CAseries
Miniature Sized, High Ripple Current, Long Life
High ripple current and Long Life product withstanding load
life of 12000 hours(10000 hours for φD=10) at +105°C.
Suited for ballast application.
ALUMINUM ELECTROLYTIC CAPACITORS
Dimension table in next page.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem –25 to +105°C
160 to 450V
6.8 to 220µF
±20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
Printed with white color letter on dark brown sleeve.
After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Measurement frequency : 120Hz
Capacitance change
Leakage current
After an application of D.C. bias voltage plus the rated ripple
current for 12000 hours (10000 hours for φD =10) at 105°C
the peak voltage shall not exceed the rated D.C. voltage,
capacitors meet the characteristic requirements listed at right.
tan δ
Within ±20% of initial value
Initial specified value or less
200% or less of initial specified value
Z–25°C / Z+20°C
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
160
3200
3250
3350
6400
6450
6
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
tan δ (MAX.)
160
0.15 200
0.15 250
0.15 400
0.20 450
0.20
350
0.20
CA
PB
Long Life
CS
Smaller
• Please refer to page 20 about the end seal configulation.
CAT.8100W