3.0V SCC Series High Capacitance Cylindrical SuperCapacitors The new series of cylindrical electrochemical double-layer capacitors offers excellent pulse power handling characteristics based on the combination of very high capacitance and very low ESR. Used by themselves or in conjunction with primary or secondary batteries, they provide extended back up time, longer battery life, and provide instantaneous power pulses as needed. Offers great solutions to Hold-Up, Energy Harvesting, and Pulse Power Applications. FEATURES *Cap Values from 1F - 50F *High pulse power capability *Low ESR *Low Leakage Current *Capability to couple with battery APPLICATIONS *Camera Flash Systems *Energy Harvesting *GSM/GPRS Pulse Applications *UPS/Industrial *Wireless Alarms *Remote Metering *Scanners *Toys and Games HOW TO ORDER SCC S 30 E 106 Series SuperCap Cylindrical Diameter Q = 6.3mm R = 8mm S = 10mm T = 12.5mm U = 16mm V = 18mm Case Length Two digits represent case length in mm Voltage Code E = 3.0V Capacitance Code 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) QUALITY INSPECTION Parts are tested for Life Cycle, high temperature load life, temperature characteristics, vibration resistance, and humidity characteristics. See page 2 for more information. S TERMINATION Tolerance P = +100%/-0% S = +30%/-10% R B Lead Format R = Radial Package B = Bulk T = Tray* These SuperCapacitors are compatible with hand soldering, as well as reflow and wave soldering processes, so long as appropriate precautions are followed. See page 4 for more information. - Custom Code A1= 4mm Bent Leads* C1 = 2mm Bent Leads* *Inquire about availability OPERATING TEMPERATURE -40C to +65C @ 3.0V -40C to +85C @ 2.5V LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. 1 040219 3.0V SCC Series High Capacitance Cylindrical SuperCapacitors RATINGS & PART NUMBER REFERENCE AVX Part Number Diameter Length (mm) (mm) Rated Capacitance (F) Capacitance Tolerance Rated Voltage (V) Rated Temperature (C) DCL Max @ 72 Hrs (A) ESR Max @ 1000 Hz (m) ESR Max @ DC (m) Peak Current (A) Power Density (W/kg) Max Energy (Wh) Energy Density (Wh/kg) Radial Lead SCCQ12E105PRB 6.3 12 1 +100%/-0% 3.0/2.5* 65/85* 6 240 1500 0.60 1108 0.0013 1.92 SCCR12E105PRB 8 12 1 +100%/-0% 3.0/2.5* 65/85* 6 180 860 0.81 1322 0.0013 1.32 SCCR16E205PRB 8 16 2 +100%/-0% 3.0/2.5* 65/85* 10 100 360 1.74 2609 0.0025 2.17 SCCR20E335PRB 8 20 3.3 +100%/-0% 3.0/2.5* 65/85* 12 95 280 2.57 2660 0.0041 2.84 SCCR25E505PRB 8 25 5 +100%/-0% 3.0/2.5* 65/85* 15 85 220 3.57 2888 0.0063 3.68 SCCS20E505PRB 10 20 5 +100%/-0% 3.0/2.5* 65/85* 15 70 170 4.05 3025 0.0063 2.98 SCCS25E705PRB 10 25 7 +100%/-0% 3.0/2.5* 65/85* 24 60 150 5.12 2769 0.0088 3.37 SCCS30E106SRB 10 30 10 +30%/-10% 3.0/2.5* 65/85* 30 50 75 8.57 4645 0.0125 4.03 SCCT20E106SRB 12.5 20 10 +30%/-10% 3.0/2.5* 65/85* 30 50 75 8.57 4235 0.0125 3.68 SCCT30E156SRB 12.5 30 15 +30%/-10% 3.0/2.5* 65/85* 50 40 60 11.84 4000 0.0188 4.17 SCCU25E256SRB 16 25 25 +30%/-10% 3.0/2.5* 65/85* 60 27 50 16.67 2959 0.0313 4.28 SCCU30E356SRB 16 30 35 +30%/-10% 3.0/2.5* 65/85* 70 20 40 21.88 3103 0.0438 5.03 SCCV40E506SRB 18 40 50 +30%/-10% 3.0/2.5* 65/85* 75 18 20 37.50 4154 0.0625 4.81 *with appropriate voltage derating operating temperature can be extended to 85C QUALIFICATION TEST SUMMARY Test Test Method Parameter Limits Life Cycle Capacitors are cycled between rated voltage and half-rated voltage under constant current at +25C for 500,000 cycles Capacitance Change ESR Appearance 30% of initial spec value 2 times initial spec value No remarkable defects High Temperature Load Life Voltage: Rated Voltage Capacitance Change ESR Appearance 30% of initial spec value 2 times initial spec value No remarkable defects Capacitance Change ESR Appearance 30% of initial spec value 2 times initial spec value No remarkable defects Capacitance Change ESR Appearance 30% of initial spec value 2 times initial spec value No remarkable defects Capacitance Change ESR Appearance 30% of initial spec value 2 times initial spec value No remarkable defects Temperature: +65C Test Duration: 2,000 hours Storage Duration: 2 years Storage Temperature Characteristics No Load Temperature: +35C Amplitude: 1.5mm Vibration Resistance Frequency: 10 ~ 55Hz