DSC1001 1.8~3.3V Low-Power Precision CMOS Oscillator General Description Features The DSC1001 is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages and temperatures. The device operates from 1 to 150MHz with supply voltages between 1.8 to 3.3 Volts and temperature ranges up to -40C to 105C. The DSC1001 incorporates an all silicon resonator that is extremely robust and nearly immune to stress related fractures, common to crystal based oscillators. Without sacrificing the performance and stability required of today's systems, a crystal-less design allows for a higher level of reliability, making the DSC1001 ideal for rugged, industrial, and portable applications where stress, shock, and vibration can damage quartz crystal based systems. Available in industry standard packages, the DSC1001 can be "dropped-in" to the same PCB footprint as standard crystal oscillators. Benefits Block Diagram VDD Frequency Range: 1 to 150MHz Exceptional Stability over Temperature o 10 PPM, 25 PPM, 50 PPM Operating voltage o 1.7 to 3.6V Operating Temperature Range o Ext. Industrial -40C to 105C o Industrial -40C to 85C o Ext. Commercial -20C to 70C o Commercial 0C to 70C Low Operating and Standby Current o 5mA Operating (40MHz) o 15uA Standby Ultra Miniature Footprint o 2.5 x 2.0 x 0.85 mm o 3.2 x 2.5 x 0.85 mm o 5.0 x 3.2 x 0.85 mm o 7.0 x 5.0 x 0.85 mm MIL-STD 883 Shock and Vibration Resistant Pb Free, RoHS, Reach SVHC Compliant AEC-Q100 Reliability Qualified Pin for pin "drop in" replacement for industry standard oscillators Semiconductor level reliability, significantly higher than quartz Short mass production lead-times Longer Battery Life / Reduced Power Compact Plastic package Cost Effective Output Applications Resonator VCO PFD Frac-N PLL Standby# Mobile Applications Consumer Electronics Portable Electronics DVR, CCTV, Surveillance Cameras Low Profile Applications Industrial Applications GND (pin1) _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 1 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Absolute Maximum Ratings1 Item Min Max Unit Input Voltage -0.3 VDD+0.3 V Junction Temp - +150 C Storage Temp -55 +150 C Soldering Temp - +260 C ESD HBM - Ordering Code Condition DSC1001 - 032.0000 T Family 40 sec max. Package, Temp & Stability V Tape/ Reel Output Freq 1.0 to 150MHz 4000 MM CDM CE1 200 1500 * See Ordering Information for details Recommended Operating Conditions Parameter Symbol Range Supply Voltage VDD 1.7 - 3.6V Output Load ZL R>10K, C15pF Operating Temperature Option 1 Option 2 Option 3 Option 4 T -40 to +105 C -40 to +85 C -20 to +70 C 0 to +70 C Specifications (VDD = 1.8 to 3.3v) TA=850C unless otherwise specified Parameter Symbol Condition Min Frequency f0 Single Frequency 1 Frequency Tolerance f Aging f Supply Current, standby Typ Max Unit 150 MHz 10,25,50 ppm 1 year @25C 5 ppm IDD T=25C 15 uA Output Logic Levels Output logic high Output logic low VOH VOL -4mA 4mA 0.2*VDD Volts Output Startup Time2 tSU T=25C 1.0 1.3 ms Output Disable Time tDA 20 100 ns Includes frequency variations due to initial tolerance, temperature and power supply voltage 0.8*VDD - Output Duty Cycle SYM 45 55 % Input Logic Levels Input logic high Input logic low VIH VIL 0.75*VDD - 0.25* VDD Volts _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 2 MK-Q-B-P-D-050610-01-9 DSC1001 1.8~3.3V Low-Power Precision CMOS Oscillator VDD = 1.8v Parameter Supply Current, no load Symbol IDD Condition 1MHz CL=0p 27MHz RL= 70MHz T=25C 150MHz Min Typ 6.0 6.5 7.2 8.3 Max 6.3 6.9 7.5 9.1 3 3 Output Transition time Rise Time Fall Time tR tF CL=15pF; T=25C 20%/80%*VDD 1.8 1.0 Jitter, Max Cycle to Cycle JCC F = 100MHz3 60 Unit mA ns Ps VDD = 2.5v Parameter Supply Current, no load Symbol IDD Condition 1MHz CL=0p 27MHz RL= 70MHz T=25C 150MHz Min Typ 6.0 6.7 7.7 9.6 Max 6.3 7.0 8.1 10.6 2 2 Output Transition time Rise Time Fall Time tR tF CL=15pF; T=25C 20%/80%*VDD 1.0 0.9 Jitter, Max Cycle to Cycle JCC F = 100MHz3 50 Unit mA ns ps VDD = 3.3v Parameter Supply Current, no load Output Transition time Rise Time Fall Time Jitter, Max Cycle to Cycle Symbol IDD tR tF JCC Condition 1MHz CL=0p 27MHz RL= 70MHz T=25C 150MHz CL=15pF; T=25C 20%/80%*VDD F = 100MHz3 Min Typ 6.0 6.8 8.2 10.8 Max 6.3 7.2 8.7 12.2 1.0 0.9 50 2 2 Unit mA ns ps Notes: 1. Absolute maximum ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated beyond these limits. 