TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Description Features Due to smaller size (fit the standard dimensions of * RoHS compliant 2.5" IDE Hard Disk Drives), huge capacity, high * Fully compatible with devices and OS that support the IDE standard (44-Pin, pitch = 2.00 mm) * Non-volatile Flash Memory for outstanding data retention * Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer * Supports up to Ultra DMA Mode 6 * Shock resistance speed, and low power consumption, Solid State Disk is perfect replacement storage device for PCs, Laptops, gaming systems, and handheld devices. Placement B C Dimensions Side Millimeters Inches A 100.30 0.40 3.949 0.016 B 69.85 0.20 2.750 0.008 C 7.40 0.15 0.291 0.004 A Transcend Information Inc. 1 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Specifications Physical Specification Form Factor 2.5-inch HDD Storage Capacities 8 GB to 128 GB Dimensions (mm) Length 100.3 0 0.40 Width 69.85 0.20 Height 7.40 0.15 Input Voltage 3.3V/5V 5% Weight 55g 5g Connector 44-Pin standard IDE/ATA connector (Pitch 2.0 mm) Environmental Specifications Operating Temperature 0 to 70 Storage Temperature - 40 to 85 Power Requirements 5V 5% @25 Input Voltage Mode Power Consumption (8/16/32GB) Power Consumption (64/128GB) Max. (mA) Max. (W) Write(peak) 325.5 1.6 Read(peak) 295.7 1.5 Idle(peak) 156.8 0.8 Write(peak) 354.8 1.8 Read(peak) 312.6 1.6 Idle(peak) 156.3 0.8 Interface Specification Jumper Settings ATA Compatibility Transcend Information Inc. Master/Slave/Cable-select Settings ATA/ATAPI 6 UDMA Modes 6 2 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Performance Model P/N Sequential Read(Max.) Sequential Write(Max.) TS8GSSD25-S 74 MB/s 62 MB/s TS16GSSD25-S 74 MB/s 62 MB/s TS32GSSD25-M 74 MB/s 45 MB/s TS32GSSD25-S 74 MB/s 62 MB/s TS64GSSD25-M 75 MB/s 45 MB/s TS64GSSD25-S 80 MB/s 70 MB/s TS128GSSD25-M 68 MB/s 46 MB/s Actual Capacity Model P/N User Max. LBA Cylinder Head Sector TS8GSSD25-S 15,604,848 15,498 16 63 TS16GSSD25-S 31,244,288 16,383 16 63 TS32GSSD25-S 63,078,400 16,383 16 63 TS32GSSD25-M 62,521,344 16,383 16 63 TS64GSSD25-S 126,189,568 16,383 16 63 TS64GSSD25-M 125,206,528 16,383 16 63 TS128GSSD25-M 252,411,904 16,383 16 63 Transcend Information Inc. 3 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Reliability Data Reliability Supports BCH ECC 8 bits / 15 bits in 512 bytes Data Retention 10 years MTBF 1,000,000 hours Vibration Operating 3.0G, 5 - 800Hz Non-Operating 3.0G, 5 - 800Hz * Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5 hr./axis, total 1.5 hrs. Shock Operating 1500G, 0.5ms Non-Operating 1500G, 0.5ms * Note: Reference to the IEC 60068-2-27 Testing procedures; Operating-Half-sine wave, 1500g, 0.5ms, 3 times/dir., total 18 times. Regulations Compliance CE, FCC and BSMI Transcend Information Inc. 4 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Package Dimensions Below figure illustrates the Transcend 2.5" Solid State Disk. All dimensions are in mm. *Note: Tighten mounting screws with no more than 1.0Kg-cm (0.07ft-lbs) of torque. Transcend Information Inc. 5 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Pin Assignments Pin No. Pin Name Pin No. Pin Name 01 03 05 -RESET DD7 DD6 02 04 06 GND DD8 DD9 07 09 11 13 15 17 19 21 DD5 DD4 DD3 DD2 DD1 DD0 GND DMARQ 08 10 12 14 16 18 20 22 DD10 DD11 DD12 DD13 DD14 DD15 KEY-PIN (OPEN) GND 23 25 27 29 31 33 35 37 -DIOW : STOP -DIOR : -HDMARDY : HSTROBE IORDY : DDMARDY : DSTROBE -DMACK INTRQ DA1 DA0 -CS0 24 26 28 30 32 34 36 38 GND GND CSEL GND IOCS16B -PDIAG : -CBLID DA2 -CS1 39 41 43 -DASP VCC GND 40 42 44 GND VCC NC (No Connect) Pin Layout 2 44 20 1 Master Mode Transcend Information Inc. 43 Slave Mode Cable Select 6 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Block Diagram Transcend Information Inc. 7 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Reliability Wear-Leveling algorithm The controller supports static/dynamic wear leveling. When the host writes data, the controller will find and use the block with the lowest erase count among the free blocks. This is known as dynamic wear leveling. When the free blocks' erase count is higher than the data blocks', it will activate the static wear leveling, replacing the not so frequently used user blocks with the high erase count free blocks. ECC algorithm The controller uses BCH8/BCH15 ECC algorithm per 512 bytes according to structure of flash. BCH8/BCH15 can correct up to 8 or 15 random error bits within 512 data bytes. Bad-block management When the flash encounters ECC failed, program fail or erase fail, the controller will mark the block as bad block to prevent the used of this block and caused data lost later on. Transcend Information Inc. 8 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Support ATA/ATAPI PARAMETERS USED Code SC SN CY DR HD FT CHECK POWER MODE E5h X X X O X X EXECUTE DIAGNOSTICS 90h X X X O X X FLUSH CACHE E7h X X X O O X FLUSH CACHE EXT EAh X X X O O X IDENTIFY DEVICE ECh X X X O X X IDLE E3h O X X O X X IDLE IMMEDIATE E1h X X X O X X INITIALIZE DEVICE PARAMETERS 91h O X X O O X READ BUFFER E4h X X X O X X C8h or C9h O O O O O X READ DMA EXT 25h O O O O O X READ FPDMA QUEUED 60h O O O O O O READ LOG EXT 2Fh O O O O O O READ MULTIPLE C4h O O O O O X READ MULTIPLE EXT 29h O O O O O X 20h or 21h O O O O O X 24h O O O O O X 40h or 41h O O O