BENEFITS / FEATURES
• Short lead times
– Enables Just-In-Time
inventory management
• Standard differential outputs
– LVDS, LVPECL
• Standard package sizes
• Low Phase Jitter
– < 1.0 ps rms (12 kHz to 20 MHz )
• ± 50 ppm Frequency Stability
• Shock and vibration resistant
• Up to 40x higher reliability
than Quartz
www.idt.com/go/MEMS
IDT | THE ANALOG + DIGITAL COMPANY 4M SERIES MEMS PRODUCT BRIEF
LVDS
LVPECL
5032 7050
Package Size 5.0 x 3.2 mm 7.0 x 5.0 mm
Supply Voltage 2.5 or 3.3 V 2.5 or 3.3 V
Frequency Range 50 MHz ~ 625 MHz 50 MHz ~ 625 MHz
Frequency Stability ± 50 ppm ± 50 ppm
Temperature Range -40 to +85˚C -40 to +85˚C
Integrated Device Te chnology
The Analog and Digital Company
1
MEMS Oscillators: 4M Series
POWER MANAGEMENT | ANALOG & RF | INTERFACE & CONNECTIVITY | TIMING & SYNCHRONIZATION | MEMORY & LOGIC | DATA CONVERSION
Standard Frequencies (MHz)
ADDITIONAL CUSTOM FREQUENCIES AVAILABLE UPON REQUEST
100 106.25 125 133.33 148.5 150 155.52 156.25
159.375 160 161.133 187.5 200 212.5 250 312.5
5032
Packages!
Low Jitter
Low Cost
Fast Lead Times
Standard Packages
< 1 ps
Phase
Jitter!
IDT | THE ANALOG + DIGITAL COMPANY 4M SERIES MEMS PRODUCT BRIEF
Integrated Device Te chnology
The Analog and Digital Company
2
MEMS Oscillators: 4M Series
POWER MANAGEMENT | ANALOG & RF | INTERFACE & CONNECTIVITY | TIMING & SYNCHRONIZATION | MEMORY & LOGIC | DATA CONVERSION
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters
of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied
warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. © Copyright 2013. All rights reserved. PB_MEMS4M_REVB0413
MEMS OSCILLATOR EVALUATION BOARD
PACKAGE OUTLINE AND DIMENSIONS
The MEMS Oscillator Evaluation Board is designed
to provide a convenient platform to quickly evaluate
the performance and operation of IDT’s family of
MEMS oscillators. The board includes provisions
for LVPECL and LVDS termination and can also be
configured to terminate directly into a 50 oscil-
loscope. For VTT terminated LVPECL, a separate bias
voltage (VDD - 2V) is also generated onboard for
measurement convenience.
TECHNICAL SUPPORT
EMAIL: MEMS_Support@idt.com WEBSITE: www.idt.com/go/MEMS
PART ORDERING GUIDELINE
FEATURES
• DifferentialSMAoutput
• Standardbananaplugpowerconnectors
• Availableinstandard5032and7050
size packages
• Selectableoutputterminationforboth
LVDS and LVPECL
• SwitchcontrolforOutputEnable(OE)
5.0 x 3.2 mm 7.0 x 5.0 mm
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
IDT (Integrated Device Technology):
4MA133330Y3BACTGI 4MA050000Z3AACTGI 4MA074250Z3AACUGI 4MA125000Y4AACTGI
4MA133330Y3BACUGI8 4MA233333Z4AACTGI 4MA150000Y3AACUGI 4MA400000Y3AACUGI
4MA400000Y3AACTGI8 4MA050000Z3AACTGI8 4MA074250Z4AACTGI 4MA125000Y4AACTGI8
4MA133330Z3AACTGI8 4MA150000Y3AACTGI 4MA133333Y3BACTGI8 4MA150000Y3AACUGI8
4MA074250Z4AACUGI8 4MA133330Z3AACTGI 4MA233333Z4AACUGI 4MA074250Z4AACTGI8
4MA074250Z3AACTGI 4MA074250Z3AACUGI8 4MA085000Z3AACUGI 4MA150000Y3AACTGI8
4MA400000Y3AACTGI 4MA133333Y3BACTGI 4MA133330Y3BACTGI8 4MA074250Z3AACTGI8
4MA085000Z3AACUGI8 4MA133330Y3BACUGI 4MA400000Y3AACUGI8 4MA050000Z3AACUGI8
4MA133330Z3AACUGI 4MA233333Z4AACTGI8 4MA133330Z3AACUGI8 4MA233333Z4AACUGI8
4MA074250Z4AACUGI 4MA085000Z3AACTGI8 4MA133333Y3BACUGI8 4MA133333Y3BACUGI
4MA085000Z3AACTGI 4MA050000Z3AACUGI 4MA125000Y4AACUGI 4MA125000Y4AACUGI8