Page 1 of 2
Table 1:
MPC860 Monitor Debugger (mpc8bug)
Rev 0.x 0.2 = Mask 2E64C
0.3 = Mask 3E64C mpc8bug - Any Version
Rev A.x A.2 = Mask 2F84C mpc8bug V1.2 or later
Flash in MPC860 ADS Board & Part # ADS board & Monitor Debugger (mpc8bug)
2 MB - 55132T9DX (
*
Southland Microsystems) Pilot, ENG, & Rev A boards, Any Version mpc8bug
4 MB - 50132T9DX
(*
Southland Microsystems)
4 MB - SM73218XV1JAVS2 (Smart) Rev A boards or later, mpc8bug V1.2 or later
8 MB - 50232T2DX (
*
Southland Microsystems) Rev A boards or later, mpc8bug V1.2 or later
Flash in MPC860 ADS Board & Part # SDS Debugger
2 MB - 55132T9DX (
*
Southland Microsystems)
V0.7 Working
4 MB - 50132T9DX (
*
Southland Microsystems)
4 MB - SM73218XV1JAVS2 (Smart)
Not Supported as of March 1997
8 MB - 50232T2DX
Not Supported as of March 1997
MPC860 ADS Board ** Memory Limitations
REV B or later All O.K.
4MB DRAM Part # - 30136G6 (
*
Southland Microsystems)
ENG, PILOT, Rev A No Burst to EDO
ENG, PILOT, Rev A (Shipped before
June 25, 1996) Require additon of damp
ing resistors
*
To order through Southland Microsys-
tems contact: Steve Marconi (714)380-
1958 x270
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
Page 2 of 2 Rev. 1 1/15/98 Changed Southland Microsystems contact.
**
All boards (used with mpc8bug moni-
tor debugger) default to memory initial-
ization for 50MHz Fast Page Mode
DRAM (non-EDO), only SPEED (60ns,
70ns) is automatically sensed. EDO/Non-
EDO is NOT!
**
On the MPC860ADS if EDO is initial-
ized as Non-EDO (as abov e) it will run all
modes (Bursting OK). It will just be
treated like normal DRAM.
**
Any MPC860 chip will work with any
MPC860 ADS board
Table 1:
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
