POWER COMBICON Plugs and Headers PC 6/... for Currents up to 41 A, 10.16 mm Pitch The PC 6 plug connector features highly conductive metal alloys to offer a current carrying capacity of 41 A at a rated voltage of 1000 V. A double steel spring on the female side offers additional contact reliability especially in the case of extreme fluctuations of power or temperature. The plugs are also available with a screw flange for vibration-proof connection to the headers, with 2 to 8 positions. The plugs and headers are coded with the CP-HCC 4. coding profile. The self-adhesive marker cards SK 10/5 are used for labeling (see COMBICON catalog). Phoenix Contact GmbH & Co. KG * 32823 Blomberg, Germany Phone +49 52 35 3-00 * Fax +49 52 35 3-4 12 00 * www.phoenixcontact.com PC 6/...-ST-10,16 10.16 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description POWER COMBICON plugs, 10.16 mm pitch, color: green No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PC 6/2-ST-10,16 PC 6/3-ST-10,16 PC 6/4-ST-10,16 19 13 50 7 19 13 51 0 19 13 52 3 50 5 6 7 40.64 50.80 60.96 PC 6/5-ST-10,16 PC 6/6-ST-10,16 PC 6/7-ST-10,16 19 13 53 6 19 13 54 9 19 13 55 2 8 71.12 PC 6/8-ST-10,16 19 13 56 5 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 100 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog) (3) Screwdriver, blade: 1.0 x 4.0 x 100 mm, length: 200 mm SZS 1,0 x 4,0 12 05 06 6 10 Technical data Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG see description 10.16 - - I III / 2 1000 8 41 / 6.0 41 / 6.0 III / 3 1000 8 II / 2 1000 8 0.5 - 10.0 / 0.5 - 6.0 / 20 - 7 0.5 - 6.0 / 0.5 -6.0 0.5 - 6.0 / 0.5 - 6.0 0.5 - 2.5 0.5 - 4.0 12 A5 M4 1.2 - 1.5 PA V0 600 / 41 / 20 - 8 - 39 27,55 a+9,2 14,7 4,6 10,16 a Phoenix Contact page 2 of 9 PC 6/...-STF-10,16 with Screw Flange 10.16 mm Pitch HNote: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description POWER COMBICON plugs, 10.16 mm pitch, color: green, with screw flange No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PC 6/2-STF-10,16 PC 6/3-STF-10,16 PC 6/4-STF-10,16 19 13 57 8 19 13 58 1 19 13 59 4 50 5 6 7 40.64 50.80 60.96 PC 6/5-STF-10,16 PC 6/6-STF-10,16 PC 6/7-STF-10,16 19 13 60 4 19 13 61 7 19 13 62 0 8 71.12 PC 6/8-STF-10,16 19 13 63 3 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 100 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog) (3) Screwdriver, blade: 1.0 x 4.0 x 100 mm, length: 200 mm SZS 1,0 x 4,0 12 05 06 6 10 Technical data Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG see description 10.16 - - I III / 2 1000 8 41 / 6.0 41 / 6.0 III / 3 1000 8 II / 2 1000 8 0.5 - 10.0 / 0.5 - 6.0 / 20 - 7 0.5 - 6.0 / 0.5 -6.0 0.5 - 6.0 / 0.5 - 6.0 0.5 - 2.5 0.5 - 4.0 12 A5 M4 1.2 - 1.5 PA V0 600 / 41 / 20 - 8 - 39 a+9,2 27,55 9,36 14,7 4,6 10,16 10,16 a Phoenix PhoenixContact Contactpage page3 3von of 8 9 PC 6/...-G-10,16 10.16 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PC 6/2-G-10,16 PC 6/3-G-10,16 PC 6/4-G-10,16 19 13 64 6 19 13 65 9 19 13 66 2 50 5 6 7 40.64 50.80 60.96 PC 6/5-G-10,16 PC 6/6-G-10,16 PC 6/7-G-10,16 19 13 67 5 19 13 68 8 19 13 69 1 8 71.12 POWER COMBICON headers, 10.16 mm pitch, color: green, plug-in direction parallel to the PCB PC 6/8-G-10,16 19 13 70 1 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog) 100 Technical data Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG III / 3 6301) 6 I III / 2 1000 8 41 / - 41 / - II / 2 1000 8 - - - - - - - - - PA V0 300 / 41 / - ) 1000 V on printed circuit board. a 10,16 2,24 56,3 32 1,7 a+13,2 13,7 27,75 5,08 6 5,08 1 see description 10.16 1.7 1.0 x 1.2 5,08 2,24 5,08 Phoenix Contact page 4 of 9 6,6 10,16 a PC 6/...-GF-10,16 with Threaded Flange 10.16 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PC 6/2-GF-10,16 PC 6/3-GF-10,16 PC 6/4-GF-10,16 19 13 71 4 19 13 72 7 19 13 73 0 50 5 6 7 40.64 50.80 60.96 PC 6/5-GF-10,16 PC 6/6-GF-10,16 PC 6/7-GF-10,16 19 13 74 3 19 13 75 6 19 13 76 9 8 71.12 POWER COMBICON headers, 10.16 mm pitch, color: green, plug-in direction parallel to the PCB, with threaded flange PC 6/8-GF-10,16 19 13 77 2 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog) 100 Technical data Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG 1) 1000 V on printed circuit board. see description 10.16 1.7 1.0 x 1.2 I III / 2 1000 8 41 / - 41 / - III / 3 6301) 6 II / 2 1000 8 - - - - - - - - - PA V0 300 / 41 / - a 10,16 13,96 2,24 5,08 10,16 56,3 32 13,7 27,75 3,6 5,08 a+27,92 5,08 1,7 3,2 2,24 5,08 Phoenix Contact page 5 of 9 13,96 10,16 10,16 a PCV 6/...