P4KE440A - Shanghai Sunrise Electronics

SHANGHAI SUNRISE ELECTRONICS CO., LTD.

FEATURES

• 400W peak pulse power capability

• Excellent clamping capability

• Low incremental surge resistance

• Fast response time:

typically less than 1.0ps from 0V to VBR

for unidirectional and 5.0nS for bidirectional types.

• High temperature soldering guaranteed:

265oC/10S/9.5mm lead len

th at 5 lbs tension

MECHANICAL DATA

• Terminal: Plated axial leads solderable per

MIL-STD 202E, method 208C

• Case: Molded with UL-94 Class V-O recognized

flame retardant epoxy

• Polarity: Color band denotes cathode except for

unidirectional types.

• Mounting position: Any

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

(Ratings at 25oC ambient temperature unless otherwise specified)

SYMBOL VALUE UNITS

Peak power dissipation (Note 1) Pppm Minimum 400 W

Peak pulse reverse current (Note 1) Ippm See Table A

Steady state power dissipation (Note 2) Pm(av) 1.0 W

Peak forward surge current (Note 3) IFSM 40 A

Maximum instantaneous forward voltage at 50A

for unidirectional only (Note 4)

Operating junction and storage temperature range TSTG,TJ-55 to + 175 oC

Notes:

1. 10/1000

S waveform non-re

etitive current

ulse, and derated above Ta=25oC

2. Tl=75oC, lead len

th 9.5mm, Mounted on co

ad area of

(

40×40mm

)

3. Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.

4. VF=3.5V max. for devices of V

(

)

200V, and VF=5.0V max. for devices of V

(

)

>200V

DEVICES FOR BIDIRECTIONAL APPLICATIONS

1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.

2. For bidirectional use 'C' or 'CA' suffix for types P4KE7.5 thru types P4KE440A

(e.g. P4KE7.5C,P4KE440CA), for unidirectional don't use 'C' suffix after types.

3. For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.

4. Electrical characteristics apply in both directions. htt

://www.sse-diode.com

RATINGS

VF3.5/6.5 V

P4KE6.8 THRU P4KE440CA

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE:6.8-440V

PEAK PULSE POWER: 400W

DO - 41

Dimensions in inches and (millimeters)

