The PC 6 plug connector features highly conductive
metal alloys to offer a current carrying capacity of 41 A
at a rated voltage of 1000 V. A double steel spring on
the female side offers additional contact reliability
especially in the case of extreme fluctuations of power
or temperature.
The plugs are also available with a screw flange for
vibration-proof connection to the headers, with 2 to 8
positions.
The plugs and headers are coded with the CP-HCC 4.
coding profile. The self-adhesive marker cards SK 10/5
are used for labeling (see COMBICON catalog).
POWER COMBICON Plugs and Headers PC 6/…
for Currents up to 41 A, 10.16 mm Pitch
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Dim.
Description No. of positions a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON plugs
,
10.16 mm pitch, color: green 2 10.16
3 20.32
4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
PC 6/2-ST-10,16
PC 6/3-ST-10,16
PC 6/4-ST-10,16
PC 6/5-ST-10,16
PC 6/6-ST-10,16
PC 6/7-ST-10,16
PC 6/8-ST-10,16
19 13 50 7
19 13 51 0
19 13 52 3
19 13 53 6
19 13 54 9
19 13 55 2
19 13 56 5
50
(1)
Coding profile,
is inserted into
the recess on the plug and header,
insulating material: red
CP-HCC 4 16 00 02 7
100
(2)
Marker card,
with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks
SK 10/5
(see COMBICON catalog)
(3)
Screwdriver
,
blade: 1.0 x 4.0 x 100 mm,
length: 200 mm
SZS 1,0 x 4,0 12 05 06 6
10
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| –
Pin dimensions [mm]x[mm] –
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 1000 1000 1000
Rated surge voltage [kV] 8 8 8
Nominal current / cross section [A]/[mm
2
] 41 / 6.0
Maximum load current / cross section [A]/[mm
2
] 41 / 6.0
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG 0.5 - 10.0 / 0.5 - 6.0 / 20 - 7
Stranded with ferrule without / with plastic sleeve [mm
2
] 0.5 - 6.0 / 0.5 -6.0
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
] 0.5 - 6.0 / 0.5 - 6.0
Stranded with ferrule with plastic sleeve [mm
2
] 0.5 - 2.5
Stranded with TWIN ferrule with plastic sleeve [mm
2
] 0.5 - 4.0
Stripping length
[mm] 12
Internal cylindrical gauge (IEC 60 947-1)
A 5
Thread
M 4
Torque
[Nm] 1.2 - 1.5
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG 600 / 41 / 20 - 8
CSA:[V]/[A]/AWG –
PC 6/…-ST-10,16
10.16 mm Pitch
Phoenix Contact page 2 of 9
Note:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
39
27,55
14,7
a+9,2
4,6 10,16
a
Phoenix Contact page 3 von 8
Dim.
Description No. of positions a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON plugs
,
10.16 mm pitch, color: green, 2 10.16
with screw flange 3 20.32
4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
PC 6/2-STF-10,16
PC 6/3-STF-10,16
PC 6/4-STF-10,16
PC 6/5-STF-10,16
PC 6/6-STF-10,16
PC 6/7-STF-10,16
PC 6/8-STF-10,16
19 13 57 8
19 13 58 1
19 13 59 4
19 13 60 4
19 13 61 7
19 13 62 0
19 13 63 3
50
(1)
Coding profile,
is inserted into
the recess on the plug and header,
insulating material: red
CP-HCC 4 16 00 02 7
100
(2)
Marker card,
with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks
SK 10/5
(see COMBICON catalog)
(3)
Screwdriver
,
blade: 1.0 x 4.0 x 100 mm,
length: 200 mm
SZS 1,0 x 4,0 12 05 06 6
10
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| –
Pin dimensions [mm]x[mm] –
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 1000 1000 1000
Rated surge voltage [kV] 8 8 8
Nominal current / cross section [A]/[mm
2
] 41 / 6.0
Maximum load current / cross section [A]/[mm
2
] 41 / 6.0
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG 0.5 - 10.0 / 0.5 - 6.0 / 20 - 7
Stranded with ferrule without / with plastic sleeve [mm
2
] 0.5 - 6.0 / 0.5 -6.0
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
] 0.5 - 6.0 / 0.5 - 6.0
Stranded with ferrule with plastic sleeve [mm
2
] 0.5 - 2.5
Stranded with TWIN ferrule with plastic sleeve [mm
2
] 0.5 - 4.0
Stripping length
[mm] 12
Internal cylindrical gauge (IEC 60 947-1)
A 5
Thread
M 4
Torque
[Nm] 1.2 - 1.5
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG 600 / 41 / 20 - 8
CSA:[V]/[A]/AWG –
PC 6/…-STF-10,16
with Screw Flange
10.16 mm Pitch
Phoenix Contact page 3 of 9
HNote:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
39
27,55
14,7
a+9,2
4,6 10,16
a10,16
9,36
Dim.
