DATA SHEET SMVA1705-004LF: Hyperabrupt Junction Tuning Varactor Automotive Applications Infotainment Navigation Telematics Garage door openers Wireless control systems Features AEC-Q101 qualified Low series resistance High capacitance ratio SOT-23 package (MSL1, 260 C per JEDEC J-STD-020) Description The SMVA1705-004LF silicon hyperabrupt junction varactor diode is specifically designed for in-vehicle infotainment applications. Table 1 describes the SMVA1705-004LF package and marking. Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. Table 1. Packaging and Marking Common Cathode SOT-23 SMVA1705-004LF GreenTM Marking: HY3 LS = 1.4 nH The Pb-free symbol or "LF" in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as GreenTM. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 203207C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * July 3, 2018 1 DATA SHEET * SMVA1705-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR Electrical and Mechanical Specifications The absolute maximum ratings of the SMVA1705-004LF varactor are provided in Table 2. Electrical specifications are provided in Table 3. Typical capacitance values are listed in Table 4. Typical performance characteristics of the SMVA1705-004LF varactor are illustrated in Figures 1 and 2. The SPICE model for the SMVA1705-004LF varactor is shown in Figure 3, and the associated model parameters are provided in Table 5. Table 2. SMVA1705-004LF Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units 12 V Reverse voltage VR Forward current IF 20 mA Power dissipation PDIS 250 mW Operating temperature TOP -55 +125 C Storage temperature TSTG -55 +150 C Electrostatic discharge: ESD 1000 1000 200 V V V Charged Device Model (CDM), Class 3 Human Body Model (HBM), Class 1C Machine Model (MM), Class A 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SMVA1705-004LF Electrical Specifications1 (TOP = 25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Reverse current IR VR = 8 V Capacitance CT F = 1 MHz Min Typ Max Units <0.01 20 nA 19.3 6.6 pF pF VR = 1 V VR = 4 V 17.3 5.3 18.3 6.1 CT @ 1 V/ CT @ 4 V 2.8 3.0 - 0.32 Capacitance ratio CTR Series resistance RS F = 470 MHz, VR = 1 V Breakdown voltage VBR IR = 10 A 12 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 July 3, 2018 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 203207C V DATA SHEET * SMVA1705-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR Table 4. Capacitance vs Reverse Voltage VR (V) CT (pF) 0 31.5 0.5 23.5 1.0 18.3 1.5 14.3 2.0 11.9 2.5 9.7 3.0 8.3 3.5 7.1 4.0 6.1 4.5 5.5 5.0 5.2 35 +5 30 +4 Percent of Variation (%) Capacitance (pF) Typical Performance Characteristics 25 20 15 10 5 VR = 1 V +3 VR = 2.5 V +2 +1 VR = 4 V 0 -1 -2 -3 0 0 1 2 3 4 Reverse Voltage (V) Figure 1. Capacitance vs Reverse Voltage 5 -4 -40 -20 0 +20 +40 +60 +80 Temperature (C) Figure 2. Relative Capacitance Change vs Temperature Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 203207C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * July 3, 2018 3 DATA SHEET * SMVA1705-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR PORT P_anode port = 1 IND LS L = LS RES RS R = RS DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear FC = 0.5 BV = 0 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 PORT P_Cathode port = 2 S1672 Figure 3. SPICE Model Table 5. SPICE Model Parameters CJO (pF) VJ (V) M CP (pF) RS () LS (nH) 31 3 2 0.5 0.32 0.8 Package Dimensions Package dimensions are shown in Figure 4, and tape and reel dimensions are provided in Figure 5. Package and Handling Information Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SMVA1705-004LF varactor is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 July 3, 2018 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 203207C DATA SHEET * SMVA1705-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 3 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 2 1 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8 Max. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.022 (0.55 mm) Ref. Dimensions are in inches (millimeters shown in parentheses) S1389 Figure 4. SOT-23 Package Dimensions 4.00 o1.00 Min. o1.5 + 0.1/-0 4.00 (See Note 5) 2.70 (Bo) R 0.3 Max 2.2 1.20 (Ko) 1.75 0.10 3.50 0.05 A 1.0 0.8 0.05 R 0.5 Typ. Pin 1 Indicator 8.00 + 0.3/-0.1 2.00 0.05 0.25 0.05 A 3.10 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.40 mm width. 4. Tolerance 0.10 mm. 5. Ten sprocket hole pitch cumulative tolerance: 0.2 mm. 6. All measurements are in millimeters. 7. Alternative carrier tape dimensions are: Ao = 3.3 Bo = 2.9 Ko = 1.22 S1684b Figure 5. SOT-23 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 203207B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * May 27, 2015 5 DATA SHEET * SMVA1705-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR Copyright (c) 2002-2006, 2009- 2015, 2018 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 July 3, 2018 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 203207C