MEMS Oscillators: 4M Series Integrated Device Technology POWER MANAGEMENT | | ANALOG & RF The Analog and Digital CompanyTM INTERFACE & CONNECTIVITY | | TIMING & SYNCHRONIZATION MEMORY & LOGIC | DATA CONVERSION 5032 Packa ges ! < 1 ps Phase Jitter! * * * * Low Jitter Low Cost Fast Lead Times Standard Packages BENEFITS / FEATURES LVDS LVPECL * Short lead times - Enables Just-In-Time inventory management 5032 7050 Package Size 5.0 x 3.2 mm 7.0 x 5.0 mm Supply Voltage 2.5 or 3.3 V 2.5 or 3.3 V Frequency Range 50 MHz ~ 625 MHz 50 MHz ~ 625 MHz Frequency Stability 50 ppm 50 ppm Temperature Range -40 to +85C -40 to +85C * Standard differential outputs - LVDS, LVPECL * Standard package sizes * Low Phase Jitter - < 1.0 ps rms (12 kHz to 20 MHz ) * 50 ppm Frequency Stability * Shock and vibration resistant * Up to 40x higher reliability than Quartz www.idt.com/go/MEMS IDT | THE ANALOG + DIGITAL COMPANY Standard Frequencies (MHz) 100 106.25 125 133.33 148.5 150 155.52 156.25 159.375 160 161.133 187.5 200 212.5 250 312.5 ADDITIONAL CUSTOM FREQUENCIES AVAILABLE UPON REQUEST 4M SERIES MEMS PRODUCT BRIEF 1 MEMS Oscillators: 4M Series Integrated Device|Technology ANALOG & RF POWER MANAGEMENT | INTERFACE & CONNECTIVITY | TIMING & SYNCHRONIZATION | MEMORY & LOGIC | DATA CONVERSION The Analog and Digital CompanyTM PART ORDERING GUIDELINE PACKAGE OUTLINE AND DIMENSIONS 5.0 x 3.2 mm 7.0 x 5.0 mm MEMS OSCILLATOR EVALUATION BOARD FEATURES The MEMS Oscillator Evaluation Board is designed * Differential SMA output to provide a convenient platform to quickly evaluate * Standard banana plug power connectors the performance and operation of IDT's family of * Available in standard 5032 and 7050 size packages MEMS oscillators. The board includes provisions * Selectable output termination for both LVDS and LVPECL for LVPECL and LVDS termination and can also be * Switch control for Output Enable (OE) loscope. For VTT terminated LVPECL, a separate bias configured to terminate directly into a 50 oscil- voltage (VDD - 2V) is also generated onboard for measurement convenience. TECHNICAL SUPPORT EMAIL: MEMS_Support@idt.com WEBSITE: www.idt.com/go/MEMS DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT's sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. (c) Copyright 2013. All rights reserved. IDT | THE ANALOG + DIGITAL COMPANY PB_MEMS4M_REVB0413 4M SERIES MEMS PRODUCT BRIEF 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IDT (Integrated Device Technology): 4MA133330Y3BACTGI 4MA050000Z3AACTGI 4MA074250Z3AACUGI 4MA125000Y4AACTGI 4MA133330Y3BACUGI8 4MA233333Z4AACTGI 4MA150000Y3AACUGI 4MA400000Y3AACUGI 4MA400000Y3AACTGI8 4MA050000Z3AACTGI8 4MA074250Z4AACTGI 4MA125000Y4AACTGI8 4MA133330Z3AACTGI8 4MA150000Y3AACTGI 4MA133333Y3BACTGI8 4MA150000Y3AACUGI8 4MA074250Z4AACUGI8 4MA133330Z3AACTGI 4MA233333Z4AACUGI 4MA074250Z4AACTGI8 4MA074250Z3AACTGI 4MA074250Z3AACUGI8 4MA085000Z3AACUGI 4MA150000Y3AACTGI8 4MA400000Y3AACTGI 4MA133333Y3BACTGI 4MA133330Y3BACTGI8 4MA074250Z3AACTGI8 4MA085000Z3AACUGI8 4MA133330Y3BACUGI 4MA400000Y3AACUGI8 4MA050000Z3AACUGI8 4MA133330Z3AACUGI 4MA233333Z4AACTGI8 4MA133330Z3AACUGI8 4MA233333Z4AACUGI8 4MA074250Z4AACUGI 4MA085000Z3AACTGI8 4MA133333Y3BACUGI8 4MA133333Y3BACUGI 4MA085000Z3AACTGI 4MA050000Z3AACUGI 4MA125000Y4AACUGI 4MA125000Y4AACUGI8