Freescale Semiconductor, Inc. Table 1: Monitor Debugger (mpc8bug) Freescale Semiconductor, Inc... MPC860 Rev 0.x 0.2 = Mask 2E64C 0.3 = Mask 3E64C mpc8bug - Any Version Rev A.x A.2 = Mask 2F84C mpc8bug V1.2 or later Flash in MPC860 ADS Board & Part # ADS board & Monitor Debugger (mpc8bug) 2 MB - 55132T9DX (*Southland Microsystems) Pilot, ENG, & Rev A boards, Any Version mpc8bug 4 MB - 50132T9DX (*Southland Microsystems) 4 MB - SM73218XV1JAVS2 (Smart) Rev A boards or later, mpc8bug V1.2 or later 8 MB - 50232T2DX (*Southland Microsystems) Rev A boards or later, mpc8bug V1.2 or later Flash in MPC860 ADS Board & Part # SDS Debugger 2 MB - 55132T9DX (*Southland Microsystems) V0.7 Working 4 MB - 50132T9DX (*Southland Microsystems) 4 MB - SM73218XV1JAVS2 (Smart) Not Supported as of March 1997 8 MB - 50232T2DX Not Supported as of March 1997 MPC860 ADS Board REV B or later ** Memory Limitations All O.K. 4MB DRAM Part # - 30136G6 (*Southland Microsystems) ENG, PILOT, Rev A ENG, PILOT, Rev A June 25, 1996) No Burst to EDO (Shipped before Require additon of damp ing resistors *To order through Southland Microsystems contact: Steve Marconi (714)3801958 x270 For More Information On This Product, Go to: www.freescale.com Page 1 of 2 Freescale Semiconductor, Inc. Table 1: Freescale Semiconductor, Inc... ** All boards (used with mpc8bug monitor debugger) default to memory initialization for 50MHz Fast Page Mode DRAM (non-EDO), only SPEED (60ns, 70ns) is automatically sensed. EDO/NonEDO is NOT! ** On the MPC860ADS if EDO is initialized as Non-EDO (as above) it will run all modes (Bursting OK). It will just be treated like normal DRAM. ** Any MPC860 chip will work with any MPC860 ADS board Page 2 of 2 Rev. 1 1/15/98 Changed Southland Microsystems contact. For More Information On This Product, Go to: www.freescale.com