TECHNICAL

SPECIFICATION

MIN MAX

*P4KE6.8 6.12 7.48 10.0 5.50 1000.0 38.0 10.8 0.057

*P4KE6.8A 6.45 7.14 10.0 5.80 1000.0 40.0 10.5 0.057

P4KE7.5 6.75 8.25 10.0 6.05 500.0 36.0 11.7 0.061

P4KE7.5A 7.13 7.88 10.0 6.40 500.0 37.0 11.3 0.061

P4KE8.2 7.38 9.02 10.0 6.63 200.0 33.0 12.5 0.065

P4KE8.2A 7.79 8.61 10.0 7.02 200.0 35.0 12.1 0.065

P4KE9.1 8.19 10.0 1.0 7.37 50.0 30.0 13.8 0.068

P4KE9.1A 8.65 9.55 1.0 7.78 50.0 31.0 13.4 0.068

P4KE10 9.00 11.0 1.0 8.10 10.0 28.0 15.0 0.073

P4KE10A 9.50 10.5 1.0 8.55 10.0 29.0 14.5 0.073

P4KE11 9.90 12.1 1.0 8.92 5.0 26.0 16.2 0.075

P4KE11A 10.5 11.6 1.0 9.40 5.0 27.0 15.6 0.075

P4KE12 10.8 13.2 1.0 9.72 5.0 24.0 17.3 0.078

P4KE12A 11.4 12.6 1.0 10.2 5.0 25.0 16.7 0.078

P4KE13 11.7 14.3 1.0 10.5 5.0 22.0 19.0 0.081

P4KE13A 12.4 13.7 1.0 11.1 5.0 23.0 18.2 0.081

P4KE15 13.5 16.5 1.0 12.1 5.0 19.0 22.0 0.084

P4KE15A 14.3 15.8 1.0 12.8 5.0 20.0 21.2 0.084

P4KE16 14.4 17.6 1.0 12.9 5.0 18.0 23.5 0.086

P4KE16A 15.2 16.8 1.0 13.6 5.0 19.0 22.5 0.086

P4KE18 16.2 19.8 1.0 14.5 5.0 16.0 26.5 0.088

P4KE18A 17.1 18.9 1.0 15.3 5.0 17.0 25.2 0.088

P4KE20 18.0 22.0 1.0 16.2 5.0 14.0 29.1 0.090

P4KE20A 19.0 21.0 1.0 17.1 5.0 15.0 27.7 0.090

P4KE22 19.8 24.2 1.0 17.8 5.0 13.0 31.9 0.092

P4KE22A 20.9 23.1 1.0 18.8 5.0 14.0 30.6 0.092

P4KE24 21.6 26.4 1.0 19.4 5.0 12.0 34.7 0.094

P4KE24A 22.8 25.2 1.0 20.5 5.0 13.0 33.2 0.094

P4KE27 24.3 29.7 1.0 21.8 5.0 11.0 39.1 0.096

P4KE27A 25.7 28.4 1.0 23.1 5.0 11.2 37.5 0.096

P4KE30 27.0 33.0 1.0 24.3 5.0 10.0 43.5 0.097

P4KE30A 28.5 31.5 1.0 25.6 5.0 10.0 41.4 0.097

P4KE33 29.7 36.3 1.0 26.8 5.0 9.0 47.7 0.098

P4KE33A 31.4 34.7 1.0 28.2 5.0 9.0 45.7 0.098

P4KE36 32.4 39.6 1.0 29.1 5.0 8.0 52.0 0.099

P4KE36A 34.2 37.8 1.0 30.8 5.0 8.4 49.9 0.099

P4KE39 35.1 42.9 1.0 31.6 5.0 7.4 56.4 0.100

P4KE39A 37.1 41.0 1.0 33.3 5.0 7.8 53.9 0.100

P4KE43 38.7 47.3 1.0 34.8 5.0 6.8 61.9 0.101

P4KE43A 40.9 45.2 1.0 36.8 5.0 7.1 59.3 0.101

P4KE47 42.3 51.7 1.0 38.1 5.0 6.2 67.8 0.101

P4KE47A 44.7 49.4 1.0 40.2 5.0 5.0 64.8 0.101

P4KE51 45.9 56.1 1.0 41.3 5.0 5.7 73.5 0.102

P4KE51A 48.5 53.6 1.0 43.6 5.0 6.0 70.1 0.102

P4KE56 50.4 61.6 1.0 45.4 5.0 5.2 80.5 0.103

P4KE56A 53.2 58.8 1.0 47.8 5.0 5.5 77.0 0.103

* Not available as bidirectional devices http://www.sse-diode.com

( at TA=25oC unless otherwise noted )

ELECTRICAL CHARACTERISTICS

Device Type

Breakdown

Voltage V(BR)

(Volts)

(NOTE 1)

Test

Current

IT (mA)

Stand-off

Voltage

VWM

(Volts)

Maximum

Reverse

Leakage at

VWM ID(µA)

(NOTE 3)

Maximum

Peak Pulse

Reverse

Current Ippm

(Amps)

(NOTE 2)

Maximum

Clamping

Voltage at

Ippm VC

(Volts)

Maximum

Temperature

Coefficient of

V(BR) (%/oC)

