Q SERIES O19mm (.748") Panel Mount LED Indicators Distinctive features and specification Q19_VOY1603R1US Features * 19mm panel mounting LED indicator * 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * * * * Prominent, extra prominent, recessed and flush bezel styles Custom engraving available 2VDC - 220VAC (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) * Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 75cNm O 19.00 +0.15/-0.0 PANEL CUTOUT 22,00 0,866 AF 3,00 0,118 M19 x 1,0 THREAD Flush Standard LED Intensity Prominent and Recessed Forward Voltage HE Red 80mcd 2.0V 10mcd Green 60mcd 2.2V 5mcd 4mcd Yellow 50mcd 2.1V 100mcd Blue 540mcd 3.3V 150mcd White 1000mcd 3.3V Orange 80mcd 2.0V 200mcd Bi-color (Typical) (Red/Green) 15/15mcd 2.0V/2.2V 14/10mcd Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 2.0V/2.2V/2.1V 15/10/30mcd Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright LED HE Red Green Yellow Blue White Orange Prominent and Recessed 17,000mcd 11,000mcd 4,000mcd 2,500mcd 4,400mcd 2,800mcd Flush 2000mcd 680mcd 350mcd 250mcd 250mcd 300mcd Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.1V Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 2,800mcd 2,200mcd 1,300mcd 850mcd Flush 800mcd 250mcd 250mcd 200mcd Forward Voltage 2.1V 3.2V 2.0V 2.1V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. APEM www.apem.com 1 Q SERIES O19mm (.748") Panel Mount LED Indicators Technical Drawings PROMINENT BEZEL SOLDER LUG/FASTONS PINS 0,50 ,020 1,25 0,001 1,25 0,049 M19x1,0 4,75 0,187 13,50 0,531 4,75 0,187 13,50 0,531 10,00 0,394 9,35 0,368 33,75 1,329 7,00 0,276 5,50 0,217 28,75 1,132 WIRES M19x1,0 REAR EPOXY PINS 0,50 0,020 1,25 0,049 1,25 0,049 22,00 0,866 22,00 0,866 2,8x0,8[0,11x0,031] 22,00 0,866 22,00 ,866 M19x1,0 4,75 0,187 13,50 0,531 200,0+/-10 [7,874+/-0,393] FLUSH BEZEL 16,00 0,630 14,50 0,571 4,75 0,187 13,50 0,531 19,75 0,778 SOLDER LUG/FASTONS M19x1,0 200,0+/-10 [7,874+/-0,393] PINS 1,85 0,073 0,50 ,020 1,25 0,049 1,25 0,049 4,75 0,187 13,50 0,531 19,75 0,778 1,85 0,073 13,50 0,531 10,00 0,394 9,35 0,368 33,75 1,329 WIRES M19x1,0 7,00 0,276 5,50 0,217 13,50 0,531 28,75 1,132 REAR EPOXY PINS 22,00 0,866 22,00 ,866 M19x1,0 1,25 0,049 22,00 0,866 22,00 0,866 2,8x0,8[0,11x0,031] 0,50 0,020 1,25 0,049 200,0+/-10 [7,874+/-0,393] SHORT BODY WIRES M19x1,0 22,00 0,866 22,00 0,866 22,00 0,866 M19x1,0 4,75 0,187 13,50 0,531 17,50 0,689 16,75 0,659 SHORT BODY PINS M19x1,0 0,50 0,020 1,25 0,049 1,25 0,049 REAR EPOXY WIRES 18,25 0,719 4,75 0,187 13,50 0,531 17,50 0,689 28,75 1,132 1,85 0,073 13,50 0,531 200,0+/-10 [7,874+/-0,393] 28,75 1,132 SHORT BODY PINS 2 200,0+/-10 [7,874+/-0,393] 18,25 0,719 16,75 0,659 SHORT BODY WIRES M19x1,0 22,00 0,866 0,50 0,020 1,85 0,073 13,50 0,531 17,50 0,689 M19x1,0 22,00 0,866 22,00 0,866 M19x1,0 1,25 0,049 1,25 0,049 REAR EPOXY WIRES 1,85 0,073 13,50 0,531 17,50 0,689 1,85 0,073 13,50 0,531 19,75 0,778 14,50 0,571 16,00 0,630 www.apem.com 1,85 0,073 13,50 0,531 19,75 0,778 200,0+/-10 [7,874+/-0,393] APEM Q SERIES O19mm (.748") Panel Mount LED Indicators Technical Drawings RECESSED BEZEL M19x1,0 2,8X0,8 TAB [0.110x0.031] 200,00+/-10 [7.874+/-0.393] 0,50 0,020 16,00 0,630 14,50 0,571 SQ SHORT BODY WIRES M19x1,0 THREAD PINS 0,90 0,035 2,8x0,8[0,11x0,031] 22,00 0,866 10,00 0,394 9,35 0,368 32,75 1,289 5,75 0,226 13,50 0,531 WIRES 22,00 0,866 22,00 ,866 SHORT BODY WIRES M19x1,0 0,90 0,035 22,00 0,866 M19x1,0 18,25 0,719 16,75 0,659 5,75 0,226 13,50 0,531 16,50 0,650 SHORT BODY PINS 0,90 0,035 22,00 0,866 22,00 0,866 200,0+/-10 [7,874+/-0,393] 27,75 1,093 0,50 0,020 1,25 0,049 1,25 0,049 REAR EPOXY WIRES M19x1,0 REAR EPOXY PINS M19x1,0 5,75 0,226 13,50 0,531 APEM 7,00 0,276 5,50 0,217 27,75 1,093 0,90 0,035 M19x1,0 200,0+/-10 [7,874+/-0,393] 200,00+/-10 [7.874+/-0.393] 5,00 0,197 13,50 0,531 19,75 0,778 22,00 0,866 M19x1,0 0,90 0,035 5,75 0,226 13,50 0,531 16,50 0,650 18,25 0,719 16,75 0,659 SOLDER LUG/FASTONS 0,90 0,035 5,75 0,226 13,50 0,531 0,90 0,035 0,50 0,020 