityandqualityrequirementsforthepurchasedparts. *Toprovidetheevidencethatallcustomerengineeringdesignrecordsandspecificationrequirementsareproperly understoodandfulfilledbythemanufacturingorganization. *Todemonstratethattheestablishedmanufacturingprocesshasthepotentialtoproducethepart. PPAP (Product Part Approval Process) Level KEMET Automotive C-Spec 1 2 3 4 5 KEMET assigned1 AUTO 1 KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. PartnumberspecificPPAPavailable Product family PPAP only (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 4 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Dimensions - Millimeters (Inches) L W B T S EIA Size Code Metric Size Code L Length W Width T Thickness B Bandwidth S Separation Minimum Mounting Technique 0.30 (0.012) 0.10 (0.004) 0.30 (0.012) Solder reflow only 0.35 (0.014) 0.15 (0.006) 0.70 (0.028) 0.50 (0.02) 0.25 (0.010) 0.75 (0.030) 0.50 (0.02) 0.25 (0.010) N/A 0.45 (0.018) 0.15 (0.006) 0.58 (0.023) 0.50 (0.02) 0.25 (0.010) 0.75 (0.030) 0.60 (0.024) 0.25 (0.010) N/A Without Flexible Termination 0402 1005 1.00 (0.040) 0.05 (0.002) 0.50 (0.020) 0.05 (0.002) 0603 1608 1.60 (0.063) 0.15 (0.006) 0.80 (0.032) 0.15 (0.006) 0805 2012 2.00 (0.079) 0.20 (0.008) 1.25 (0.049) 0.20 (0.008) 1206 3216 3.20 (0.126) 0.20 (0.008) 1.60 (0.063) 0.20 (0.008) See Table 2 for Thickness Solder wave or Solder reflow With Flexible Termination 0603 1608 1.60 (0.063) 0.17 (0.007) 0.80 (0.032) 0.15 (0.006) 0805 2012 2.00 (0.079) 0.30 (0.012) 1.25 (0.049) 0.30 (0.012) 1206 3216 3.30 (0.130) 0.40 (0.016) 1.60 (0.063) 0.35 (0.013) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com See Table 2 for Thickness Solder wave or Solder reflow C1091_C0G_ESD * 9/15/2020 5 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Qualification/Certification Commercial grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit their website at www.aecouncil.com. Environmental Compliance Lead (Pb)-free, RoHS, and REACH compliant without exemptions. Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range Capacitance Change with Reference to +25C and 0 VDC Applied (TCC) Aging Rate (Maximum % Capacitance Loss/Decade Hour) Dielectric Withstanding Voltage (DWV) 1 2 3 Dissipation Factor (DF) Maximum Limit at 25C Insulation Resistance (IR) Minimum Limit at 25C -55C to +125C 30 ppm/C 0% 250% of rated voltage (5 1 seconds and charge/discharge not exceeding 50 mA) 0.1% 1,000 M F or 100 G (Rated voltage applied for 120 5 seconds at 25C) DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor. 2 Capacitance and dissipation factor (DF) measured under the following conditions: 1 MHz 100 kHz and 1.0 0.2 Vrms if capacitance 1,000 pF 1 kHz 50 Hz and 1.0 0.2 Vrms if capacitance > 1,000 pF 3 To obtain IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as automatic level control (ALC). The ALC feature should be switched to "ON." 1 Post Environmental Limits Post Environmental Limits Dielectric Rated DC Voltage Capacitance Dissipation Factor (Maximum %) Capacitance Shift Insulation Resistance C0G All All 0.5 0.3% or 0.25 pf 10% of Initial limit (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 6 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Table 1B - Product Availability and Chip Thickness Waterfall - Standard Termination Case Size/ Series Capacitance Cap Code C0402C Rated Voltage (VDC) 25 50 63 100 25 50 63 Voltage Code 3 5 M 1 3 5 M Cap Tolerance 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF C0603C 102 152 222 332 472 682 103 153 223 333 473 683 104 C0805C 100 200 1 2 25 50 63 3 5 M C1206C 100 200 250 1 2 A 25 50 63 3 5 M 100 200 250 1 2 A Product Availability and Chip Thickness Codes - See Packaging Specs for Chip Thickness Dimensions BB BB BB BB BB BB BB F = 1% G = 2% J = 5% K = 10% M = 20% CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF DD DR DR DR DD DG DD DG DF DG DG DD DR DR DR DD DG DD