MIN MAX

P4KE62 55.8 68.2 1.0 50.2 5.0 4.7 89.0 0.104

P4KE62A 58.9 65.1 1.0 53.0 5.0 5.0 85.0 0.104

P4KE68 61.2 74.8 1.0 55.1 5.0 4.3 98.0 0.104

P4KE68A 64.6 71.4 1.0 58.1 5.0 4.6 92.0 0.104

P4KE75 67.5 82.5 1.0 60.7 5.0 3.9 108.0 0.105

P4KE75A 71.3 78.8 1.0 64.1 5.0 4.1 103.0 0.105

P4KE82 73.8 90.2 1.0 66.4 5.0 3.6 118.0 0.105

P4KE82A 77.9 86.1 1.0 70.1 5.0 3.7 113.0 0.105

P4KE91 81.9 100 1.0 73.7 5.0 3.2 131.0 0.106

P4KE91A 86.5 95.5 1.0 77.8 5.0 3.4 125.0 0.106

P4KE100 90.0 110 1.0 81.0 5.0 2.9 144.0 0.106

P4KE100A 95.0 105 1.0 85.5 5.0 3.1 137.0 0.106

P4KE110 99.0 121 1.0 89.2 5.0 2.7 158.0 0.107

P4KE110A 105 116 1.0 94.0 5.0 2.8 152.0 0.107

P4KE120 108 132 1.0 97.2 5.0 2.4 173.0 0.107

P4KE120A 114 126 1.0 102 5.0 2.5 165.0 0.107

P4KE130 117 143 1.0 105 5.0 2.2 187.0 0.107

P4KE130A 124 137 1.0 111 5.0 2.3 179.0 0.107

P4KE150 135 165 1.0 121 5.0 2.0 215.0 0.108

P4KE150A 143 158 1.0 128 5.0 2.0 207.0 0.108

P4KE160 144 176 1.0 130 5.0 1.8 230.0 0.108

P4KE160A 152 168 1.0 136 5.0 1.9 219.0 0.108

P4KE170 153 187 1.0 138 5.0 1.7 244.0 0.108

P4KE170A 162 179 1.0 145 5.0 1.8 234.0 0.108

P4KE180 162 198 1.0 146 5.0 1.6 258.0 0.108

P4KE180A 171 189 1.0 154 5.0 1.7 246.0 0.108

P4KE200 180 220 1.0 162 5.0 1.5 287.0 0.108

P4KE200A 190 210 1.0 171 5.0 1.53 274.0 0.108

P4KE220 198 242 1.0 175 5.0 1.16 344.0 0.108

P4KE220A 209 231 1.0 185 5.0 1.22 328.0 0.108

P4KE250 225 275 1.0 202 5.0 1.11 360.0 0.110

P4KE250A 237 263 1.0 214 5.0 1.16 344.0 0.110

P4KE300 270 330 1.0 243 5.0 0.93 430.0 0.110

P4KE300A 285 315 1.0 256 5.0 0.97 414.0 0.110

P4KE350 315 385 1.0 284 5.0 0.79 504.0 0.110

P4KE350A 332 368 1.0 300 5.0 0.83 482.0 0.110

P4KE400 360 440 1.0 324 5.0 0.70 574.0 0.110

P4KE400A 380 420 1.0 342 5.0 0.73 548.0 0.110

P4KE440 396 484 1.0 356 5.0 0.66 631.0 0.110

P4KE440A 418 462 1.0 376 5.0 0.69 602.0 0.110

NOTES:

1. V

(

)

measured after IT applied for 300µs, IT=square wave pulse or equivalent

2. Surge current waveform and derated

3. For bidirectional types having VWM of 10 volts and less, the ID limit is doubled

http://www.sse-diode.com

ELECTRICAL CHARACTERISTICS

Maximum

Temperature

Coefficient of

V(BR) (%/oC)

Device Type

( at TA=25oC unless otherwise noted )

Breakdown

Voltage V(BR)

(Volts)

(NOTE 1)

Test

Current

IT (mA)

Stand-off

Voltage

VWM

(Volts)

Maximum

Reverse

Leakage at

VWM ID(µA)

(NOTE 3)

Maximum

Peak Pulse

Reverse

Current Ippm

(Amps)

(NOTE 2)

Maximum

Clamping

Voltage at

Ippm VC

(Volts)