Description No. of positions a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON headers
,
10.16 mm pitch, color: green, 2 10.16
plug-in direction parallel to the PCB 3 20.32
4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
PC 6/2-G-10,16
PC 6/3-G-10,16
PC 6/4-G-10,16
PC 6/5-G-10,16
PC 6/6-G-10,16
PC 6/7-G-10,16
PC 6/8-G-10,16
19 13 64 6
19 13 65 9
19 13 66 2
19 13 67 5
19 13 68 8
19 13 69 1
19 13 70 1
50
(1)
Coding profile,
is inserted into
the recess on the plug and header,
insulating material: red
CP-HCC 4 16 00 02 7
100
(2)
Marker card,
with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks
SK 10/5
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| 1.7
Pin dimensions [mm]x[mm] 1.0 x 1.2
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 630
1
) 1000 1000
Rated surge voltage [kV] 6 8 8
Nominal current / cross section [A]/[mm
2
] 41 / –
Maximum load current / cross section [A]/[mm
2
] 41 / –
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG –
Stranded with ferrule without / with plastic sleeve [mm
2
]–
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
]–
Stranded with ferrule with plastic sleeve [mm
2
]–
Stranded with TWIN ferrule with plastic sleeve [mm
2
]–
Stripping length
[mm] –
Internal cylindrical gauge (IEC 60 947-1)
–
Thread
–
Torque
[Nm] –
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG 300 / 41 / -
CSA:[V]/[A]/AWG –
PC 6/…-G-10,16
10.16 mm Pitch
Phoenix Contact page 4 of 9
Note:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
5,08
5,08
13,7
32
56,3
27,75
2,24
a+13,2
6,6 a10,16
5,08
6
a
10,16
2,24
5,08
1,7
1
) 1000 V on printed circuit board.
Dim.
Description No. of positions a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON headers
,
10.16 mm pitch, color: green, 2 10.16
plug-in direction parallel to the PCB, 3 20.32
with threaded flange 4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
PC 6/2-GF-10,16
PC 6/3-GF-10,16
PC 6/4-GF-10,16
PC 6/5-GF-10,16
PC 6/6-GF-10,16
PC 6/7-GF-10,16
PC 6/8-GF-10,16
19 13 71 4
19 13 72 7
19 13 73 0
19 13 74 3
19 13 75 6
19 13 76 9
19 13 77 2
50
(1)
Coding profile,
is inserted into
the recess on the plug and header,
insulating material: red
CP-HCC 4 16 00 02 7
100
(2)
Marker card,
with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks
SK 10/5
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| 1.7
Pin dimensions [mm]x[mm] 1.0 x 1.2
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 630
1
) 1000 1000
Rated surge voltage [kV] 6 8 8
Nominal current / cross section [A]/[mm
2
] 41 / –
Maximum load current / cross section [A]/[mm
2
] 41 / –
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG –
Stranded with ferrule without / with plastic sleeve [mm
2
]–
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
]–
Stranded with ferrule with plastic sleeve [mm
2
]–
Stranded with TWIN ferrule with plastic sleeve [mm
2
]–
Stripping length
[mm] –
Internal cylindrical gauge (IEC 60 947-1)
–
Thread
–
Torque
[Nm] –
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG 300 / 41 / -
CSA:[V]/[A]/AWG –
PC 6/…-GF-10,16
with Threaded Flange
10.16 mm Pitch
Phoenix Contact page 5 of 9
Note:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
5,08
5,08
13,7
32
56,3
27,75
2,24
a
13,96 10,16 10,16
a+27,92
13,96
a
10,1610,16
1,7 3,2
2,24
3,6
5,08 5,08
1
) 1000 V on printed circuit board.