Direction: X, Y, Z for 2 hours each Voltage: Rated Voltage Humidity RH: 90% Temperature: +60C Test Duration: 1,500 hours 2 040219 3.0V SCC Series High Capacitance Cylindrical SuperCapacitors QUALITY AND RELIABILITY Capacitance vs. Temperature Percent of 25C Reading 200% 150% 100% 50% 0% -40C -20C 0C 20C 40C 60C 80C Percent of 25C Reading Temperature (C) 700% 600% 500% 400% 300% 200% 100% 0% -40C Leakage Current vs. Temperature -20C 0C 20C 40C 60C 80C 60C 80C Temperatue (C) Percent of 25C Reading Equivalent Series Resistance vs. Temperature 300% 250% 200% 150% 100% 50% 0% -40C -20C 0C 20C 40C Temperature (C) 3 011519 3.0V SCC Series High Capacitance Cylindrical SuperCapacitors MECHANICAL SPECIFICATIONS Radial Lead Type 1F - 50F D (mm) P (mm) d (mm) 6.3 2.3 0.6 8 3.5 0.6 10 5.0 0.6 12.5 5.5 0.6 16 7.5 0.8 18 8.0 0.8 Radial Bent Lead Type Style A1 C1 B (mm) 4 2 SOLDERING RECOMMENDATIONS When soldering SuperCapacitors to a PCB, the temperature & time that the body of the SuperCapacitor sees during soldering can have a negative effect on performance. We advise following these guidelines: * Do not immerse the SuperCapacitors in solder. Only the leads should come in contact with the solder. * Ensure that the body of the SuperCapacitor is never in contact with the molten solder, the PCB or other components during soldering. * Excessive temperatures or excessive temperature cycling during soldering may cause the safety vent to burst or the case to shrink or crack, potentially damaging the PCB or other components, and significantly reduce the life of the capacitor. contact time should be limited to less than 4 seconds. Too much exposure to terminal heat during soldering can cause heat to transfer to the body of the SuperCapacitor, potentially damaging the electrical properties of the SuperCapacitor. WAVE SOLDERING Only use wave soldering on Radial type SuperCapacitors. The PCB should be preheated only from the bottom and for less than 60 seconds, with temperature at, or below, 100C on the top side of the board for PCBs equal to or greater than 0.8 mm thick. Solder Temperature Suggested Solder Maximum Solder (C) Time (s) Time (s) 220 7 9 240 7 9 250 5 7 260 3 5 HAND SOLDERING Keep distance between the SuperCapacitor body and the tip of the soldering iron and the tip should never touch the body of the capacitor. Contact between SuperCapacitor body and soldering iron will cause extensive damage to the SuperCapacitor, and change its electrical properties. It is recommended that the soldering iron temperature should be less than 350C, and REFLOW SOLDERING Infrared or conveyor over reflow techniques can be used on these SuperCapacitors. Do not use a traditional reflow oven without clear rated reflow temperature for SuperCapacitors. 4 042219 3.0V SCC Series High Capacitance Cylindrical SuperCapacitors TEST METHODS IEC Capacitance Test Method * Capacitance is measured using a Keithley 2400 or 2602 Meter * Procedure * Charge Capacitor to Rated Voltage at room temperature * Disconnect parts from voltage to remove charging effects * Discharge cells with a constant current I determined by 4 * C * VR * Noting V1, t1, V2, t2 and performing the calculation for C Voltage (V) 30 min VR V3 ESR Drop V1 V2 Initial ESR Measurement @ 25C * Using an Agilent 4263B LCR Meter and a Kelvin connection * Measure at frequency of 1000 Hz * Measurement Voltage of 10mV DC ESR Measurement * Six steps capacity and ESRDC Test Method is used as illustrated in the figure right. * Tests are carried out by charging and discharging the capacitor for two cycles at rated voltage and half rated voltage * C = (CDC1+CDC2) / 2 * ESRDC = (ESRDC1 + ESRDC2) / 2 Where: CDC1 = I2*(t5-t4)/(V3-V4) CDC2 = I2*(t11-t10)/V9-V10) ESRDC1 = (V5-V4)/I2 ESRDC2 = (V11-V10)/I2 I1 = I2 = 75mA/F I1 VR t1 t2 Times (s) V1 Cycle 1 V2 V7 I1 V3 Cycle 2 V8 V9 Step 2 Step 2 Step 4 I - Discharge Current [mA], 4 * C * VR VR - Rated Voltage V1 - Initial Test Voltage, 80% of VR V2 - Final Test Voltage, 40% of VR t1 - Initial Test time t2 - Final Test time C = I * (t2 - t1) / (V1 - V2) Step 4 Step 3 Step 6 Step 6 Step 3 V5 Step 1 Step 1 V6 V4 V11 V10 Step 5 Step 5 DCL Measurement @ 25C * DCL is measured using a Multimeter with high internal impedance across