www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509
1Revision: 07-Jun-10
CSC
Vishay Dale
Thick Film Resistor Networks, Single-In-Line,
Conformal Coated SIP
FEATURES
•Isolated, bussed and dual terminator schematics
available
•Body height: “A” profile = 0.195" (4.95 mm) and
“B” profile = 0.295" (7.50 mm) standard; custom
“C” profile = 0.350" (8.89 mm) also available
•“A” profile standard in 4 thru 12 pins
•Thick film resistive elements
•Reduces total assembly costs
•Resistor elements protected by tough epoxy
conformal coating
•Wide resistance range (10 Ω to 2.2 MΩ)
•Available in bulk pack as standard; optional tube pack is
also available
•Meets EIA/ECA-CB23 rev. G whisker test requirements for
Class 1A products
•Compliant to RoHS directive 2002/95/EC
Notes
• See derating curves for package power rating
(1) For resistor power ratings at + 25 °C see derating curves
(2) ± 2 % standard, ± 1 % and ± 5 % available
(3) Continuous working voltage shall be or maximum working voltage, whichever is less
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
SCHEMATIC
PACKAGE
HEIGHT
POWER RATING
ELEMENT (1)
P70 °C W
RESISTANCE
RANGE
Ω
TEMP. COEFFICIENT
(- 55 °C to + 125 °C)
± ppm/°C
TOL. (2)
± %
TCR TRACKING (1)
(- 55 °C to + 125 °C)
± ppm/°C
MAX. WORKING
VOLTAGE (3)
VDC
CSCxxx01 A0.20
10 to 50
50.1 to 2.2M
250
100 1, 2, 5 50 100
B0.25
CSCxxx03 A0.30
10 to 50
50.1 to 2.2M
250
100 1, 2, 5 50 100
B0.40
CSCxxx05 A0.20
10 to 50
50.1 to 2.2M
250
100 1, 2, 5 150 100
B0.25
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSC08A03100RGEK (preferred part number format)
GLOBAL
MODEL PIN COUNT PAC KA GE
HEIGHT SCHEMATIC RESISTANCE
VALUE TOLERANCE
CODE PACKAGING SPECIAL
CSC 04 to 12 pin
available
04 = 4 pin
08 = 8 pin
12 = 12 pin
A = “A” profile
B = “B” profile 01 = Bussed
03 = Isolated
00 = Special
R = Ω
K = kΩ
M = MΩ
10R0 = 10 Ω
680K = 680 kΩ
1M00 = 1.0 MΩ
F = ± 1 %
G = ± 2 %
J = ± 5 %
S = Special
EK = Lead (Pb)-free, bulk
PA = Tin/lead, bulk Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
Historical Part Number example: CSC08A03101GEK (will continue to be accepted)
CSC 08 A 03 101 G EK
HISTORICAL
MODEL PIN COUNT PAC K AG E
HEIGHT SCHEMATIC RESISTANCE
VALUE TOLERANCE
CODE PA C K AG I N G
New Global Part Numbering: CSC08A05131AGEK (preferred part number format)
GLOBAL
MODEL PIN COUNT PAC KA GE
HEIGHT SCHEMATIC RESISTANCE
VALUE TOLERANCE
CODE PACKAGING SPECIAL
CSC 04 to 12 pin
available
04 = 4 pin
08 = 8 pin
12 = 12 pin
A = “A” profile
B = “B” profile 05 = Dual
terminator
3 digit impedance
code, followed by
alpha modifier
(see impedance
codes table)
F = ± 1 %
G = ± 2 %
J = ± 5 %
EK = Lead (Pb)-free, bulk
PA = Tin/lead, bulk Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
Historical Part Number example: CSC08A05131AGEK (will continue to be accepted)
CSC 08 A 05 221 331 G EK
HISTORICAL
MODEL PIN COUNT PAC K AG E
HEIGHT SCHEMATIC RESISTANCE
VALUE 1 RESISTANCE
VALUE 2 TOLERANCE
CODE PA CK A G I NG
P x R
SC08A051C31AGEK
SC08A031C00RGEK
Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 07-Jun-10 2
CSC
Thick Film Resistor Networks, Single-In-Line,
Conformal Coated SIP Vishay Dale
DIMENSIONS in inches (millimeters)
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CSC SERIES
Voltage Coefficient of Resistance Veff < 50 ppm typical
Dielectric Strength VAC 200
Isolation Resistance (03 Schematic) Ω> 100M
Operating Temperature Range °C - 55 to + 125
0.012 ± 0.003
(0.305 ± 0.076)
(Leads are along
centerline of body)
0.098 (2.49) Max.
0.045
(1.14)
Pi n
#1
C
Max.
B
A
Max.