O O X READ VERIFY SECTOR(S) EXT 42h O O O O O X RECALIBRATE 10h X X X O X X SECURITY DISABLE PASSWORD F6h X X X O X X SECURITY ERASE PREPARE F3h X X X O X X SECURITY ERASE UNIT F4h X X X O X X SECURITY FREEZE LOCK F5h X X X O X X SECURITY SET PASSWORD F1h X X X O X X SECURITY UNLOCK F2h X X X O X X SEEK 7xh X X O O O X SET FEATURES EFh O X X O X O Command ListCommand Name READ DMA READ SECTOR(S) READ SECTOR(S) EXT READ VERIFY SECTOR(S) Transcend Information Inc. 9 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk SET MULTIPLE MODE C6h O X X O X X SLEEP E6h X X X O X X SMART B0h X X O O X O STANDBY E2h X X X O X X STANDBY IMMEDIATE E0h X X X O X X WRITE BUFFER E8h X X X O X X CAh or CBh O O O O O X WRITE DMA EXT 35h O O O O O X WRITE DMA FUA EXT 3Dh O O O O O X WRITE FPDMA QUEUED 61h O O O O O O WRITE MULTIPLE C5h O O O O O X WRITE MULTIPLE EXT 39h O O O O O X WRITE MULTIPLE FUA EXT CEh O O O O O X 30h or 31h O O O O O X 34h O O O O O X WRITE DMA WRITE SECTOR(S) WRITE SECTOR(S) EXT Note: O = Valid, X = Don't care SC = Sector Count Register SN = Sector Number Register CY = Cylinder Low/High Register DR = DEVICE SELECT Bit (DEVICE/HEAD Register Bit 4) HD = HEAD SELECT Bit (DEVICE/HEAD Register Bit 3-0) FT = Features Register Transcend Information Inc. 10 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk ATA Command Specifications CHECK POWER MODE (E5h) The host can use this command to determine the current power management mode. EXECUTE DIAGNOSTICS (90h) This command performs the internal diagnostic tests implemented by the drive. FLUSH CACHE (E7h) This command is used by the host to request the device to flush the write cache. If there is data in the write cache, that data shall be written to the media. The BSY bit shall remain set to one until all data has been successfully written or an error occurs. FLUSH CACHE EXT (EAh) 48-bit feature set mandatory command. This command is used by the host to request the device to flush the write cache. If there is data in the write cache, that data shall be written to the media. The BSY bit shall remain set to one until all data has been successfully written or an error occurs. IDENTIFY DEVICE (ECh) This commands read out 512Bytes of drive parameter information. Parameter Information consists of the arrangement and value as shown in the following table. This command enables the host to receive the Identify Drive Information from the device. Transcend Information Inc. 11 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Identify Device Information Default Value Word 0 Value 0040h F/V Description F General configuration bit-significant information: 15 0 = ATA device X X 14-8 Retired 7-6 Obsolete X V 5-3 2 Retired Reserved X 1 0 Retired Reserved Number of logical cylinders 1 3C8Ah F 15498 (8GB capacity) 16383 (above 16GB capacity) 3FFFh 2 C837h V Specific configuration 3 0010h F Number of logical heads 4-5 0000h X Retired 6 003Fh F Number of logical sector per logical track 7-8 0000h 9 0000h X Retired 10-19 XXXXh F Serial number (20 ASCII characters) 20-21 0000h X Retired 22 0000h X Obsolete 23-26 XXXXh F Firmware revision (8 ASCII characters) 27-46 XXXXh F Model number (40 ASCII characters) 47 8001h F F 15-8 80h 7-0 00h = Reserved Reserved for assignment by the CompactFlash_ Association F 48 0000h F 01h = Maximum number of 1 sectors on READ/WRITE MULTIPLE commands Reserved Capabilities F 15-14 Reserved for the IDENTIFY PACKET DEVICE command. 13 1 = Standby timer values as specified in this standard are supported 12 49 2F00h 0 = Standby timer values shall be managed by the device Reserved for the IDENTIFY PACKET DEVICE command. F 11 1 = IORDY supported 0 = IORDY may be supported F F 10 9 1 = IORDY may be disabled 1 = LBA supported F X 8 7-0 1 = DMA supported. Retired Transcend Information Inc. 12 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Capabilities 50 15 14 X 13-2 Reserved. 1 Obsolete 4000h 51 0000h 52 0000h 53 F F 0007h Shall be cleared to zero. Shall be set to one. F 0 F 15-8 PIO data transfer cycle timing mode 7-0 Reserved Shall be set to one to indicate a device specific Standby timer value minimum. X Obsolete F 15-3 F 2 1 = the fields reported in word 88 are valid 0 = the fields reported in word 88 are not valid F 1 1 = the fields reported in words 70:64 are valid 0 = the fields reported in words 70:64 are not valid X 0 1 = the fields reported in words 58:54 are valid 0 = the fields reported in words 58:54 are not valid Reserved 54 XXXXh X Number of current cylinders 55 00XXh X Number of current heads 56 XXXXh X Number of current sector per track 57-58 XXXXh X Current capacity in sectors 59 0101h V V 8 7-0 60-61 XXXXh F Total number of user addressable sectors 62 0000h X Obsolete 15-9 63 0007h Reserved 1 = Multiple sector setting is valid xxh = Setting for number of sectors that shall be transferred per interrupt on R/W Multiple command F 15-11 Reserved V 10 1 = Multiword DMA mode 2 is selected 0 = Multiword DMA mode 2 is not selected V 9 1 = Multiword DMA mode 1 is selected 0 = Multiword DMA mode 1 is not selected V 8 1 = Multiword DMA mode 0 is selected 0 = Multiword DMA mode 0 is not selected F 7-3 2 Reserved 1 = Multiword DMA mode 2 and below are supported F F 1 0 1 = Multiword DMA mode 1 and below are supported 1 = Multiword DMA mode 0 is supported F 15-8 Reserved 7-0 