Dim.
Description No. of positions a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON headers
,
10.16 mm pitch, color: green, 2 10.16
plug-in direction vertical to the PCB, 3 20.32
4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
9 81.28
PCV 6/2-G-10,16
PCV 6/3-G-10,16
PCV 6/4-G-10,16
PCV 6/5-G-10,16
PCV 6/6-G-10,16
PCV 6/7-G-10,16
PCV 6/8-G-10,16
PCV 6/9-G-10,16
19 22 48 8
19 22 49 1
19 22 50 1
19 22 51 4
19 22 52 7
19 22 53 0
19 22 54 3
19 22 55 6
50
(1)
Coding profile,
is inserted into
the recess on the plug and header,
insulating material: red
CP-HCC 4 16 00 02 7
100
(2)
Marker card,
with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks
SK 10/5
(see COMBICON catalog)
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| 1.7
Pin dimensions [mm]x[mm] 1.0 x 1.2
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 630
1
) 1000 1000
Rated surge voltage [kV] 6 8 8
Nominal current / cross section [A]/[mm
2
] 41 / –
Maximum load current / cross section [A]/[mm
2
] 41 / –
Connection capacity
Solid / stranded / conductor sizes [mm
2
]/[mm
2
]/AWG –
Stranded with ferrule without / with plastic sleeve [mm
2
]–
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm
2
]–
Stranded with ferrule with plastic sleeve [mm
2
]–
Stranded with TWIN ferrule with plastic sleeve [mm
2
]–
Stripping length
[mm] –
Internal cylindrical gauge (IEC 60 947-1)
–
Thread
–
Torque
[Nm] –
Insulating material
PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG 300 / 41 / -
CSA:[V]/[A]/AWG –
PCV 6/…-G-10,16
10.16 mm Pitch
Phoenix Contact page 6 of 9
Note:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
10,16 1,8 10,166,6
a+13,2
15,16
29,21
28,3
452,6
a
5,08
6
a
10,16
1,8
5,08
1,7
1
) 1000 V on printed circuit board.
Dim.
Description No. of positions a
[mm]
Type Order No.
Pcs./Pkt.
POWER COMBICON headers
,
10.16 mm pitch, color: green, 2 10.16
plug-in direction vertical to the PCB, 3 20.32
with threaded flange 4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
PCV 6/2-GF-10,16
PCV 6/3-GF-10,16
PCV 6/4-GF-10,16
PCV 6/5-GF-10,16
PCV 6/6-GF-10,16
PCV 6/7-GF-10,16
PCV 6/8-GF-10,16
19 22 56 9
19 22 57 2
19 22 58 5
19 22 59 8
19 22 60 8
19 22 61 1
19 22 62 4
50
(1)
Coding profile,
is inserted into
the recess on the plug and header,
insulating material: red
CP-HCC 4 16 00 02 7
100
(2)
Marker card,
with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks
SK 10/5
(see COMBICON catalog )
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| 1.7
Pin dimensions [mm]x[mm] 1.0 x 1.2
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 6301) 1000 1000
Rated surge voltage [kV] 6 8 8
Nominal current / cross section [A]/[mm2] 41 / –
Maximum load current / cross section [A]/[mm2] 41 / –
Connection capacity
Solid / stranded / conductor sizes [mm2]/[mm2]/AWG –
Stranded with ferrule without / with plastic sleeve [mm2]–
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm2]–
Stranded with ferrule with plastic sleeve [mm2]–
Stranded with TWIN ferrule with plastic sleeve [mm2]–
Stripping length [mm] –
Internal cylindrical gauge (IEC 60 947-1) –
Thread –
Torque [Nm] –
Insulating material PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG 300 / 41 / -
CSA:[V]/[A]/AWG –
PCV 6/…-GF-10,16
with Threaded Flange
10.16 mm Pitch
Phoenix Contact page 7 of 9
Note:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
10,16
28,3
4
52,62
28,9
1,8
15,16
10,16a
a+27,92
13,96 10,16
13,96
a
10,1610,16
2,24
5,08 5,08
1,7 3,2
1) 1000 V on printed circuit board.
