CCS 2000 Series Card Edge Connector .125" X .250" Contact Spacing, Switching Contacts Specifications Features Insulator Material: Glass filled polyester, type PBT, 94 V-O, UL Rated. Contact Material: Phosphor Bronze Alloy Contact Plating: Gold and/or Tin over .000050" Nickel, (See Contact Plating Options). Current Rating: 3 amp at 30C Contact Resistance: Contact to Daughter Card: 10 m W max. Compliant section to P.T.H.: 2 m W max. Insulation Resistance: 5000 M W min. Dielectric Withstand Voltage: 1500 V AC Daughter Board Insertion Force: 16 oz max. per contact pair when tested with a .071" thick gage. Daughter Board Withdrawal Force: 1 oz min. per contact pair when tested with a .054" thick gage. Compliant Section Insertion Force: 40 lbs max per contact Compliant Section Withdrawal Force: 10 lbs min. per contact Recommended Board Thickness: .093"+ Recommended PCB Layout Page A-33 Operating Temperature: -54BC to +125BC * Flat Plate Installation eliminates the need for secondary operation tooling which can damage the connector. * Extra large chamfered entry * Conforms to Bell-core spec TR-TSY-00078 * Extended card scoops available * Replaceable contacts * Molded in polarization available between contact, or on contact position. * De-population of contacts per customer specification. * Available in selective gold plate at contact point * Many other custom options available, including, but not limited to: * Single or Both Ends Open * Selectively Loaded with Standard Signal Contacts Recommended Hole Size .040 .003 [1.02] .0453 .001 [1.15] .0040 [.10] min. .0003 [.008] min. R C .001-.003 [.03-.08] Dimensions are in inch [mm] R Recognized under the recognized component Program of Underwriters Laboratories, Inc. File Numbers: E146967 and E176234 Drilled Hole Diameter Plating Thickness .0453.001 [1.15] .001-.003 [.03-.08] Copper Tin / Lead .0003 [.008]min. NO. OF POS. / CONTACTS 06/12 10/20 12/24 16/32 18/36 20/40 22/44 25/50 28/56 30/60 36/72 38/76 40/80 43/86 50/100 51/102 56/112 60/120 Pad Diameter After Plating .040.003 [1.02] .065 [1.65] B C 0.875 [22.23] 1.375 [34.93] 1.625 [41.28] 2.125 [53.98] 2.375 [60.33] 2.625 [66.68] 2.875 [73.03] 3.250 [82.55] 3.625 [92.08] 3.875 [98.43] 4.625 [117.48] 4.875 [123.83] 5.125 [130.18] 5.500 [139.70] 6.375 [161.93] 6.500 [165.10] 7.125 [180.98] 7.625 [193.68] 0.625 [15.88] 1.125 [28.58] 1.375 [34.93] 1.875 [47.63] 2.125 [53.98] 2.375 [60.33] 2.625 [66.68] 3.000 [76.20] 3.375 [85.73] 3.625 [92.08] 4.375 [111.13] 4.625 [117.48] 4.875 [123.83] 5.250 [133.35] 6.125 [155.58] 6.250 [158.75] 6.875 [174.63] 7.375 [187.33] A 1.011 [25.68] 1.511 [38.38] 1.761 [44.73] 2.261 [57.43] 2.511 [63.78] 2.761 [70.13] 3.011 [76.48] 3.386 [86.00] 3.761 [95.53] 4.011 [101.88] 4.761 [120.93] 5.011 [127.28] 5.261 [133.63] 5.626 [143.15] 6.511 [165.38] 6.636 [168.55] 7.261 [184.43] 7.761 [197.13] Hole Diameter For reference only, can go 1 through 60 positions. WWW.ECSCONN.COM Dimensions are in inch [mm] .125" x .250" Contact Spacing, Switching Contcts A .010[0.25] B .005[0.13] C .420 [10.67] .125 [3.18] typ. ACCEPTS .054 - .071 [1.37 - 1.80] P.C. BOARD .125 [3.18] typ. .150 [3.81] .510 [12.95] .645 [16.38] .360 [9.14] .125 [3.18] TAIL LENGTH .010[0.25] P.C. BOARD .250 [6.35] Dimensions are in inch [mm] PART NUMBERING 20 XX S1 1X XX 640 SERIES CODE .125" x .250" Contact Spacing PLATING NO. CONTACT PAIRS 01 - 60 50" Nickel Underplate TAIL LENGTH 1= .190 2= .375 3= .465 4= .625 5= .710 [4.83] [9.53] [11.81] [15.88] [18.03] CONTACT 10 = 10" Au 20 = 15" Au 30 = 30" Au 40 = 10" Au 50 = 15" Au 60 = 30" Au CONSULT FACTORY FOR CONNECTORS BUILT TO YOUR SPECIFICATION WWW.ECSCONN.COM TAIL 100" Sn 100" Sn 100" Sn 5" Au 5" Au 5" Au