Advanced PIO modes supported 64 0003h 65 0078h F Minimum Multiword DMA transfer cycle time per word 66 0078h F Manufacturer's recommended Multiword DMA transfer cycle time 67 0078h F Minimum PIO transfer cycle time without flow control 68 0078h F Minimum PIO transfer cycle time with IORDY flow control 69-70 0000h Transcend Information Inc. Reserved 13 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk 71-74 0000h Reserved for the IDENTIFY PACKET DEVICE command 75 0000h Queue depth 15-5 Reserved F 4-0 Maximum queue depth - 1 Serial ATA Capabilities 76 0002h F 15-11 Reserved for Serial ATA 10 1 = Supports Phy Event Counts F F 9 8 1 = Supports receipt of host initiated power management requests 1 = Supports the NCQ feature set F 7-3 2 Reserved for Serial ATA 1 = Supports SATA Gen2 Signaling Speed (3.0Gb/s) F F 77 0000h 1 1 = Supports SATA Gen1 Signaling Speed (1.5Gb/s) 0 Shall be cleared to zero Reserved for Serial ATA Serial ATA feature supported 15-7 Reserved for Serial ATA 78 0000h F 6 5 1 = Device supports Software Settings Preservation Reserved for Serial ATA F F 4 3 1 = Device supports in-order data delivery 1 = Device supports initiating power management F F 2 1 1 = Device supports DMA Setup auto-activation 1 = Device supports non-zero buffer offsets F 0 Shall be cleared to zero Serial ATA feature enabled 15-7 Reserved for Serial ATA 79 0000h V 6 5 1 = Software Settings Preservation enabled Reserved for Serial ATA V V 4 3 1 = In-order data delivery enabled 1 = Device initiated power management enabled V V 2 1 1 = DMA Setup auto-activation enabled 1 = Non-zero buffer offsets enabled 0 Shall be cleared to zero F Major version number 0000h or FFFFh = device does not report version 15 Reserved 80 00F0h F F 14 13 Reserved for ATA/ATAPI-14 Reserved for ATA/ATAPI-13 F F 12 11 Reserved for ATA/ATAPI-12 Reserved for ATA/ATAPI-11 F F 10 9 Reserved for ATA/ATAPI-10 Reserved for ATA/ATAPI-9 F F 8 7 Reserved for ATA/ATAPI-8 1 = supports ATA/ATAPI-7 F F 6 5 1 = supports ATA/ATAPI-6 1 = supports ATA/ATAPI-5 F F 4 3 1 = supports ATA/ATAPI-4 Obsolete X 2 Obsolete Transcend Information Inc. 14 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk X 81 82 83 0000h 304Bh 7400h 1 Obsolete 0 Reserved F Minor version number X Command and feature sets supported 15 Obsolete F F 14 13 1 = NOP command supported 1 = READ BUFFER command supported F X 12 11 1 = WRITE BUFFER command supported Obsolete F F 10 9 1 = Host Protected Area feature set supported 1 = DEVICE RESET command supported F F 8 7 1 = SERVICE interrupt supported 1 = release interrupt supported F F 6 5 1 = look-ahead supported 1 = write cache supported F F 4 3 Shall be cleared to zero to indicate that the PACKET Command feature set is not supported. 1 = mandatory Power Management feature set supported F F 2 1 1 = Removable Media feature set supported 1 = Security Mode feature set supported F 0 1 = SMART feature set supported F Command and feature sets supported 15 Shall be cleared to zero F F 14 13 Shall be set to one 1 = The FLUSH CACHE EXT command is supported F F 12 11 Shall be set to one to indicate that the mandatory FLUSH CACHE command is supported 1 = The DCO feature set is supported F F 10 9 1 = The 48-bit Address feature set is suported 1 = The AAM feature set is supported F 8 7 1 = SET MAX security extension supported Reserved F F 6 5 1 = SET FEATURES subcommand required to spinup after power-up 1 = Power-Up In Standby feature set supported F F 4 3 1 = Removable Media Status Notification feature set supported 1 = Advanced Power Management feature set supported F F 2 1 1 = CFA feature set supported 1 = READ/WRITE DMA QUEUED supported F 0 1 = DOWNLOAD MICROCODE command supported Command and feature sets supported 84 4060h F F 15 14 F 13 1 = The IDLE IMMEDIATE command with UNLOAD feature is supported 12-11 Reserved for TLC X F 10-9 Obsolete 8 1 = The 64-bit World wide name is supported F F 7 6 1 = The WRITE DMA QUEUED FUA EXT command is supported 1 = The WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported F 5 1 = The GPL feature set is supported Transcend Information Inc. Shall be cleared to zero Shall be set to one 15 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 85 86 3069h 3400h 2.5" Solid State Disk F 4 1 = The Streaming feature set is supported F F 3 2 1 = The Media Card Pass Through Command feature set is supported 1 = Media serial number is supported F F 1 0 1 = SMART self-test supported 1 = SMART error logging supported X Command and feature sets supported or enable (Depend on the host enabling) 15 Obsolete F F 14 13 1 = The NOP command is supported 1 = The READ BUFFER command is supported F X 12 11 1 = The WRITE BUFFER command is supported Obsolete V F 10 9 1 = HPA feature set is supported Shall be cleared to zero to indicate that the DEVICE RESET command is not supported V V 8 7 1 = The SERVICE interrupt is enabled 1 = The release interrupt is enabled V V 6 5 1 = Read look-ahead is enabled 1 = The volatile write cache is enabled F F 4 3 Shall be cleared to zero to indicate that the PACKET Command feature set is not supported. Shall be set to one to indicate that the mandatory Power Management feature is supported X V 2 1 Obsolete 1 = The Security feature set is enabled V 0 1 = The SMART feature set is enabled F Command and feature sets supported or enable (Depend on the