All electronic components are pluggable and easy to
maintain. The plug is not connected to the PCB,
however, but vice versa.
Plug-in blocks PCU 6/…-STD-10,16with a screw
connection and vertical plug-in direction have a base
plate with two mounting ears for screwing onto
mounting plates or into component housings.
They are a v ailable with 2 to 9 positions and a 10.16 mm
pitch.
The self-adhesive marker cards SK 10/5 are used for
labeling (see COMBICON catalog)
POWER COMBICON Plug-In Block
for Direct Mounting, 10.16 mm Pitch
Phoenix Contact page 8 of 9
Dim.
Description No. of positions a
[mm] Type Order No. Pcs./Pkt.
POWER COMBICON plug-in block,
10.16 mm pitch, color: green 2 10.16
3 20.32
4 30.48
5 40.64
6 50.80
7 60.96
8 71.12
9 81.28
PCU 6/2-STD-10,16
PCU 6/3-STD-10,16
PCU 6/4-STD-10,16
PCU 6/5-STD-10,16
PCU 6/6-STD-10,16
PCU 6/7-STD-10,16
PCU 6/8-STD-10,16
PCU 6/9-STD-10,16
19 22 63 7
19 22 64 0
19 22 65 3
19 22 66 6
19 22 67 9
19 22 68 2
19 22 69 5
19 22 70 5
50
(1) Coding profile, is inserted into
the recess on the plug and header,
insulating material: red CP-HCC 4 16 00 02 7 100
(2) Marker card, with 10 pcs.
10-section marker strips, white,
self-adhesive, for 100 terminal blocks SK 10/5 (see COMBICON catalog)
(3) Screwdriver,
blade: 1.0 x 4.0 x 100 mm,
length: 200 mm SZS 1,0 x 4,0 12 05 06 6 10
Technical data
Dimensions see description
Pitch [mm] 10.16
Hole diameter [mm| –
Pin dimensions [mm]x[mm] –
Technical data in accordance with IEC/ DIN VDE
Insulating material group – I
Surge voltage category / contamination class –/– III / 3 III / 2 II / 2
Rated voltage [V] 1000 1000 1000
Rated surge voltage [kV] 8 8 8
Nominal current / cross section [A]/[mm2] 41 / 6.0
Maximum load current / cross section [A]/[mm2] 41 / 6.0
Connection capacity
Solid / stranded / conductor sizes [mm2]/[mm2]/AWG 0.5 - 10.0 / 0.5 - 6.0 / 20 - 7
Stranded with ferrule without / with plastic sleeve [mm2] 0.5 - 6.0 / 0.5 -6.0
Multiple connection (2 conductors with same cross section)
Solid / stranded [mm2] 0.5 - 6.0 / 0.5 - 6.0
Stranded with ferrule with plastic sleeve [mm2] 0.5 - 2.5
Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 - 4.0
Stripping length [mm] 12
Internal cylindrical gauge (IEC 60 947-1) A 5
Thread M 4
Torque [Nm] 1.2 - 1.5
Insulating material PA
Inflammability class in acc. with UL 94 V0
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG –
CSA:[V]/[A]/AWG –
PCU 6/…-STD-10,16
10.16 mm Pitch
Phoenix Contact page 9 of 9
Note:
COMBICON plug connectors may only be actuated in the no-load
condition. If smaller loads need to be switched for operational reasons,
experimental values are available on request.
3 3 , 9
3 2 , 8
2 9 , 7
a + 3 0 , 3 2
a
1 0 , 1 61 0 , 1 6
5
Phoenix Contact 01.03.02 TNR: 5099540-02 http://www.phoenixcontact.com
a
1 0 , 1 6 1 0 , 1 6 1 5 , 1 6
6 , 5
5