DG DF DD DR DR DR DD DG DD DG DD DR DR DR DD DG DD DG DD DR DR DR DD DG DD DR DR DR DD DG EQ ER ET EQ EQ EQ ER EF EH EF EH EH EH EQ ER ET EQ EQ EQ ER EF EH EF EH EH EQ ER ET EQ EQ EQ ER EF EH EF EH EQ ER ET EQ EQ EQ ER EF EH EF EH EQ ER ET EQ EQ EQ ER EF EH EQ ER ET EQ EQ EQ ER EF EH Table 1C - Product Availability and Chip Thickness Waterfall - Flexible Termination Case Size/ Series Capacitance Cap Code 102 152 222 332 472 682 103 153 223 333 473 683 104 C0805C C1206C Rated Voltage (VDC) 25 50 63 100 200 25 50 63 100 200 250 25 50 63 100 200 250 Voltage Code 3 5 M 1 2 3 5 M 1 2 A 3 5 M 1 2 A Cap Tolerance 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF C0603C F = 1% G = 2% J = 5% K = 10% M = 20% Product Availability and Chip Thickness Codes - See Packaging Specs for Chip Thickness Dimensions CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ CJ (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com CJ CJ CJ DD DR DR DR DD DG DD DG DF DG DG DD DR DR DR DD DG DD DG DF DD DR DR DR DD DG DD DG DD DR DR DR DD DG DD DG DD DR DR DR DD DG DD DR DR DR DD DG EQ ER ET EQ EQ EQ ER EF EH EF EH EH EH EQ ER ET EQ EQ EQ ER EF EH EF EH EH EQ ER ET EQ EQ EQ ER EF EH EF EH EQ ER ET EQ EQ EQ ER EF EH EF EH EQ ER ET EQ EQ EQ ER EF EH C1091_C0G_ESD * 9/15/2020 EQ ER ET EQ EQ EQ ER EF EH 7 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Table 2 - Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel BB CF CJ DD DF DG DR EB EC EE 0402 0603 0603 0805 0805 0805 0805 1206 1206 1206 0.50 0.05 0.80 0.07* 0.80 0.15* 0.90 0.10 1.10 0.10 1.25 0.15 0.78 0.20 0.78 0.10 0.90 0.10 1.10 0.10 10,000 4,000 4,000 0 0 0 0 0 0 0 50,000 15,000 15,000 0 0 0 0 0 0 0 0 0 0 4,000 2,500 2,500 4,000 4,000 4,000 2,500 0 0 0 10,000 10,000 10,000 10,000 10,000 10,000 10,000 EF EH EQ ER ET 1206 1206 1206 1206 1206 1.20 0.15 1.60 0.20 0.78 0.20 0.90 0.20 1.10 0.20 0 0 0 0 0 0 0 0 0 0 2,500 2,000 4,000 4,000 2,500 10,000 8,000 10,000 10,000 10,000 Table 3 - Bulk Packaging Quantities Loose Packaging Packaging Type Bulk Bag (default) Packaging C-Spec1 N/A 2 Case Size Packaging Quantities (pieces/unit packaging) EIA (in) Metric (mm) 0402 0603 0805 1005 1608 2012 1206 1210 1808 1812 1825 2220 2225 3216 3225 4520 4532 4564 5650 5664 Minimum Maximum 50,000 1 20,000 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details. Commercial grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk bag packaging option for automotive grade products. 2 A packaging C-Spec (see note 1 above) is not required for "Bulk Bag" packaging (excluding Anti-Static Bulk Bag and automotive grade products.) The 15th through 22nd character positions of the ordering code should be left blank. All products ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 8 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Table 4 - Land Pattern Design Recommendations per IPC-7351 EIA Size Code Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) C Y X V1 Density Level B: Median (Nominal) Land Protrusion (mm) V2 C Y X Density Level C: Minimum (Least) Land Protrusion (mm) V1 V2 C Y X V1 V2 Without Flexible Termination 0402 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.40 0.52 0.52 1.60 0.80 0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70 1206 3216 1.60 1.35 1.90 5.60 2.90 1.50 1.15 1.80 4.70 2.30 1.40 0.95 1.70 4.00 2.00 With Flexible Termination 0603 1608 0.85 1.25 1.10 4.00 2.10 0.75 1.05 1.00 3.10 1.50 0.65 0.85 0.90 2.40 1.20 0805 2012 0.99 1.44 1.66 4.47 2.71 0.89 1.24 1.56 3.57 2.11 0.79 1.04 1.46 2.42 1.81 1206 3216 1.59 1.62 2.06 5.85 3.06 1.49 1.42 1.96 4.95 2.46 1.39 1.22 1.86 4.25 2.16 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC-7351). V1 Y Y X X C C V2 Grid Placement Courtyard (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 9 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Soldering Process Recommended Soldering Technique * Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 * All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering Profile The KEMET families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020 standard for moisture sensitivity testing. These devices can safely withstand a maximum of three reflow passes at these conditions. Termination Finish TP 100% Matte Sn Preheat/Soak Temperature minimum (TSmin) Temperature maximum (TSmax) Time (tS) from TSmin to TSmax 150C 200C 60 - 120 seconds Ramp-up rate (TL to TP) 3C/second maximum Liquidous temperature (TL) 217C Time above liquidous (tL) 60 - 150 seconds Peak temperature (TP) 260C Time within 5C of maximum peak temperature (tP) 30 seconds maximum Ramp-down rate (TP to TL) 6C/second maximum Time 25C to peak temperature 8 minutes maximum TL Temperature Profile Feature tP Maximum Ramp-up Rate = 3C/second Maximum Ramp-down Rate = 6C/second tL Tsmax Tsmin 25 ts 25C to Peak Time Note : All temperatures refer to the center of the package, measured on the capacitor body surface that is facing up during assembly reflow. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 10 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Table 5 - Performance & Reliability: Test Methods and Conditions Stress Reference Test or Inspection Method Terminal Strength JIS-C-6429 Appendix 1, Note: Force of 1.8 kg for 60 seconds. Board Flex JIS-C-6429 Appendix 2, Note: Standard termination system - 2.0 mm (minimum) for all except 3 mm for C0G. Flexible termination system - 3.0 mm (minimum). Magnification 50 X. Conditions: Solderability J-STD-002 a) Method B, 4 hours at 155C, dry heat at 235C b) Method B at 215C, category 3 c) Method D at 260C, category 3 Temperature Cycling JESD22 Method JA-104 1,000 Cycles (-55C to +125C). Measurement at 24 hours 4 hours after test conclusion. Load humidity: 1,000 hours 85C/85% RH and rated voltage. Add 100 K ohm resistor. Measurement at 24 hours 4 hours after test conclusion. Low volt humidity: 1,000 hours 85C/85% RH and 1.5 V. Add 100 K ohm resistor. Measurement at 24 hours 4 hours after test conclusion. t = 24 hours/cycle. Steps 7a and 7b not required. Measurement at 24 hours 4 hours after test conclusion. -55C/+125C. Note: Number of cycles required - 300. Maximum transfer time - 20 seconds. Dwell time - 15 minutes. Air - Air. Biased Humidity MIL-STD-202 Method 103 Moisture Resistance MIL-STD-202 Method 106 Thermal Shock MIL-STD-202 Method 107 High Temperature Life MIL-STD-202 Method 108/EIA-198 Storage Life MIL-STD-202 Method 108 150C, 0 VDC for 1,000 hours. Vibration MIL-STD-202 Method 204 5 g's for 20 minutes, 12 cycles each of 3 orientations. Note: use 8" X 5" PCB 0.031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 - 2,000 Hz Mechanical Shock Resistance to Solvents MIL-STD-202 Method 213 MIL-STD-202 Method 215 1,000 hours at 125C (85C for X5R, Z5U and Y5V) with 2 X rated voltage applied. Figure 1 of Method 213, Condition F. Add aqueous wash chemical, OKEM Clean or equivalent. Storage and Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 11 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Construction - Standard Termination Detailed Cross Section Barrier Layer (Ni) Termination Finish (100% Matte Sn) Dielectric Material (CaZrO3) Dielectric Material (CaZrO3) End Termination/ External Electrode (Cu) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Inner Electrodes (Ni) Construction - Flexible Termination Detailed Cross Section Dielectric Material (CaZrO3) End Termination/ External Electrode (Cu) Epoxy Layer (Ag) Dielectric Material (CaZrO3) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Epoxy Layer (Ag) Barrier Layer (Ni) Inner Electrodes (Ni) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Termination Finish (100% Matte Sn) C1091_C0G_ESD * 9/15/2020 12 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Capacitor Marking (Optional) Laser marking option is not available on: * C0G, ultra stable X8R and Y5V dielectric devices * EIA 0402 case size devices * EIA 0603 case size devices with flexible termination option. * KPS commercial and automotive grade stacked devices. These capacitors are supplied unmarked only. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 13 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Tape & Reel Packaging Information KEMEToffersmultilayerceramicchipcapacitorspackagedin8,12and16mmtapeon7"and13"reelsinaccordancewith EIAStandard481.Thispackagingsystemiscompatiblewithalltape-fedautomaticpickandplacesystems.SeeTable2for detailsonreelingquantitiesforcommercialchips. Bar code label Anti-static reel (R) Embossed plastic* or punched paper carrier. ET KEM Chip and KPS orientation in pocket (except 1825 commercial, and 1825 and 2225 Military) Sprocket holes Embossment or punched cavity 8 mm, 12 mm or 16 mm carrier tape 180 mm (7.00") or 330 mm (13.00") Anti-static cover tape (0.10 mm (0.004") maximum thickness) *EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. Table 6 - Carrier Tape Configuration, Embossed Plastic & Punched Paper (mm) EIA Case Size Tape Size (W)* Embossed Plastic 7" Reel 13" Reel Pitch(P1)* Punched Paper 7" Reel 13" Reel Pitch(P1)* 01005-0402 8 2 2 0603 8 2/4 2/4 0805 8 4 4 4 4 1206-1210 8 4 4 4 4 1805-1808 12 4 4 1812 12 8 8 KPS 1210 12 8 8 KPS 1812 and 2220 16 12 12 Array 0612 8 4 4 *Refer to Figures 1 and 2 for W and P1 carrier tape reference locations. *Refer to Tables 6 and 7 for tolerance specifications. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com New 2 mm Pitch Reel Options* Packaging Ordering Code (C-Spec) Packaging Type/Options C-3190 C-3191 C-7081 C-7082 Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked * 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development. Benefits of Changing from 4 mm to 2 mm Pitching Spacing * Lower placement costs. * Doublethepartsoneachreelresultsinfewerreel changesandincreasedefficiency. * Fewerreelsresultinlowerpackaging,shippingand storage costs, reducing waste. C1091_C0G_ESD * 9/15/2020 14 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 OD0 (10 pitches cumulative tolerance on tape 0.2 mm) P0 A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity OD1 Cover Tape B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 7 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5+0.10/-0.0 (0.059+0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) R Reference S1 Minimum T Note 2 Note 3 Maximum 25.0 (0.984) 1.75 0.10 4.0 0.10 2.0 0.05 0.600 0.600 (0.069 0.004) (0.157 0.004) (0.079 0.002) (0.024) (0.024) 30 (1.181) E1 P0 P2 T1 Maximum 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm 16 mm B1 Maximum Note 4 4.35 Single (4 mm) (0.171) Single (4 mm) 8.2 and Double (8 mm) (0.323) 12.1 Triple (12 mm) (0.476) Pitch E2 Minimum 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) F P1 3.5 0.05 4.0 0.10 (0.138 0.002) (0.157 0.004) 5.5 0.05 8.0 0.10 (0.217 0.002) (0.315 0.004) 7.5 0.05 12.0 0.10 (0.138 0.002) (0.157 0.004) T2 Maximum 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) W Maximum 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) A0,B0 & K0 Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 6.) 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481, paragraph 4.3, section b.) 