EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW filter
W-CDMA
Series/type:
Ordering code: B7750
B39212B7750C810
Date:
Version: September 11, 2008
2.0
2September 11, 2008
B7750
2140.00 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW filter
Data sheet
Application
■RF filter for mobile telephone
UMTS systems, receive path
■Low insertion loss, low amplitude ripple
■Usable passband 60 MHz
Features
■Package size 2.5 x2.0 x 0.8 mm3
■Package code DCS4D
■RoHS compatible
■Approximate weight 0.012 g
■Package for Surface Mount Technology (SMT)
■Ni, gold-plated terminals
■Electrostatic Sensitive Device (ESD)
0,7
0,1
0,6
2,5
2,0 0,8
12
43
0,1
bottom view
side view
top view
Pin configuration
■1 Input
■3 Output
■2,4 Ground
3September 11, 2008
B7750
2140.00 MHz
SAW Components
SAW filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Characteristics
Temperature range for specification: T = -20 to +85 ˚C
Terminating source impedance: ZS=50Ω
Terminating load impedance: ZL=50Ω
min. typ.
@ 25 ˚C max.
Center frequency fC— 2140.0 — MHz
Maximum insertion attenuation αmax
2110.0 ... 2170.0 MHz — 2.6 2.8 dB
Amplitude ripple (p-p) ∆α
2110.0 ... 2170.0 MHz — 0.8 1.0 dB
Input VSWR 2110.0 ... 2170.0 MHz — 2.2 2.4
Output VSWR2110.0 ... 2170.0 MHz — 2.2 2.4
Absolute Attenuation α
0.0 ... 1500.0 MHz 40 42 — dB
1500.0 ... 1880.0 MHz 35 40 — dB
1920.0 ... 1980.0 MHz 34 36 — dB
2025.0 ... 2050.0 MHz 20 25 — dB
2205.0 ... 2265.0 MHz 10 20 — dB
2230.0 ... 2260.0 MHz 22 24 — dB
2300.0 ... 2360.0 MHz 33 38 — dB
2490.0 ... 2550.0 MHz 37 43 — dB
2870.0 ... 2930.0 MHz 31 35 — dB
4000.0 ... 6000.0 MHz 20 31 — dB
4September 11, 2008
B7750
2140.00 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW filter
Data sheet
Maximum ratings
Operable temperature range T –20/+85 ˚C
Storage temperature range Tstg –40/+85 ˚C
DC voltage VDC 3 V
ESD voltage VESD 501)
1) acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Vmachine model, 1 pulse
Input power max PIN 13 dBm source and load impedance 50Ω
5September 11, 2008
B7750
2140.00 MHz
SAW Components
SAW filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Transfer function
Transfer function (wideband)
6September 11, 2008
B7750
2140.00 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW filter
Data sheet
Smith charts
S11 function
S22 function
7September 11, 2008
B7750
2140.00 MHz
SAW Components
SAW filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
References
Type B7750
Ordering code B39212B7750C810
Marking and package C61157-A7-A118
Packaging F61074-V8153-Z000
Date codes L_1126
S-parameters B7750_NB.s3p
B7750_WB.s3p
see file header for port/pin assignment table
Soldering profile S_6001
RoHS compatible defined as compatible with the following documents:
"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
w
ww.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2008. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
t
he international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
t
he type in question please also contact one of our Sales Offices.
8September 11, 2008
Important notes
T
he following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be avail-
able. The aforementioned does not apply in the case of individual agreements deviating from
the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIM-
DAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks reg-
istered or pending in Europe and in other countries. Further information will be found on the
Internet at www.epcos.com/trademarks.