0.018 ± 0.003
(0.457 ± 0.076)
0.100 ± 0.010 (2.54 ± 0.254)
Non-Accumulative
0.050 (1.27) Max. 0.032
(0.813)
0.130 ± 0.010
(3.30 ± 0.254)
01 SCHEMATIC GLOBAL
MODEL
NUMBER OF
RESISTORS A (Maximum) B C (Maximum)
CSC04 3 0.390 (9.91) 0.300 (7.62)
“A” profile = 0.195 (4.95)
“B” profile = 0.295 (7.50)
CSC05 4 0.490 (12.45) 0.400 (10.16)
CSC06 5 0.590 (14.99) 0.500 (12.70)
CSC07 6 0.690 (17.53) 0.600 (15.24)
CSC08 7 0.790 (20.07) 0.700 (17.78)
CSC09 8 0.890 (22.61) 0.800 (20.32)
CSC10 9 0.990 (25.15) 0.900 (22.86)
CSC11 10 1.09 (27.69) 1.00 (25.40)
CSC12 11 1.19 (30.23) 1.100 (27.94)
03 SCHEMATIC GLOBAL
MODEL
NUMBER OF
RESISTORS A (Maximum) B C (Maximum)
CSC04 2 0.390 (9.91) 0.300 (7.62)
“A” profile = 0.195 (4.95)
“B” profile = 0.295 (7.50)
CSC06 3 0.590 (14.99) 0.500 (12.70)
CSC08 4 0.790 (20.07) 0.700 (17.78)
CSC10 5 0.990 (25.15) 0.900 (22.86)
CSC12 6 1.19 (30.23) 1.100 (27.94)
05 SCHEMATIC GLOBAL
MODEL
NUMBER OF
RESISTORS A (Maximum) B C (Maximum)
CSC04 4 0.390 (9.91) 0.300 (7.62)
“A” profile = 0.195 (4.95)
“B” profile = 0.295 (7.50)
CSC05 6 0.490 (12.45) 0.400 (10.16)
CSC06 8 0.590 (14.99) 0.500 (12.70)
CSC07 10 0.690 (17.53) 0.600 (15.24)
CSC08 12 0.790 (20.07) 0.700 (17.78)
CSC09 14 0.890 (22.61) 0.800 (20.32)
CSC10 16 0.990 (25.15) 0.900 (22.86)
CSC11 18 1.09 (27.69) 1.00 (25.40)
CSC12 20 1.19 (30.23) 1.100 (27.94)
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R1
R2
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509
3Revision: 07-Jun-10
CSC
Vishay Dale Thick Film Resistor Networks, Single-In-Line,
Conformal Coated SIP
STOCKED RESISTANCE VALUES IN OHMS
(“G” TOLERANCE)
Standard E-24 resistance values stocked. Consult factory.
Many dual terminator resistance values stocked. Consult
factory.
MECHANICAL SPECIFICATIONS
Marking Resistance
to Solvents
Permanency testing per
MIL-STD-202, method 215
Solderability Per MIL-STD-202, method 208E,
RMA flux
Body High alumina, epoxy coated
Terminals Solder plated leads
IMPEDANCE CODES
CODE R1 (Ω) R2 (Ω)CODE R1 (Ω) R2 (Ω)
500B 82 130 141A 270 270
750B 120 200 181A 330 390
800C 130 210 191A 330 470
990A 160 260 221B 330 680
101C 180 240 281B 560 560
111C 180 270 381B 560 1.2K
121B 180 390 501C 620 2.7K
121C 220 270 102A 1.5K 3.3K
131A 220 330 202B 3K 6.2K
”A“ Profile
1.90
1.50
1.15
0.45
0.30
- 50 + 25 + 70 + 125 + 150
CSC10A Package
Ambient Te mperature °C
Deratin
g
Power Rating (W)
CSC08A Package
CSC06A Package
Single Resistor
03 Schematic
01 and 05 Schematics
”B“ Profile
- 50 + 25 + 70 + 125 + 150
2.50
2.00
1.50
0.60
0.38
CSC08B Packag e
03 Schematic
Single Resisto r
CSC06B Package
CSC10B Package
Ambient Te mperature °C
Deratin g
01 and 05 Schematics
Power Rating (W)
“A” PROFILE + 70 °C PACKAGE RATINGS
CSC12A 1.5 W
CSC11A 1.37 W
CSC10A 1.25 W
CSC09A 1.12 W
CSC08A 1.00 W
CSC07A 0.87 W
CSC06A 0.75 W
CSC05A 0.62 W
CSC04A 0.40 W
“B” PROFILE + 70 °C PACKAGE RATINGS
CSC12B 1.90 W
CSC11B 1.75 W
CSC10B 1.60 W
CSC09B 1.45 W
CSC08B 1.30 W
CSC07B 1.15 W
CSC06B 1.00 W
CSC05B 0.80 W
CSC04B 0.60 W
Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 07-Jun-10 4
CSC
Thick Film Resistor Networks, Single-In-Line,
Conformal Coated SIP Vishay Dale
CIRCUIT APPLICATIONS
01 Schematic Bussed
The CSCxxx01 single-in-line resistor networks provide the user with
nominally equal resistors, each connected to a common pin
(pin no. 1). Commonly used in the following applications:
• “Wired OR” Pull-up • Open Collector Pull-up
• Power Gate Pull-up • TTL Input Pull-down
• MOS/ROM Pull-up/Pull-down • TTL Unused Gate Pull-up
* “A” profile standard, “B” Profile available.
03 Schematic Isolated
The CSCxxx03 single-in-line resistor networks provide the user with
nominally equal resistors. Each resistor is isolated from all others.
Commonly used in the following applications:
• “Wired OR” Pull-up • Long-Line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Power Gate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
* “A” Profile standard, “B” Profile available.
05 Schematic
Dual Terminator
The CSCxxx05 circuits contain series pairs of resistors. Each series
pair is connected between two common lines. The junction of these
resistor pairs is connected to the input terminals. The 05 circuits are
designed for TTL dual-line termination and pulse squaring.
* “A” profile standard, “B” Profile available.
PERFORMANCE
TEST CONDITIONS MAX. ΔR (TYPICAL TEST LOTS)
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage, 5 s ± 0.25 % ΔR
Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR
Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 1.00 % ΔR
Resistance to Soldering Heat Leads immersed in + 350 °C solder to within 1/16" of body for 3 s ± 0.25 % ΔR
Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR
Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR
Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full
1000 h period. Derated according to the curve. ± 1.00 % ΔR
Terminal Strength 4.5 pound pull for 30 s ± 0.25 % ΔR
Insulation Resistance 10 000 MΩ (minimum) -
Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) -
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R1
R2
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