host enabling) 15 1 = Words 119-120 are valid F 14 13 Reserved 1 = FLUSH CACHE EXT command supported F F 12 11 1 = FLUSH CACHE command supported 1 = The DCO feature set is supported F V 10 9 1 = The 48-bit Address feature set is supported 1 = The AAM feature set is enable V 8 7 1 = The SET MAX security extension is enabled by SET MAX SET PASSWORD Reserved for Address Offset Reserved Area Boot Method F V 6 5 1 = SET FEATURES subcommand required to spin-up after power-up 1 = The PUIS feature set is enabled X V 4 3 Obsolete 1 = The APM feature set is enabled F F 2 1 1 = The CFA feature set is supported 1 = The TCQ feature set is supported F 0 1 = The DOWNLOAD MICROCODE command is supported Command and feature sets supported or enabled (Depend on the host enabling) 87 F F 15 14 F 13 1 = The IDLE IMMEDIATE command with UNLOAD feature is supported 12-11 Reserved for TLC X F 10-9 Obsolete 8 1 = The 64-bit World wide name is supported F F 7 6 4060h Transcend Information Inc. Shall be cleared to zero Shall be set to one 1 = The WRITE DMA QUEUED FUA EXT command is supported 1 = The WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported 16 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk F 5 1 = The GPL feature set is supported X V 4 3 Obsolete 1 = The Media Card Pass Through Command feature set is supported V F 2 1 1 = Media serial number is supported 1 = SMART self-test supported F 0 1 = SMART error logging supported Ultra DMA modes(XX depends on the host selecting) 88 XX7Fh V 15 14 Reserved 1 = Ultra DMA mode 6 is selected V 13 0 = Ultra DMA mode 6 is not selected 1 = Ultra DMA mode 5 is selected V 12 0 = Ultra DMA mode 5 is not selected 1 = Ultra DMA mode 4 is selected V 11 0 = Ultra DMA mode 4 is not selected 1 = Ultra DMA mode 3 is selected V 10 0 = Ultra DMA mode 3 is not selected 1 = Ultra DMA mode 2 is selected V 9 0 = Ultra DMA mode 2 is not selected 1 = Ultra DMA mode 1 is selected V 8 0 = Ultra DMA mode 1 is not selected 1 = Ultra DMA mode 0 is selected 7 0 = Ultra DMA mode 0 is not selected Reserved F F 6 5 1 = Ultra DMA mode 6 and below are supported 1 = Ultra DMA mode 5 and below are supported F F 4 3 1 = Ultra DMA mode 4 and below are supported 1 = Ultra DMA mode 3 and below are supported F F 2 1 1 = Ultra DMA mode 2 and below are supported 1 = Ultra DMA mode 1 and below are supported F 0 1 = Ultra DMA mode 0 is supported F 15-8 Reserved 7-0 Time required for Normal Erase mode SECURITY ERASE UNIT command F 15-8 Reserved 7-0 Time required for Enhanced Erase mode SECURITY ERASE UNIT command 89 0001h 90 0001h 91 0000h V Current APM level value 92 FFFEh V Master Password Identifier 93 0000h X Hardware reset result 0000h F Current AAM value 15-8 Vendor's recommended AAM value V 7-0 94 95-99 0000h 100-103 XXXXh 104-105 0000h Current AAM value Reserved X Total Number of User Addressable Logical Sectors for 48-bit commands (QWord) Reserved Physical sector size / logical sector size 106 4000h F F Transcend Information Inc. 15 14 Shall be cleared to zero Shall be set to one 17 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 107-118 2.5" Solid State Disk F 13 F 12 1 = Device Logical Sector longer than 256 Words 11-4 Reserved F 3-0 0000h 4000h 2x logical sectors per physical sector Reserved F 119 1 = Device has multiple logical sectors per physical sector Commands and feature sets supported (Continued from words 84:82) 15 Shall be cleared to zero F 14 Shall be set to one 13-6 Reserved F F 5 4 1= The Free-fall Control feature set is supported 1 = The DOWNLOAD MICROCODE command with mode 3 is supported F F 3 2 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported 1 = The WRITE UNCORRECTABLE EXT command is supported F 1 0 1 = The Write-Read-Verify feature set is supported Reserved for DDT Commands and feature sets supported or enabled (Continued from words 87:85) 120 4000h 121-126 0000h 127 0000h 128 0021h 129-159 0000h 160-216 0000h 217 0001h 218-254 0000h F F 15 14 V 13-6 Reserved 5 1= The Free-fall Control feature set is enabled F F 4 3 1 = The DOWNLOAD MICROCODE command with mode 3 is supported 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported F V 2 1 1 = The WRITE UNCORRECTABLE EXT command is supported 1 = The Write-Read-Verify feature set is enabled 0 Reserved for DDT Shall be cleared to zero Shall be set to one Reserved for expended supported and enabled settings X Obsolete F Security status 15-9 Reserved V F 8 7-6 Security level 0 = High, 1 = Maximum Reserved F V 5 4 1 = Enhanced security erase supported 1 = Security count expired V V 3 2 1 = Security frozen 1 = Security locked V F 1 0 1 = Security enabled 1 = Security supported X Vendor specific Reserved F Nominal media rotation rate Reserved Integrity word 255 0000h X 15-8 Checksum 7-0 Signature Key: Transcend Information Inc. 18 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk F/V = Fixed/variable content F = the content of the word is fixed and does not change. For removable media devices, these values may change when media is removed or changed. V = the contents of the word is variable and may change depending on the state of the device or the commands executed by the device. X = the content of the word may be fixed or variable. IDLE (E3h) This command causes the device to set BSY, enter the Idle mode, clear BSY and generate an interrupt. If sector