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes, and 10 maximum for 16 mm tapes (see Figure 3.) (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape, and to 1.0 mm maximum for 16 mm tape (see Figure 4.) (e) for KPS product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see addendum in EIA Standard 481 for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 15 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Figure 2 - Punched (Paper) Carrier Tape Dimensions T Po ODo (10 pitches cumulative tolerance on tape 0.2 mm) A0 F P1 T1 T1 Top Cover Tape W E2 B0 Bottom Cover Tape E1 G Cavity Size, See Note 1, Table 7 Center Lines of Cavity Bottom Cover Tape User Direction of Unreeling Table 8 - Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 E1 P0 P2 T1 Maximum G Minimum 8 mm 1.5+0.10-0.0 (0.059+0.004-0.0) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 0.10 (0.004) maximum R Reference Note 2 0.75 (0.030) 25 (0.984) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Half(2mm) 8 mm Single (4 mm) E2 Minimum F P1 T Maximum W Maximum A0 B 0 6.25 (0.246) 3.5 0.05 (0.138 0.002) 2.0 0.05 (0.079 0.002) 4.0 0.10 (0.157 0.004) 1.1 (0.098) 8.3 (0.327) 8.3 (0.327) Note 1 1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum (see Figure 3.) d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4.) e) see addendum in EIA Standard 481 for standards relating to more precise taping requirements. 2. The tape with or without components shall pass around R without damage (see Figure 6.) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 16 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 kg minimum. 2. Cover Tape Peel Strength: Thetotalpeelstrengthofthecovertapefromthecarriertapeshallbe: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) Thedirectionofthepullshallbeoppositethedirectionofthecarriertapetravel.Thepullangleofthecarriertapeshallbe 165to180fromtheplaneofthecarriertape.Duringpeeling,thecarrierand/orcovertapeshallbepulledatavelocityof 300 10 mm/minute. 3. Labeling:Barcodelabeling(standardorcustom)shallbeonthesideofthereeloppositethesprocketholes.Refer to EIA Standards 556 and 624. Figure 3 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 200 10 Bo T) Typical Component Centerline Ao Figure 4 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum s Tape Width (mm) 8,12 16 - 56 72 - 200 Maximum Rotation ( 20 10 5 Figure 5 - Bending Radius Embossed Carrier 16 mm Tape S) Punched Carrier 1.0 mm maximum 1.0 mm maximum R (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Bending Radius R C1091_C0G_ESD * 9/15/2020 17 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Figure 6 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 9 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0+0.5/-0.2 (0.521+0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4+1.5/-0.0 (0.331+0.059/-0.0) 12.4+2.0/-0.0 (0.488+0.078/-0.0) 16.4+2.0/-0.0 (0.646+0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shallaccommodatetape widthwithoutinterference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 18 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) Figure 7 - Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum leader 400 mm minimum Top Cover Tape Figure 8 - Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 19 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) ESD, C0G Dielectric, 25 - 250 VDC (Commercial & Automotive Grade) KEMET Electronics Corporation Sales Offices Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales. Disclaimer Allproductspecifications,statements,informationanddata(collectively,the"Information")inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation's("KEMET")knowledgeoftypicaloperatingconditionsforsuch applications,butarenotintendedtoconstitute-andKEMETspecificallydisclaims-anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse. TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any technicaladviceinferredfromthisInformationorotherwiseprovidedbyKEMETwithreferencetotheuseofKEMET'sproductsisgivengratis,andKEMETassumes noobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponent failuresmaystilloccur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards (suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury or property damage. Althoughallproduct-relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatother measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com C1091_C0G_ESD * 9/15/2020 20