a resistor * Charge Capacitor to Rated Voltage at room temperature for 72 Hours * Disconnect parts from Voltage by opening switch 1 (Stabilize for 10 Min) * Measure Voltage across a known Valued Resistor (1K Ohm) * Calculate DCL = V/R I2 0 t1 t2 t3 t4 I2 t5 t6 t7 t8 t9 t10 t11 t12 Maximum Operating Current * This is the maximum current when capacitor temperature rise of the capacitor during its operation is less than 15C Maximum Peak Current * This is the maximum current in less than 1 sec Multimeter + DC Power Supply + - - 1k Watt Density * Watt Density = (0.12*V / RDC) / mass Energy Density * Energy density = (1/2 CV) / (3600*mass) 1 5 050619 3.0V SCC Series High Capacitance Cylindrical SuperCapacitors POLARITY / REVERSE VOLTAGE For product consistency and optimum performance, it is recommended that the capacitor be connected with polarity indicated. Reversing polarity could result in permanent damage to the circuit including much higher leakage current for a short duration of time and the life time of the supercapacitors will be reduced. LIFE TIME AND TEMPERATURE PERFORMANCE The life of a SuperCapacitor is impacted by a combination of operating voltage and the operating temperature according to the following equation: time to failure, t Vn * exp (-Q / k*T) ..............(1) where V is the voltage of operation, Q is the activation energy in electron volts (eV), k is the Boltzmann's constant in eV and T is the operating temperature in K (where K is in degrees Kelvin). Typical values for the voltage exponent, n, is between 2.5 - 3.5, and Q is between 1.0 - 1.2 eV in the normal operating temperature range of 40 to 65C. The industry standard for SuperCapacitor end of life is when the equivalent series resistance, ESR, increases to 200% of the original value and the capacitance drops by 30%. Typically a super-capacitance shows an initial change in the ESR value and then levels off. If the capacitors are exposed to excessive temperatures the ESR will show a continuous degradation. In the extreme case, if the temperatures or voltages are substantially higher, than the rated voltage, this will lead to cell leakage or gas leakage and the product will show a faster change in the ESR which may increase to many times the original value. Expected Lifetime at Various Voltages SCC Series, 3.0V Rated 90 100%Vrated (3.0V) 90%Vrated 80%Vrated 70%Vrated 80 Temperature (C) 70 60 50 40 30 20 10 0 0.1 1.0 10.0100.0 MTTF (years) Expected Lifetime at Various Voltages SCC Series, 2.5V Rated 90 100%Vrated (2.5V) 90%Vrated 80%Vrated 70%Vrated 80 Temperature (C) 70 60 50 40 30 20 10 0 0.1 1.0 10.0 MTTF (years) 6 042619 100.0 3.0V SCC Series High Capacitance Cylindrical SuperCapacitors SAFETY RECOMMENDATIONS Warnings Regulatory *To Avoid Short Circuit, after usage or test, SuperCapacitor voltage needs to discharge to 0.1V *Do not Apply Overvoltage, Reverse Charge, Burn or Heat Higher than 150C, explosion-proof valve may break open *Do not Press, Damage or disassemble the SuperCapacitor, housing could heat to high temperature causing Burns *If you observe Overheating or Burning Smell from the capacitor disconnect Power immediately, and do not touch * UL 810A * RoHS Compliant * Reach Compliant / Halogen Free Storage * Capacitors may be stored within the operating temperature range of the capacitor * Lower storage temperature is preferred as it extends the shelf life of the capacitor * Do Not Store the SuperCapacitors in the following Environments * High Temperature / High Humidity environments >40C / 70% RH * Direct Sunlight * In direct contact with water, salt oil or othaer chemicals * In direct contact with corrosive materials, acids, alkalis, or toxic gases * Dusty environment * In environment with shock and vibration conditions Emergency Applications If Housing is Leaking: *Skin Contact: Use soap and water thoroughly to wash the area of the skin *Eye Contact: Flush with flowing water or saline, and immediately seek medical treatment *Ingestion: Immediately wash with water and seek medical treatment Transportation Not subjected to US DOT or IATA regulations UN3499, <10Wh, Non-Hazardous Goods International shipping description - "Electronic Products - Capacitor" Licensed by CAP-XX 7 011519