count is non-zero, the automatic power down mode is enabled. If the sector count is zero, the automatic power mode is disabled. IDLE IMMEDIATE (E1h) This command causes the device to set BSY, enter the Idle(Read) mode, clear BSY and generate an interrupt. INITIALIZE DEVICE PARAMETERS (91h) This command enables the host to set the number of sectors per track and the number of tracks per heads. READ BUFFER (E4h) The READ BUFFER command enables the host to read a 512-byte block of data. READ DMA (C8h) Read data from sectors during Ultra DMA and Multiword DMA transfer. Use the SET FEATURES command to specify the mode value. A sector count of zero requests 256 sectors. READ DMA EXT (25h) 48-bit feature set mandatory command. Read data from sectors during Ultra DMA and Multiword DMA transfer. Use the SET FEATURES command to specify the mode value. A sector count of zero requests 65536 sectors. READ FPDMA QUEUED (60h) NCQ feature set mandatory 48-bit command. This command requests that data to be transferred from the device to the host. Transcend Information Inc. 19 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk READ LOG EXT (2Fh) General purpose logging feature set mandatory 48-bit command. This command returns the specified log to the host. Log Address Log Name Feature Set R/W Access 00h Log directory N/A RO GPL 10h NCQ Command Error NCQ RO GPL READ MULTIPLE (C4h) This command performs similarly to the Read Sectors command. Interrupts are not generated on each sector, but on the transfer of a block which contains the number of sectors defined by a Set Multiple command. READ MULTIPLE EXT (29h) 48-bit feature set mandatory command. This command performs similarly to the Read Sectors command. Interrupts are not generated on each sector, but on the transfer of a block which contains the number of sectors defined by a Set Multiple command. READ SECTOR(S) (20h/21h) This command reads 1 to 256 sectors as specified in the Sector Count register from sectors which is set by Sector number register. A sector count of 0 requests 256 sectors. The transfer beings specified in the Sector Number register. READ SECTOR(S) EXT (24h) 48-bit feature set mandatory command. This command reads 1 to 65536 sectors as specified in the Sector Count register from sectors which is set by Sector number register. A sector count of zero requests 65536 sectors. The transfer beings specified in the Sector Number register. READ VERIFY SECTOR(S) (40h/41h) This command verifies one or more sectors on the drive by transferring data from the flash media to the data buffer in the drive and verifying that the ECC is correct. This command is identical to the Read Sectors command, except that DRQ is never set and no data is transferred to the host. READ VERIFY SECTOR(S) EXT (42h) 48-bit feature set mandatory command. This command verifies one or more sectors on the drive by transferring data from the flash media to the data buffer in the drive and verifying that the ECC is correct. This command is identical to the Read Sectors command, except that DRQ is never set and no data is transferred to the host. Transcend Information Inc. 20 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk RECALIBRATE (10h) The current drive performs no processing if it receives this command. It is supported for backward compatibility with previous devices. SECURITY DISABLE PASSWORD (F6h) Disables any previously set user password and cancels the lock. The host transfers 512 bytes of data, as shown in the following table, to the drive. The transferred data contains a user or master password, which the drive compares with the saved password. If they match, the drive cancels the lock. The master password is still saved. It is re-enabled by issuing the SECURITY SET PASSWORD command to re-set a user password. SECURITY ERASE PREPARE (F3h) This command shall be issued immediately before the Security Erase Unit command to enable erasing and unlocking. This command prevents accidental loss of data on the drive. SECURITY ERASE UNIT (F4h) The host uses this command to transfer 512 bytes of data, as shown in the following table, to the drive. The transferred data contains a user or master password, which the drive compares with the saved password. If they match, the drive deletes user data, disables the user password, and cancels the lock. The master password is still saved. It is re-enabled by issuing the SECURITY SET PASSWORD command to re-set a user password. SECURITY FREEZE LOCK (F5h) Causes the drive to enter Frozen mode. Once this command has been executed, the following commands to update a lock result in the Aborted Command error: * SECURITY SET PASSWORD * SECURITY UNLOCK * SECURITY DISABLE PASSWORD * SECURITY ERASE PREPARE * SECURITY ERASE UNIT The drive exits from Frozen mode upon a power-off or hard reset. If the SECURITY FREEZE LOCK command is issued when the drive is placed in Frozen mode, the drive executes the command, staying in Frozen mode. Transcend Information Inc. 21 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk SECURITY SET PASSWORD (F1h) This command set user password or master password. The host outputs sector data with PIO data-out protocol to indicate the information defined in the following table. Security set Password data content Word 0 Content Control word Bit 0 Identifier 0=set