-G-10,16 10.16 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PCV 6/2-G-10,16 PCV 6/3-G-10,16 PCV 6/4-G-10,16 19 22 48 8 19 22 49 1 19 22 50 1 50 5 6 7 40.64 50.80 60.96 PCV 6/5-G-10,16 PCV 6/6-G-10,16 PCV 6/7-G-10,16 19 22 51 4 19 22 52 7 19 22 53 0 8 9 71.12 81.28 PCV 6/8-G-10,16 PCV 6/9-G-10,16 19 22 54 3 19 22 55 6 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog) Description POWER COMBICON headers, 10.16 mm pitch, color: green, plug-in direction vertical to the PCB, Technical data Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG 1) 1000 V on printed circuit board. see description 10.16 1.7 1.0 x 1.2 I III / 2 1000 8 41 / - 41 / - III / 3 6301) 6 II / 2 1000 8 - - - - - - - - - PA V0 300 / 41 / - 29,21 a a+13,2 28,3 1,7 1,8 52,6 10,16 4 5,08 5,08 6 10,16 15,16 Phoenix Contact page 6 of 9 1,8 6,6 10,16 a 100 PCV 6/...-GF-10,16 with Threaded Flange 10.16 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PCV 6/2-GF-10,16 PCV 6/3-GF-10,16 PCV 6/4-GF-10,16 19 22 56 9 19 22 57 2 19 22 58 5 50 5 6 7 40.64 50.80 60.96 PCV 6/5-GF-10,16 PCV 6/6-GF-10,16 PCV 6/7-GF-10,16 19 22 59 8 19 22 60 8 19 22 61 1 8 71.12 POWER COMBICON headers, 10.16 mm pitch, color: green, plug-in direction vertical to the PCB, with threaded flange PCV 6/8-GF-10,16 19 22 62 4 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog ) 100 Technical data Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG III / 3 6301) 6 I III / 2 1000 8 41 / - 41 / - II / 2 1000 8 - - - - - - - - - PA V0 300 / 41 / - ) 1000 V on printed circuit board. 28,9 a a+27,92 13,96 52,62 10,16 28,3 2,24 5,08 10,16 4 5,08 1 see description 10.16 1.7 1.0 x 1.2 1,7 3,2 10,16 15,16 Phoenix Contact page 7 of 9 1,8 13,96 10,16 10,16 a POWER COMBICON Plug-In Block for Direct Mounting, 10.16 mm Pitch All electronic components are pluggable and easy to maintain. The plug is not connected to the PCB, however, but vice versa. Plug-in blocks PCU 6/...-STD-10,16with a screw connection and vertical plug-in direction have a base plate with two mounting ears for screwing onto mounting plates or into component housings. They are available with 2 to 9 positions and a 10.16 mm pitch. The self-adhesive marker cards SK 10/5 are used for labeling (see COMBICON catalog) Phoenix Contact page 8 of 9 PCU 6/...-STD-10,16 10.16 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. No. of positions Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 10.16 20.32 30.48 PCU 6/2-STD-10,16 PCU 6/3-STD-10,16 PCU 6/4-STD-10,16 19 22 63 7 19 22 64 0 19 22 65 3 50 5 6 7 40.64 50.80 60.96 PCU 6/5-STD-10,16 PCU 6/6-STD-10,16 PCU 6/7-STD-10,16 19 22 66 6 19 22 67 9 19 22 68 2 8 9 71.12 81.28 PCU 6/8-STD-10,16 PCU 6/9-STD-10,16 19 22 69 5 19 22 70 5 (1) Coding profile, is inserted into the recess on the plug and header, insulating material: red CP-HCC 4 16 00 02 7 100 (2) Marker card, with 10 pcs. 10-section marker strips, white, self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog) (3) Screwdriver, blade: 1.0 x 4.0 x 100 mm, length: 200 mm SZS 1,0 x 4,0 12 05 06 6 10 Description POWER COMBICON plug-in block, 10.16 mm pitch, color: green Technical data see description 10.16 - - I III / 2 1000 8 41 / 6.0 41 / 6.0 II / 2 1000 8 http://www.phoenixcontact.com III / 3 1000 8 0.5 - 10.0 / 0.5 - 6.0 / 20 - 7 0.5 - 6.0 / 0.5 -6.0 0.5 - 6.0 / 0.5 - 6.0 0.5 - 2.5 0.5 - 4.0 12 A5 M4 1.2 - 1.5 PA V0 - - a 1 0 ,1 6 1 5 ,1 6 3 2 ,8 a + 3 0 ,3 2 3 3 ,9 2 9 ,7 6 ,5 1 0 ,1 6 1 0 ,1 6 1 0 ,1 6 a 5 Phoenix Contact page 9 of 9 5 Phoenix Contact 01.03.02 TNR: 5099540-02 Dimensions Pitch [mm] Hole diameter [mm| Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule with plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Thread Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA:[V]/[A]/AWG