#A814AY-470K=P3 - TOKO - Datasheet.Live

Meeting Your Need

1.800.PIK.TOKO

1.847.297.0070www.tokoam.com R-LOG1104A

Please read PRECAUTIONS and NOTES sections of this catalog for safe operation. This catalog contains consumer grade specifications only. Detailed technical specifications are available upon request.

TYPE D10F

For Reflow Soldering

Frequency Range: 1kHz ~ 1MHz

Inductance Range: 10 ~ 1500µH

Features

• Low profile SMD Type (5mm high)

• Suitable for large current

• Suitable for reflow soldering

• Available on tape and reel for automatic insertion

• Lead-free terminations

STANDARD PARTS SELECTION GUIDE

(1) Inductance is measured by LCR-meter 4284A (HP) or equivalent.

(2) DC resistance is measured by Digital Multimeter TR6871

(Advantest) or equivalent.

TYPE D10F

TOKO Test Rated

Part Inductance ( 1 ) Frequency DC Resistance ( 2 ) DC Current ( 3 )

Number L (µH) Tolerance (kHz) (Ω) max. (A) max.

#A814AY-100M=P3 10 ±20% 100 0.047 2.60

#A814AY-120M=P3 12 ±20% 100 0.050 2.48

#A814AY-150M=P3 15 ±20% 100 0.058 2.27

#A814AY-180M=P3 18 ±20% 100 0.067 2.15

#A814AY-220M=P3 22 ±20% 100 0.075 2.00

#A814AY-270M=P3 27 ±20% 100 0.087 1.84

#A814AY-330M=P3 33 ±20% 100 0.095 1.72

#A814AY-390M=P3 39 ±20% 100 0.12 1.58

#A814AY-470K=P3 47 ±10% 100 0.15 1.44

#A814AY-560K=P3 56 ±10% 100 0.18 1.28

#A814AY-680K=P3 68 ±10% 100 0.20 1.20

#A814AY-820K=P3 82 ±10% 100 0.23 1.09

#A814AY-101K=P3 100 ±10% 100 0.27 1.05

#A814AY-121K=P3 120 ±10% 100 0.33 0.92

#A814AY-151K=P3 150 ±10% 100 0.40 0.80

#A814AY-181K=P3 180 ±10% 100 0.53 0.73

#A814AY-221K=P3 220 ±10% 100 0.60 0.69

#A814AY-271K=P3 270 ±10% 100 0.84 0.60

#A814AY-331K=P3 330 ±10% 100 1.00 0.53

#A814AY-391K=P3 390 ±10% 100 1.09 0.49

#A814AY-471K=P3 470 ±10% 100 1.25 0.46

#A814AY-561K=P3 560 ±10% 100 1.63 0.41

#A814AY-681K=P3 680 ±10% 100 1.90 0.38

#A814AY-821K=P3 820 ±10% 100 2.44 0.34

#A814AY-102K=P3 1000 ±10% 100 2.80 0.31

#A814AY-122K=P3 1200 ±10% 100 3.67 0.27

#A814AY-152K=P3 1500 ±10% 100 4.37 0.25

Unit: mm

Fixed Inductors for Surface Mounting

TYPE

D10F

Recommended patterns:

Note: =P3 is added to each part number to indicate tape and reel packaging.

Unit: mm

(3)

Maximum allowable DC current is that which causes a 10% inductance

reduction from the initial value, or coil temperature to rise by 40°C,

whichever is smaller. (Reference ambient temperature 20°C).