1
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Distinctive features and specification
Features
19mm panel mounting LED indicator
10mm colored diffused epoxy lens or 10mm water clear super bright LEDs
Prominent, extra prominent, recessed and flush bezel styles
2VDC – 220VAC
(2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
Supplied with fixing nut and spring washer
NB: UL Recognized Component
Standard LED Intensity Prominent and Recessed Forward Voltage
HE Red 80mcd 2.0V
Green 60mcd 2.2V
Yellow 50mcd 2.1V
Blue 540mcd 3.3V
White 1000mcd 3.3V
Orange 80mcd 2.0V
Bi-color (Typical) (Red/Green) 15/15mcd 2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED Prominent and Recessed Forward Voltage
HE Red 17,000mcd 2.2V
Green 11,000mcd 3.5V
Yellow 4,000mcd 2.3V
Blue 2,500mcd 3.3V
White 4,400mcd 3.3V
Orange 2,800mcd 2.1V
Hyper Bright LED Prominent and Recessed Forward Voltage
HE Red 2,800mcd 2.1V
Green 2,200mcd 3.2V
Yellow 1,300mcd 2.0V
Orange
850mcd
2.1V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Temperature Range: –40 to +85°C
TECHNICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 3.3VDC 20mA max*
6VDC 5.4 to 6.6VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
110VAC 99 to 121VAC 6mA
220VAC 207 to 253VAC 3mA
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
Torque: 75cNm
Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
Custom engraving available
Flush
10mcd
5mcd
4mcd
100mcd
150mcd
200mcd
14/10mcd
15/10/30mcd
Flush
2000mcd
680mcd
350mcd
250mcd
250mcd
300mcd
Flush
800mcd
250mcd
250mcd
200mcd
Ø 19.00 +0.15/-0.0
PANEL CUTOUT
www.apem.comAPEM
Q19_VOY1603R1US
(operating & storage)
22,00 0,866 AF 3,00 0,118
M19 x 1,0 THREAD
2www.apem.com
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Technical Drawings
PROMINENT BEZEL
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
FLUSH BEZEL
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
APEM
22,00
0,866
M19x1,0
2,8x0,8[0,11x0,031]
4,75 0,187
33,75 1,329
9,35 0,368
10,00 0,394
13,50 0,531
22,00
0,866
4,75 0,187
13,50 0,531
28,75 1,132
1,25 0,001
1,25 0,049
5,50 0,217
7,00 0,276
0,50 ,020
4,75 0,187
28,75 1,132
22,00
,866
13,50 0,531
200,0+/-10
[7,874+/-0,393]
M19x1,0
22,00
0,866
4,75 0,187
13,50 0,531
17,50 0,689
16,75 0,659
18,25 0,719
0,50 0,020
1,25 0,049
1,25 0,049
M19x1,0
22,00
0,866
4,75 0,187
13,50 0,531
17,50 0,689
M19x1,0
200,0+/-10
[7,874+/-0,393] 4,75 0,187
19,75 0,778
14,50 0,571
16,00 0,630
1,25 0,049
1,25 0,049
22,00
0,866
13,50 0,531
M19x1,0
0,50 0,020
4,75 0,187
19,75 0,778
22,00
0,866
13,50 0,531
M19x1,0
200,0+/-10
[7,874+/-0,393]
22,00
0,866
M19x1,0
2,8x0,8[0,11x0,031]
33,75 1,329
9,35 0,368
10,00 0,394
13,50 0,531
1,85 0,073
22,00
0,866
13,50 0,531
28,75 1,132
1,25 0,049
7,00 0,276
5,50 0,217
0,50 ,020
1,85 0,073
1,25 0,049
28,75 1,132
22,00
,866
13,50 0,531
200,0+/-10
[7,874+/-0,393]
M19x1,0
1,85 0,073
22,00
0,866
13,50 0,531
17,50 0,689
16,75 0,659
18,25 0,719
0,50 0,020
1,25 0,049
1,25 0,049
M19x1,0
1,85 0,073
22,00
0,866
13,50 0,531
17,50 0,689
M19x1,0
200,0+/-10
[7,874+/-0,393]
1,85 0,073
19,75 0,778
16,00 0,630
14,50 0,571
1,25 0,049
1,25 0,049
22,00
0,866
13,50 0,531
M19x1,0
0,50 0,020
1,85 0,073
19,75 0,778
22,00
0,866
13,50 0,531
M19x1,0
200,0+/-10
[7,874+/-0,393]
1,85 0,073
3
www.apem.com
Q SERIES
Ø19mm (.748") Panel Mount LED Indicators
Technical Drawings
RECESSED BEZEL
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
EXTRA PROMINENT BEZEL
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
APEM
22,00
0,866
M19x1,0
2,8x0,8[0,11x0,031]
5,75 0,226
32,75 1,289
9,35 0,368
10,00 0,394
13,50 0,531
0,90 0,035
22,00
0,866
5,75 0,226
13,50 0,531
27,75 1,093
1,25 0,001
1,25 0,049
5,50 0,217
7,00 0,276
0,50 ,020
0,90 0,035
5,75 0,226
27,75 1,093
22,00
,866
13,50 0,531
200,0+/-10
[7,874+/-0,393]
M19x1,0
0,90 0,035
22,00
0,866
5,75 0,226
13,50 0,531
16,50 0,650
16,75 0,659
18,25 0,719
0,50 0,020
M19x1,0
0,90 0,035
