CHEMINAX SPECIFICATION CONTROL DRAWING 50 OHM, AWG 18, SOLID, COAXIAL CABLE 5019D3318 Date: 11-2-94 Revision: Cc THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. 75 (nominal) 184 (maximum) NS CONDUCTOR AWG 19, Solid, Silver- Coated Copper Covered Steel DIELECTRIC Rayfoarm L Color - Natural 1ST SHIELD AWG 38, Silver-Coated Copper 2ND SHIELD AWG 36, Silver-Coated Copper JACKET Thermorad S Outer jacket color will be black (designated by a "-0" appended to the part number, e.g 501903318-0) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681 Raychem CAPACITANCE CHARACTERISTIC IMPEDANCE VELOCITY OF PROPAGATION ELECTRICAL CHARACTERISTICS 50 + 2 ohms, Method A 27.1 pF/ft. (nominal) 28.2 pF/ft (maximum) 75% (nominal) ADDITIONAL REQUIREMENTS ELECTRICAL CONDUCTOR RESISTANCE INSULATION RESISTANCE JACKET FLAWS SPARK TEST IMPULSE TEST VOLTAGE WITHSTAND (DIELECTRIC) ENVIRONMENTAL AGING STABILITY FLAMMABILITY HEAT SHOCK LOW TEMPERATURE- COLD BEND VOLTAGE WITHSTAND (POST ENVIRONMENTAL) PHYSICAL INSULATION (DIELECTRIC) ELONGATION TENSILE STRENGTH JACKET ELONGATION TENSILE STRENGTH JACKET THICKNESS SHIELD COVERAGE (each) WEIGHT Raychem Corporation 300 Constitution Drive Menlo Park, California 94025 1 800-2 RAYCHEM FAX: 415-361-6297 20.6 ohms/1000 ft. (nominal) 10,000 megohms (minimum) for 1000 ft. 1.0 kV (rms), 60 Hz 6.0 kV, (peak) 1000 volts (rms), (minimum) 135 C/-55 C/5.00 inch mandrel Method C 225C -55C/5.00 inch mandrel 1000 volts (rms), 1 minute 50% (minimum) 1000 Ibf/in? (minimum) 250% (minimum) 2000 Ibf/in? (minimum) .018 inch (nominal) 90% (minimum) 25.1 Ibs/1000 ft. (nominal) THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HERIN. REFER- NCE DOCUMENTS SHALL BE OF THE ISSUE !N EFFECT ON DATE OF INVITATION FOR BID.