2. tSU is time to stable output frequency after VDD is applied. tSU and tEN (after EN is asserted) are identical values. 3. Measured over 50k clock cycles. _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 3 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Nominal Performance Characteristics Supply Current Supply Current 16 Vdd = 3.65V Ta = 25C 20 0pF 8pF 15pF Supply Current (mA) Supply Current (mA) 24 16 12 8 4 0 Vdd = 1.65V Ta = 25C 12 15pF 8 4 50 100 Frequency (MHz) 150 0 50 100 Frequency (MHz) Rise Time 150 Fall Time 2 2 Vdd = 3.3V 1.5 -40C 25C 85C Vdd = 3.3V 1.5 Fall Time (ns) Rise Time (ns) 8pF 0 0 1 0.5 -40C 25C 85C 1 0.5 0 0 0 50 100 Frequency (MHz) 0 150 50 100 Frequency (MHz) 150 Fall Time Rise Time 2 2 Vdd = 1.8V -40C 25C 85C Vdd = 1.8V 1.5 Fall Time (ns) 1.5 Rise Time (ns) 0pF 1 0.5 -40C 25C 85C 1 0.5 0 0 0 50 100 Frequency (MHz) 150 0 50 100 Frequency (MHz) 150 _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 4 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Output Waveform tR tF VOH Output VOL tEN 1/fo tDA VIH Standby# VIL Standby Function Standby# Output (pin 1) (pin 3) Hi Level Output ON Open (no connect) Output ON Low Level High Impedance Test Circuit IDD VDD 0.01uF 4 3 1 2 15pF *VSD *VSD = Standby# Logic Level Input _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 5 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Board Layout (recommended) Solder Reflow Profile 20-40 Sec Se 3C / 217C 200C 60-150 Sec S 6C/ ax cM Se 3C / 25C 60-180 Sec Pre heat 8 min max Reflow x. 150C Ma . ec Temperature (C) cM ax . 260C Cool MSL 1 @ 260C refer to JSTD-020C Ramp-Up Rate (200C to Peak Temp) 3C/Sec Max. Preheat Time 150C to 200C 60-180 Sec Time maintained above 217C 60-150 Sec 255-260C Peak Temperature Time within 5C of actual Peak 20-40 Sec 6C/Sec Max. Ramp-Down Rate Time 25C to Peak Temperature 8 min Max. Time _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 6 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Package Dimensions 7.0 x 5.0 mm Plastic Package External Dimensions 7.00.10 [0.2760.004] #4 Recommended Land Pattern* 5.08 [0.200] 5.08 [0.2] #3 #3 #4 2.6 [0.102] 2.6 [0.102] 3.5 [0.138] 0.2 [0.008] 2.2 [0.087] #2 #1 #2 5.00.10 [0.1970.004] 1.4 [0.055] 0.2 [0.008] #1 0.850.05 [0.0330.002] o o o o o 1.4 [0.055] 0.2 [0.008] 1.4 [0.055] 1.2 [0.047] No. 1 2 3 4 o Pin Terminal Standby# GND Output VDD *Note: The center pad is not connected internally and should be left unconnected or tied to GND. units: mm [inch] 5.0 x 3.2 mm Plastic Package External Dimensions 2.54 [0.100] 2.54 [0.100] 50.10 [0.1970.004] #4 Recommended Land Pattern #3 #4 #3 1.2 [0.047] 2.1 [0.083] 0.2 [0.008] 1.1 [0.043] 0.1 [0.004] #1 #2 3.20.10 [0.1260.004] #2 1.2 [0.047] #1 0.1 [0.004] 1.2 [0.047] 0.9 [0.035] 0.850.05 [0.0330.002] No. 1 2 3 4 Pin Terminal Standby# GND Output VDD units: mm [inch] _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 7 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator 3.2 x 2.5 mm Plastic Package Recommended Land Pattern External Dimensions 3.20.05 [0.1260.002] #4 2.1 [0.083] 2.1 [0.083] #3 #3 #4 0.9 [0.035] 0.9 [.035] 1.0 [0.039] CO.25 #1 #2 #2 0.90.05 [0.0350.002] #1 0.2 [0.008] 2.50.05 [0.0980.002] 0.9 [0.035] 0.80.1 [0.0310.004] No. 1 2 3 4 0.850.05 [0.0330.002] Pin Terminal Standby# GND Output VDD units: mm [inch] 2.5 x 2.0 mm Plastic Package External Dimensions 2.50.05 [0.0980.002] #4 Recommended Land Pattern 1.65 [0.065] 1.65 [0.065] #3 #3 #4 0.7 [0.028] 0.7 [0.028] 0.85 [0.033] CO.25 #1 #2 2.00.05 [0.0790.002] #2 0.650.05 [0.0260.002] #1 0.2 [0.008] 0.65 [0.026] 0.650.10 [0.0260.004] 0.850.05 [0.0330.002] No .1 2 3 4 Pin Terminal Standby# GND Output VDD units: mm [inch] _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 8 MK-Q-B-P-D-050610-01-9 1.8~3.3V DSC1001 Low-Power Precision CMOS Oscillator Ordering Information DSC1001 PTS - xxx.xxxx T PART NUMBERING GUIDE Package (Plastic QFN) P=A: P=B: P=C: P=D: 7.0x5.0mm 5.0x3.2mm 3.2x2.5mm 2.5x2.0mm Temperature T=C: 0o ~ +70o C T=E: -20o ~ +70o C T=I: -40o ~ +85o C T=L: -40o ~ +105o C Stability Frequency S=1: 50ppm S=2: 25ppm S=5: 10ppm XXX.XXXX - Packing Option Blank: Tubes T: Tape & Reel Example: DSC1001CE1-123.0000T The example part number above is a 123.0000MHz oscillator in Plastic 3.2x2.5mm package, with 50ppm stability over an operating temperature of -20 to +70oC, shipped in Tape and Reel. Disclaimer: Discera makes no warranty of any kind, express or implied, with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Discera reserves the right to make changes without further notice to materials described herein. Discera does not assume any liability arising from the application or use of any product or circuit described herein. Discera does not authorize its products for use a critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Discera's product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Discera against all charges. DISCERA, Inc. Phone: +1 (408) 432-8600 1961 Concourse Drive, Fax: +1 (408) 432-8609 San Jose, California 95131 Email: sales@discera.com USA www.discera.com _____________________________________________________________________________________________________________________________ _________________ DSC1001 Page 9 MK-Q-B-P-D-050610-01-9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Micrel: DSC1001AL1-026.0000T DSC1001BI5-100.0000T DSC1001BI1-001.8432T DSC1001BI1-060.0000T DSC1001CI2073.7280T DSC1001CL1-008.0000T DSC1001DL5-012.2880T DSC1001DL5-048.0000T DSC1001DL5-020.0000T DSC1001DL5-100.0000T DSC1001DL5-133.3330T DSC1001DI5-012.2880T DSC1001DI5-020.0000T DSC1001DL5010.0000T DSC1001DL5-050.0000T DSC1001DL5-125.0000T DSC1001DI5-050.0000T DSC1001DI2-029.5000T DSC1001DI2-038.4000 DSC1001DI5-029.4912T DSC1001DI2-108.0000T DSC1001DI2-125.0000T DSC1001DI5010.0000T DSC1001DI1-009.8304T DSC1001DI1-024.5760T DSC1001DI1-026.0000T DSC1001DI1-060.0000 DSC1001DI1-100.0000T DSC1001DI2-018.0000 DSC1001CL2-033.3000T DSC1001CL5-012.0000T DSC1001CL5024.5760T DSC1001CL5-125.0000T DSC1001DE1-054.0000T DSC1001DI1-008.0000T DSC1001CI5-016.0000T DSC1001CI5-018.4320T DSC1001CI5-019.2000T DSC1001CI5-125.0000T DSC1001CL2-012.0000 DSC1001CL2027.0000T DSC1001CI1-024.0000 DSC1001CI1-024.0000T DSC1001CI2-038.8800T DSC1001CI2-054.0000T DSC1001CI2-065.5500T DSC1001CI2-083.2500T DSC1001CE1-004.8000T DSC1001CE1-012.2880T DSC1001CE1-020.8300T DSC1001CE2-024.0000T DSC1001CE2-033.0000T DSC1001CE2-037.1250T DSC1001AI5-048.0000T DSC1001DI2-048.0000T DSC1001DI5-002.4576 DSC1001DI5-004.0000T DSC1001DI5008.1920T DSC1001DL2-030.0000T DSC1001AI2-013.5000T DSC1001AI2-015.0000T DSC1001AI2-027.1200T DSC1001AI2-032.7680T DSC1001AI2-098.3040T DSC1001AI5-025.0000T DSC1001BL5-012.0000T DSC1001AC2025.0000T DSC1001AE2-024.0000T DSC1001AE2-054.0000T DSC1001AI1-025.0000T DSC1001AI2-006.0000T DSC1001BI2-001.8432T DSC1001BI2-020.0000T DSC1001BI2-040.0000T DSC1001BI2-044.0000T DSC1001BI2054.0000T DSC1001BI5-040.0000T DSC1001BE1-048.0000T DSC1001BE2-012.0000 DSC1001BI1-010.0000T DSC1001BI1-014.7456T DSC1001BI1-025.0000T DSC1001BI1-030.0000T DSC1001AI5-100.0000T DSC1001AI5125.0060T DSC1001AL2-050.0000T DSC1001AL5-008.0000T DSC1001AL5-024.0000T DSC1001BE1-016.0000T DSC1001DI5-026.0000T DSC1001CI2-024.5760 DSC1001CI2-026.0000T DSC1001CI2-027.0000T DSC1001CI2033.3333T DSC1001AI5-080.0000T DSC1001DI1-032.0000T DSC1001DI2-064.5000 DSC1001DI2-074.2500T DSC1001DI5-006.0000T DSC1001DI5-008.0174T