user password 1=set master password Bits 1-7 Reserved Bit 8 Security level 0=High 1=Maximum Bits 9-15 1-16 17-255 Reserved Password (32 bytes) Reserved SECURITY UNLOCK (F2h) This command disable LOCKED MODE of the device. This command transfers 512 bytes of data from the host with PIO data-out protocol. The following table defines the content of this information. Security Unlock information Word 0 Content Control word Bit 0 Identifier 0=compare user password 1=compare master password Bits 1-15 1-16 17-255 Reserved Password (32 bytes) Reserved SEEK (7xh) This command is effectively a NOP command to the device although it does perform a range check. Transcend Information Inc. 22 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk SET FEATURES (EFh) This command set parameter to Features register and set drive's operation. For transfer mode, parameter is set to Sector Count register. This command is used by the host to establish or select certain features. Features register Value and settable operating mode Value Function 02h Enable write cache 03h Set transfer mode based on value in Sector Count register. 55h Disable read look-ahead feature 82h Disable write cache AAh Enable read look-ahead feature SET MULTIPLE MODE (C6h) This command enables the device to perform READ MULTIPLE and WRITE MULTIPLE operations and establishes the block count for these commands. SLEEP (E6h) This command causes the device to set BSY, enter the Sleep mode, clear BSY and generate an interrupt. SMART Function Set (B0h) Performs different processing required for predicting device failures, according to the subcommand specified in the Features register. If the Features register contains an unsupported value, the Aborted Command error is returned. If the SMART function is disabled, any subcommand other than SMART ENABLE OPERATIONS results in the Aborted Command error. Code Smart Subcommand D0h READ DATA D1h READ ATTRIBUTE THRESHOLDS D2h ENABLE/DISABLE ATTRIBUTE AUTOSAVE D3h SAVE ATTRIBUTE VALUES D5h Reserved D6h Reserved D8h ENABLE OPERATIONS Transcend Information Inc. 23 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk D9h DISABLE OPERATIONS DAh RETURN STATUS SMART READ DATA This command returns 512-byte SMART Data Structure to the host with PIO data-in protocol. The register file has to contain D0h for Features register, 4Fh for LBA Mid register and C2h for the LBA High register. Byte Description 0-1 Data structure revision number 2-13 1st attribute data 14-361 2nd-30th Individual attribute data 362 Off-line data collection status 363 Reserved 364-365 Total time in seconds to complete off-line data collection 366 Reserved 367 Off-line data collection capability 368-369 SMART capability 370-385 Reserved 386-510 Reserved 511 Data structure Checksum Byte 2-361: Individual attribute data Byte Description 0 Attribute ID 1-2 Status Flag (0x0002) 3 Attribute Value (0x64) 4-11 Transcend Information Inc. Vendor Specific 24 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk The attribute ID information is listed in the following table ID Detail Information Description Byte E5h E8h E9h EAh Halt System ID, Flash ID Firmware version information ECC Fail Record Average Erase Count, Max Erase Count Transcend Information Inc. Description 0 Halt System ID 1 Flash ID (byte 1) 2 Flash ID (byte 2) 3 Flash ID (byte 3) 4 Flash ID (byte 4) 5 Flash ID (byte 5) 6 Flash ID (byte 6) 7 Flash ID (byte 7) 0 Year (High Byte, ASCII) 1 Year (Low Byte, ASCII) 2 Month (High Byte, ASCII) 3 Month (Low Byte, ASCII) 4 Day (High Byte, ASCII) 5 Day (Low Byte, ASCII) 6 Channels (binary) 7 Banks (binary) 0 ECC fail number 1 Row address 3 2 Row address 2 3 Row address 1 4 Channel number of last ECC fail 5 Bank number of last ECC fail 6 Reserved 7 Reserved 0 Average Erase Count (High Byte) 1 Average Erase Count 2 Average Erase Count (Low Byte) 3 Max Erase Count (High Byte) 4 Max Erase Count 25 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M EBh 2.5" Solid State Disk Good Block Count, System Block Count 5 Max Erase Count (Low Byte) 6 Reserved 7 Reserved 0 Good Block Count (High Byte) 1 Good Block Count 2 Good Block Count (Low Byte) 3 System(Free) Block Count (High 4 Byte) 5 System(Free) Block Count (Low 6 Byte) 7 Reserved Reserved Reserved ECh-FFh Reserved SMART READ ATTRIBUTE THRESHOLD This transfers 512 bytes of drive failure threshold data to the host. SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE Enables or disables the attribute value autosave function. This command specifies whether the current attribute values are automatically saved to the drive when it changes the mode. This setting is maintained when the power is turned on and off. SMART SAVE ATTRIBUTE VALUE Saves any modified attribute values. SMART EXECUTE OFF-LINE IMMEDIATE This command of Non-data input causes the controller to immediately initiate the set of activities that collect SMART data in a off-line mode and then save data to the Nand flash memory, or execute a selfdiagnostic test routine in either captive or off-line mode. Transcend Information Inc. 26 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk SMART ENABL OPERATIONS Enables the SMART function. This setting is maintained when the power is turned off and then back on. Once the SMART function is enabled, subsequent SMART ENABLE OPERATIONS commands do