IDT | THE ANALOG + DIGITAL COMPANY 4M SERIES MEMS PRODUCT BRIEF
Integrated Device Te chnology
The Analog and Digital Company™
2
MEMS Oscillators: 4M Series
POWER MANAGEMENT | ANALOG & RF | INTERFACE & CONNECTIVITY | TIMING & SYNCHRONIZATION | MEMORY & LOGIC | DATA CONVERSION
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters
of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied
warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. © Copyright 2013. All rights reserved. PB_MEMS4M_REVB0413
MEMS OSCILLATOR EVALUATION BOARD
PACKAGE OUTLINE AND DIMENSIONS
The MEMS Oscillator Evaluation Board is designed
to provide a convenient platform to quickly evaluate
the performance and operation of IDT’s family of
MEMS oscillators. The board includes provisions
for LVPECL and LVDS termination and can also be
configured to terminate directly into a 50 oscil-
loscope. For VTT terminated LVPECL, a separate bias
voltage (VDD - 2V) is also generated onboard for
measurement convenience.
TECHNICAL SUPPORT
EMAIL: MEMS_Support@idt.com WEBSITE: www.idt.com/go/MEMS
PART ORDERING GUIDELINE
FEATURES
• DifferentialSMAoutput
• Standardbananaplugpowerconnectors
• Availableinstandard5032and7050
size packages
• Selectableoutputterminationforboth
LVDS and LVPECL
• SwitchcontrolforOutputEnable(OE)
5.0 x 3.2 mm 7.0 x 5.0 mm