2,50 0,098 1,25 0,049 M19x1,0 THREAD 0,50 ,020 1,25 0,001 1,25 0,049 EXTRA PROMINENT BEZEL 2,50 0,098 1,25 0,049 22,00 0,866 18,30 0,720 SHORT BODY PINS 5,00 0,197 13,50 0,531 19,75 0,778 REAR EPOXY PINS 0,50 0,020 200,00+/-10 [7.874+/-0.393] 5,00 0,197 13,50 0,531 17,50 0,689 7,00 0,276 5,50 0,217 28,75 1,132 5,00 0,197 13,50 0,531 17,50 0,689 28,75 1,132 M19x1,0 THREAD 5,00 0,197 13,50 0,531 22,00 0,866 22,00 0,866 WIRES M19x1,0 THREAD 5,00 0,197 13,50 0,531 REAR EPOXY WIRES 10,00 0,394 9,35 0,368 33,75 1,329 18,30 ,720 5,00 0,197 13,50 0,531 M19x1,0 THREAD PINS 22,00 0,866 22,00 0,866 M19x1,0 0,50 0,020 SQ 2,50 0,098 1,25 0,049 SOLDER LUG/FASTONS 5,75 0,226 13,50 0,531 18,75 0,738 16,00 0,630 14,50 0,571 www.apem.com 5,75 0,226 13,50 0,531 18,75 0,738 200,0+/-10 [7,874+/-0,393] 3 Q SERIES O19mm (.748") Panel Mount LED Indicators Custom options Cable length & connector CUSTOM MARKING For custom cable length and connectors please contact APEM CUSTOM ENGRAVING Suffix the part number with legend code Code Symbol Description Code Symbol Description Code Symbol Description -0AJ High Beam -041 Horn -0EL Engine Coil -097 Low Beam -013 Hazard Warning -0SB Seat Belt -027 Rear Fog -018 Heating -0UB USB Connection -026 Front Fog -0BU Brake Test -0ST Steam -021 Windscreen Wiper -0K6 Arrow -0EU -022 Windscreen Washer -0AG Battery -0AD Side Step -023 Ventilator Fan -0GP Oil Can -012 Air Con -0AH Turn Signal -020 Windscreen Heating -040 Engine -098 Side Lights -086 ABS -0BR Boot/Trunk Release ABS ECU ECU Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied. 4 www.apem.com APEM Q SERIES O19mm (.748") Panel Mount LED Indicators Overview STANDARD OPTIONS The Q19 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 19 P 1 B XX G 12 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING P = Prominent 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome R = Recess 2 = Pins B = Black Chrome F = Flush 3 = Wires G = Satin Grey EP = Extra Prominent 4 = Rear epoxy Pins Q 19 = O19mm Metal Metal XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed KK = Flashing Light (12 - 28VDC) G = Green 06 = 6VDC E = IP67 Y = Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC O = Orange 24A = 24VAC/DC YY = Bi-color ZZ = Tri-color 5 = Rear epoxy Wires 28 = 28VDC 6 = Short body Pins 7 = Short body Wires HR = Hyper Bright Red 28A = 28VAC/DC HG = Hyper Bright Green 110 = 110VAC HY = Hyper Bright Yellow 220 = 220VAC HO = Hyper Bright Orange SR = Super Bright Red Example Q19P1BXXR12E O19mm, prominent bezel, solder lug terminals, black chrome finish, fixed light, red, 12VDC LED, IP67 panel sealed SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White RG = Red/Green RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternate voltages consult APEM * Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28VDC * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Short body pins and wires are only available up to 28VDC * The Tri-color LED has red and green LEDs when both are connected yellow is produced * Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) * Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-color pins are center (-) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * Maximum panel thickness 11mm * We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC * For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage on page 1 APEM www.apem.com 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q19P1BXXB110E Q19P1BXXB12E Q19P1BXXB24E Q19P1BXXG110E Q19P1BXXG12E Q19P1BXXG24E Q19P1BXXR110E Q19P1BXXR12E Q19P1BXXR24E Q19P1BXXW110E Q19P1BXXW12E Q19P1BXXW24E Q19P1BXXY110E Q19P1BXXY12E Q19P1BXXY24E Q19P1BZZRYG12E Q19P1BZZRYG24E Q19P1CXXB110E Q19P1CXXB12E Q19P1CXXB24E Q19P1CXXG110E Q19P1CXXG12E Q19P1CXXG24E Q19P1CXXR110E Q19P1CXXR12E Q19P1CXXR24E Q19P1CXXW110E Q19P1CXXW12E Q19P1CXXW24E Q19P1CXXY110E Q19P1CXXY12E Q19P1CXXY24E Q19P1CZZRYG12E Q19P1CZZRYG24E Q19P1CXXW220E Q19P3BXXY28E Q19P1GXXSR02E Q19P1GXXSR24E Q19P3BXXHR12E Q19P7BZZRYG02