not affect any parameters. SMART DISABLE OPERATIONS Disables the SMART function. Upon receiving the command, the drive disables all SMART operations. This setting is maintained when the power is turned off and then back on. Once this command has been received, all SMART commands other than SMART ENABLE OPERATIONS are aborted with the Aborted Command error. This command disables all SMART capabilities including any and all timer and event count functions related exclusively to this feature. After command acceptance, this controller will disable all SMART operations. SMART data in no longer be monitored or saved. The state of SMART is preserved across power cycles. SMART RETURN STATUS Reports the drive reliability status. Values reported when a predicted defect has not been detected: Cylinder Low register: 4Fh Cylinder High register: C2h Values reported when a predicted defect has been detected: Cylinder Low register: F4h Cylinder High register: 2Ch SMART ENABLE/DISABLE AUTOMATIC OFF-LINE Enables (when Sector Count register = "F8h") or disables (Sector Count register = "00h") the automatic off-line data collection function. The automatic collection is disabled if a value of "00h" is set in the Sector Count register before a subcommand is issued. If automatic collection is disabled, the drive can still save attribute information during normal operation, such as during the power-on/off sequence or error correction sequence. The automatic collection function is enabled if a value of "F8h" is set in the Sector Count register before the command is issued. Values other than "00h" and "F8h" are vendor-specific. Transcend Information Inc. 27 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk STANDBY (E2h) This command causes the device to set BSY, enter the Sleep mode (which corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately. STANDBY IMMEDIATE (E0h) This command causes the drive to set BSY, enter the Sleep mode (which corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately. WRITE BUFFER (E8h) This command enables the host to write the contents of one 512-byte block of data to the device's buffer. WRITE DMA (CAh) Write data to sectors during Ultra DMA and Multiword DMA transfer. Use the SET FEATURES command to specify the mode value. WRITE DMA EXT (35h) 48-bit feature set mandatory command. Write data to sectors during Ultra DMA and Multiword DMA transfer. Use the SET FEATURES command to specify the mode value. WRITE DMA FUA EXT (3Dh) 48-bit feature set mandatory command. This command provides the same function as the WRITE DMA EXT command except that regardless of whether volatile and/or non-volatile write caching in the device is enabled or not, the user data shall be written to non-volatile media before command completion is reported. WRITE FPDMA QUEUED (61h) NCQ feature set mandatory 48-bit command. This command causes data to be transferred from the host to the device. WRITE MULTIPLE (C5h) This command is similar to the Write Sectors command. Interrupts are not presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set Multiple command. Transcend Information Inc. 28 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk WRITE MULTIPLE EXT (39h) 48-bit feature set mandatory command. This command is similar to the Write Sectors command. Interrupts are not presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set Multiple command. WRITE MULTIPLE FUA EXT (CEh) 48-bit feature set mandatory command. This command provides the same functionality as the WRITE MULTIPLE EXT command except that regardless of whether volatile and/or non-volatile write caching in the device is enabled or not, the user data shall be written to non-volatile media before command completion is reported. WRITE SECTOR(S) (30h/31h) Write data to a specified number of sectors (1 to 256, as specified with the Sector Count register) from the specified address. Specify "00h" to write 256 sectors. WRITE SECTOR(S) EXT (34h) 48-bit feature set mandatory command. Write data to a specified number of sectors (1 to 65536, as specified with the Sector Count register) from the specified address. Specify "00h" to write 65536 sectors. Transcend Information Inc. 29 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Ultra DMA data transfer Ultra DMA data burst timing requirements Name Mode 0 (in ns) Min t2CYCTYP tCYC t2CYC tDS tDH tDVS tDVH tCS tCH tCVS tCVH tZFS tDZFS tMLI tUI tZAD tENV tACK tSS Max (in ns) Min Max (in ns) Min Max Mode 5 Mode 6 Measurement (in ns) location (in ns) Min Max Min Max 90 60 40 30 Sender 112 73 54 39 25 16.8 13.0 Note 3 230 153 115 86 57 38 29 Sender 15.0 10.0 7.0 7.0 5.0 4.0 2.6 Recipient 5.0 5.0 5.0 5.0 5.0 4.6 3.5 Recipient 70.0 48.0 31.0 20.0 6.7 4.8 4.0 Sender 6.2 6.2 6.2 6.2 6.2 4.8 4.0 Sender 15.0 10.0 7.0 7.0 5.0 5.0 5.0 Device 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Device 70.0 48.0 31.0 20.0 6.7 10.0 10.0 Host 6.2 6.2 6.2 6.2 6.2 10.0 10.0 Host 0 0 0 0 0 35 25 Device 70.0 48.0 31.0 20.0 6.7 25 17.5 Sender 230 0 150 200 0 150 170 0 150 130 0 100 120 0 100 90 0 75 0 80 Device 60 Note 4 20 20 20 20 20 20 20 Host 0 0 0 0 0 0 0 Host 10 10 10 10 10 10 10 Note 5 20 20 20 20 20 20 20 Host 0 0 0 0 0 0 0 Device 20 70 20 75 160 tIORDYZ tZIORDY (in ns) Min Mode 4 120 tRFS tRP Max Mode 3 160 tAZ tZAH (in ns) Min Mode 2 240 tFS tLI Max