22,00
0,866
5,75 0,226
13,50 0,531
16,50 0,650
M19x1,0
200,0+/-10
[7,874+/-0,393]
0,90 0,035
5,75 0,226
18,75 0,738
14,50 0,571
16,00 0,630
1,25 0,049
1,25 0,049
22,00
0,866
13,50 0,531
M19x1,0
0,50 0,020
0,90 0,035
5,75 0,226
18,75 0,738
22,00
0,866
13,50 0,531
M19x1,0
200,0+/-10
[7,874+/-0,393]
0,90 0,035
M19x1,0
22,00
0,866
5,00 0,197
13,50 0,531
33,75 1,329
9,35 0,368
10,00 0,394
2,8X0,8 TAB
[0.110x0.031]
M19x1,0
22,00
0,866
5,00 0,197
13,50 0,531
28,75 1,132
5,50 0,217
7,00 0,276
0,50 0,020 SQ
2,50 0,098
1,25 0,049
22,00 0,866
5,00 0,197
13,50 0,531
28,75 1,132
200,00+/-10
[7.874+/-0.393]
M19x1,0 THREAD
M19x1,0 THREAD
0,50 0,020 SQ
2,50 0,098
1,25 0,049
16,75 0,659
18,25 0,7195,00 0,197
13,50 0,531
17,50 0,689
18,30 ,720
18,30 0,720
5,00 0,197
13,50 0,531
17,50 0,689
200,00+/-10
[7.874+/-0.393]
M19x1,0 THREAD
M19x1,0 THREAD
22,00 0,866
5,00 0,197
13,50 0,531
19,75 0,778
200,00+/-10
[7.874+/-0.393]
22,00 0,866
5,00 0,197
13,50 0,531
19,75 0,778
0,50 0,020
2,50 0,098
1,25 0,049
14,50 0,571
16,00 0,630
M19x1,0 THREAD
4www.apem.com
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Custom options
CUSTOM MARKING
Code Symbol Description
Code Symbol Description Code Symbol Description
-0AJ High Beam
-097 Low Beam
-027 Rear Fog
-026 Front Fog
-021 Windscreen
Wiper
-022 Windscreen
Washer
-023 Ventilator
Fan
-0AH Turn
Signal
-098 Side Lights
-041 Horn
-013 Hazard
Warning
-018 Heating
-0BU Brake Test
-0K6 Arrow
-0AG Battery
-0GP Oil Can
-020 Windscreen
Heating
-086 ABS
-0EL Engine
Coil
-0SB Seat Belt
-0UB USB
Connection
-0ST Steam
-0EU ECU
-0AD Side Step
-012 Air Con
-040 Engine
-0BR Boot/Trunk
Release
Suffix the part number with legend code
ABS
APEM
ECU
Cable length & connector
For custom cable length and
connectors please contact
APEM
Some common codes are listed above, for your custom requirements please contact APEM.
Unless specified standard engraving with white infill will be supplied.
CUSTOM ENGRAVING
5
www.apem.com
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Overview
STANDARD OPTIONS
Q 19 P 1 B XX G 12 E
Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
For LEDs with alternate voltages consult APEM
Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced Bi-colors are available up to 28VDC
Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
Short body pins and wires are only available up to 28VDC
The Tri-color LED has red and green LEDs when both are connected yellow is produced
Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
Maximum panel thickness 11mm
We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC
For multi-voltage options please consult APEM
Q
Example Q19P1BXXR12E
Ø19mm, prominent bezel, solder lug
terminals, black chrome finish, fixed light,
red, 12VDC LED, IP67 panel sealed
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
Metal
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
02 = no resistor*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(12 - 28VDC)
YY = Bi-color
ZZ = Tri-color
SERIES MOUNTING
HOLE
19 = Ø19mm Metal
P = Prominent
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOR VOLTAGE SEALING
The Q19 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
* = For resistorless versions (02) please refer to the forward voltage on page 1
F = Flush
R = Recess
EP = Extra
Prominent
APEM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
Q19P1BXXB110E Q19P1BXXB12E Q19P1BXXB24E Q19P1BXXG110E Q19P1BXXG12E Q19P1BXXG24E
Q19P1BXXR110E Q19P1BXXR12E Q19P1BXXR24E Q19P1BXXW110E Q19P1BXXW12E Q19P1BXXW24E
Q19P1BXXY110E Q19P1BXXY12E Q19P1BXXY24E Q19P1BZZRYG12E Q19P1BZZRYG24E Q19P1CXXB110E
Q19P1CXXB12E Q19P1CXXB24E Q19P1CXXG110E Q19P1CXXG12E Q19P1CXXG24E Q19P1CXXR110E
Q19P1CXXR12E Q19P1CXXR24E Q19P1CXXW110E Q19P1CXXW12E Q19P1CXXW24E Q19P1CXXY110E
Q19P1CXXY12E Q19P1CXXY24E Q19P1CZZRYG12E Q19P1CZZRYG24E Q19P1CXXW220E Q19P3BXXY28E
Q19P1GXXSR02E Q19P1GXXSR24E Q19P3BXXHR12E Q19P7BZZRYG02