Bushing Dimension
7Length = 7 mm Fixed Pillar
Nwithout locating pin
Dimensions are shown: mm (inch)
Dimensions subject to change
www.ittcannon.com
3
Navigation
C
NSE11 Series
Navigation Switch Encoders
NOTE: Specifications listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Features/Benefits
•Select switch
•Metallic shaft
•Self clinching terminals
•Positive detent feeling
•Large variety of shaft
Typical Applications
•Audio / Video equipment
•Navigation systems
•Computer peripherals
•Car radio
Electrical
MAXIMUM VOLTAGE: 5 VDC.
MAXIMUM CURRENT DC: 10 mA
MINIMUM CURRENT DC: 1 mA
DIELECTRIC STRENGTH: 300 VAC / 1 mA.
INSULATION RESISTANCE: 100 MΩmin.
BOUNCE TIME: ≤2 ms
Switch Function
CONTACT: SPST
MAXIMUM POWER: 5 VDC 10 mA (min. 1 mA)
CONTACT RESISTANCE: Initial 100mΩ
TRAVEL: 0,5 mm +/- 0,4 mm
OPERATING FORCE: 4,5 +/- 1,5 N
LIFE TIME: 20,000 operations
Environmental
OPERATING TEMPERATURE: -30˚C to +70˚C.
STORAGE TEMPERATURE: -40˚C to +85˚C.
Process
SOLDERING PROCESS:
Manual soldering 300˚C max., 3s max.
Wave soldering 260˚C max., 3s max.
No cleaning.
Mechanical
NUMBER OF DETENT: 20 or 30
DETENT TORQUE: 3 - 20 mN.m
ROTATIONAL ANGLE: 360˚ endless.
ROTATIONAL LIFE: 15,000 cycles (1 cycle: 360˚ CW + 360˚ CCW).
Construction
FUNCTION: Incremental signal + select switch.
CONTACT ARRANGEMENT: Phase difference output of two signal
A and B.
TERMINAL: PC pin.
Number Number Bracket Select
of Pulse of Detent Spacing Function Designation
15 30 11 mm No NSE11DV57NCF215A
20 20 11 mm No NSE11DV57NCF220A
15 30 11 mm Yes NSE11DSV57NAF215A
20 20 11 mm Yes NSE11DSV57NAF220A
15 30 13,8 mm Yes NSE11DSV57NAF215F
20 20 13,8 mm Yes NSE11DSV57NAF220F
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired
option from each category and place it in the appropriate box.
N S E D S V1 1
Detent
DWith detent
Switching Function
(NONE) No Switch
SSwitch Appearance Type
VVertical axis Pulse
15 15 pulse
20 20 pulse
57 N F2
Terminal Length
5 4,2 mm
Shaft Type
F with a flat
Shaft Length & Push Switch Slot
AWith select; Length of Shaft = 12,5 mm; push switch slot 0,5 mm
C Without select; Length of Shaft = 13 mm; no push switch slot
Flat Length
2 10 mm
Bracket Spacing
A11 mm
F 13,8 mm