Mode 1 70 20 70 125 20 70 20 60 100 20 55 20 60 100 20 55 20 60 100 20 50 20 50 85 20 50 Host 50 Sender 85 20 Recipient 20 Device 0 0 0 0 0 0 0 Device 20 20 20 20 20 20 20 Host 50 50 50 50 50 50 50 Sender Transcend Information Inc. 30 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Ultra DMA data burst timing descriptions Name Comment t2CYCTYP Typical sustained average two cycle time tCYC Cycle time allowing for asymmetry and clock variations (from STROBE edge to STROBE edge) t2CYC Two cycle time allowing for clock variations (from rising edge to next rising edge or from falling edge to next falling edge of STROBE) tDS Data setup time at recipient (from data valid until STROBE edge) tDH Data hold time at recipient (from STROBE edge until data may become invalid) tDVS Data valid setup time at sender (from data valid until STROBE edge) tDVH Data valid hold time at sender (from STROBE edge until data may become invalid) tCS CRC word setup time at device tCH CRC word hold time device tCVS CRC word valid setup time at host (from CRC valid until DMACK- negation) tCVH CRC word valid hold time at sender (from DMACK- negation until CRC may become invalid) tZFS Time from STROBE output released-to-driving until the first transition of critical timing. tDZFS Time from data output released-to-driving until the first transition of critical timing. tFS First STROBE time (for device to first negate DSTROBE from STOP during a data in burst) tLI Limited interlock time tMLI Interlock time with minimum tUI Unlimited interlock time tAZ Maximum time allowed for output drivers to release (from asserted or negated) tZAH Minimum delay time required for output tZAD drivers to assert or negate (from released) tENV Envelope time (from DMACK- to STOP and HDMARDY- during data in burst initiation and from DMACK to STOP during data out burst initiation) tRFS Ready-to-final-STROBE time (no STROBE edges shall be sent this long after negation of DMARDY-) tRP Ready-to-pause time (that recipient shall wait to pause after negating DMARDY-) tIORDYZ Maximum time before releasing IORDY tZIORDY Minimum time before driving IORDY tACK Setup and hold times for DMACK- (before assertion or negation) tSS Time from STROBE edge to negation of DMARQ or assertion of STOP (when sender terminates a burst) Transcend Information Inc. 31 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Initiating an Ultra DMA data-in burst Transcend Information Inc. 32 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Sustained Ultra DMA data-in burst Host pausing an Ultra DMA data-in burst Transcend Information Inc. 33 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Device terminating an Ultra DMA data-in burst Transcend Information Inc. 34 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Host terminating an Ultra DMA data-in burst Transcend Information Inc. 35 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Initiating an Ultra DMA data-out burst Transcend Information Inc. 36 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Sustained Ultra DMA data-out burst Device pausing an Ultra DMA data-out burst Transcend Information Inc. 37 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Host terminating an Ultra DMA data-out burst Transcend Information Inc. 38 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Device terminating an Ultra DMA data-out burst Transcend Information Inc. 39 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk PIO data transfer PIO timing requirements PIO timing parameters Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 ns ns ns ns ns t0 Cycle time (min) 600 383 240 180 120 t1 Address valid to DIOR-/DIOW- setup (min) 70 50 30 30 25 t2 DIOR-/DIOW- (min) 165 125 100 80 70 t2i DIOR-/DIOW- recovery time (min) - - - 70 25 t3 DIOW- data setup (min) 60 45 30 30 20 t4 DIOW- data hold (min) 30 20 15 10 10 t5 DIOR- data setup (min) 50 35 20 20 20 t6 DIOR- data hold (min) 5 5 5 5 5 t6Z DIOR- data tristate (max) 30 30 30 30 30 t9 DIOR-/DIOW- to address valid hold (min) 20 15 10 10 10 (min) 0 0 0 0 0 35 35 35 35 35 Read Data Valid to IORDY active tRD (if IORDY initially low after tA) tA IORDY Setup time tB IORDY Pulse Width (max) 1250 1250 1250 1250 1250 tC IORDY assertion to release (max) 5 5 5 5 5 Transcend Information Inc. 40 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk PIO data transfer to/from device Transcend Information Inc. 41 V1.2 TTS S88G GS SS SD D2255--S S TTS S1166G GS SS SD D2255--S S TTS S//M M S3322G GS SS SD D2255--S TTS S6644G GS SS SD D2255--S S//M M TTS S112288G GS SS SD D2255--M M 2.5" Solid State Disk Ordering Information The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. USA Los Angeles: E-mail: sales@transcendusa.com Maryland: E-mail: sales_md@transcendusa.com www.transcendusa.com CHINA E-mail: sales@transcendchina.com www.transcendchina.com TAIWAN No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales@transcend.com.tw www.transcend.com.tw GERMANY E-mail: vertrieb@transcend.de www.transcend.de HONG KONG E-mail: sales@transcend.com.hk www.transcendchina.com JAPAN E-mail: sales@transcend.co.jp www.transcend.jp THE NETHERLANDS E-mail: sales@transcend.nl www.transcend.nl United Kingdom E-mail: sales@transcend-uk.com www.transcend-uk.com KOREA E-mail: sales@transcend.co.kr www.transcend.co.kr Transcend Information Inc. 42 V1.2