3MTM DIN R-Form Plug Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series * Early mate late break (EMLB) grounding contacts for hot swapping * Select load capability * Expanded pin counts * Optional press-fit or solder tail termination * Mates with C-form and R-form sockets * Optional retention clip * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3M.com/Interconnects for compliance information (RIA E1 & C1 apply) Date Modified: February 2, 2010 TS-2307-E Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Gray Contact: Material: Copper Alloy Plating: Underplating: 50 " Min.Nickel Wiping Area: See Ordering Information Termination: See Ordering Information Electrical Current Rating: 3.0A at 30C T-rise above Ambient Contact Resistance: 20 m Insulation Resistance: 1,000 M, 100VDC Withstanding Voltage: 1,000 VAC for 1 minute Environmental Temperature Rating: -55C to 125C Process Temperature Rating: Maximum Insulator Temperature 191C (solder wave process only) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN R-Form Plug Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series Table 1 Contact Quantity Part Number A B D E 16 DIN-016RPA-XXX-XXXX 54.40 [2.142] 44.60 [1.756] 50.00 [1.969] 38.10 [1.500] 32 DIN-032RPB-XXX-XXXX 54.40 [2.142] 44.60 [1.756] 50.00 [1.969] 38.10 [1.500] 48 DIN-048RPC-XXX-XXXX 54.40 [2.142] 44.60 [1.756] 50.00 [1.969] 38.10 [1.500] 32 DIN-032RPD-XXX-XXXX 54.40 [2.142] 44.60 [1.756] 50.00 [1.969] 38.10 [1.500] 16 DIN-016RPE-XXX-XXXX 54.40 [2.142] 44.60 [1.756] 50.00 [1.969] 38.10 [1.500] 78.74 [3.100] 32 DIN-032RPA-XXX-XXXX 95.00 [3.740] 85.20 [3.354] 90.00 [3.543] 64 DIN-064RPB-XXX-XXXX 95.00 [3.740] 85.20 [3.354] 90.00 [3.543] 78.74 [3.100] 96 DIN-096RPC-XXX-XXXX 95.00 [3.740] 85.20 [3.354] 90.00 [3.543] 78.74 [3.100] 78.74 [3.100] 64 DIN-064RPD-XXX-XXXX 95.00 [3.740] 85.20 [3.354] 90.00 [3.543] 32 DIN-032RPE-XXX-XXXX 95.00 [3.740] 85.20 [3.354] 90.00 [3.543] 78.74 [3.100] 40 DIN-040RPA-XXX-XXXX 115.40 [4.543] 105.52 [4.154] 110.32 [4.343] 99.06 [3.900] 80 DIN-080RPB-XXX-XXXX 115.40 [4.543] 105.52 [4.154] 110.32 [4.343] 99.06 [3.900] 120 DIN-120RPC-XXX-XXXX 115.40 [4.543] 105.52 [4.154] 110.32 [4.343] 99.06 [3.900] 80 DIN-080RPD-XXX-XXXX 115.40 [4.543] 105.52 [4.154] 110.32 [4.343] 99.06 [3.900] 40 DIN-040RPE-XXX-XXXX 115.40 [4.543] 105.52 [4.154] 110.32 [4.343] 99.06 [3.900] 11.10 [.437] 11.60 [.457] 2.90 [.114] 4.90 0.10 [.193] C 2.54 [.100] 5.08 [.200] C PRESS-FIT TAILS SOLDER TAILS A D B 5.08 [.200] POSITION A1 POSITION B1 POSITION C1 0.30 [.012] 2-O2.80 [O.110] E 1.00 [.039] mm [inch] Tolerance Unless Noted mm X. .X .XX 0.50 0.25 0.15 [ ] Dimension for Reference Only 3.80 (.150) R1 with Retention Clip 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com TS-2307-E Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN R-Form Plug Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series O0.94-1.09 PLATED THROUGH HOLE [.037-.043] 2.54 [.100] 2 1 0.30 [.012] a b c 2.54 [.100] 5.08 [.200] O2.8-2.9 [.110-.114] E D RECOMMENDED PCB LAYOUT Ordering Information DIN - XXXRP X - XXX - XX Contact Quantity SEE TABLE 1 A = A Row only (see note) B = Rows A & C Filled C = Rows A, B & C Filled D = Rows A & B Filled E = B Row only (see note) Plating Options: SH =1 - 3 " Gold on Contact 120 - 200 " Matte Tin on Terminal FJ =10 - 20 " Gold on Contact 120 - 200 " Matte Tin on Terminal KR =30 - 40 " Gold on Contact 120 - 200 " Matte Tin on Terminal HM =3 " Gold on Contact, 7 " Min. PdNi 120 - 200 " Matte Tin on Terminal KV = 30 " Gold on contact area, 1 - 3 " Gold on Board Termination Termination Options: SEE TABLE 2 TABLE 2 SOLDER TERMINATION OPTION NO. DIM "C" mm ( in) Comment R1 3.75 (.148) with retention S1 3.75 (.148) no retention W 14.70 (.579) no retention PRESS-FIT TERMINATION OPTION NO. DPS 5.00 (.197) DPW1 13.25 (.522) Note: A and E options are currently not covered in UL File No. E68080. * This diagram serves only for Part Number descriptive definitions. PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS. 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com TS-2307-E Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.