Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 APPLICABILITY LIST: Model EVK2 EVK2-M2MAIR GM862 INTERFACE Part Number 3990150474 3990150502 3990250670 Engine Mother Board Mother Board + m2mAIR SIM GM862 GE863-PY INTERFACE GE863-GPS INTERFACE GE863-SIM INTERFACE 3990250684 3990250696 3990250703 GE863-PY GE863-GPS GE863-SIM GE864-PY INTERFACE GE864-QUAD V2 INTERFACE GE864-DUAL V2 INTERFACE GE864-QUAD AUTOMOTIVE V2 INTERFACE GE864-QUAD ATEX V2 INTERFACE GE864-QUAD SIM V2 INTERFACE 3990250672 3990250777 3990250778 3990250773 3990250772 3990250771 3990250820 3990250821 3990250822 GE864-PY GE864-QUAD V2 GE864-DUAL V2 GE864-QUAD AUTOMOTIVE V2 GE864-QUAD ATEX V2 GE864-QUAD SIM V2 GC864 INTERFACE GC864-QUAD-C2 INTERFACE 3990250680 3990250683 GC864 GC864-QUAD-C2 GE865-QUAD INTERFACE GE865/SE867-AGPS INTERFACE GE865/JF2 INTERFACE GL865/JN3 INTERFACE GL865-QUAD INTERFACE GL865-DUAL INTERFACE 3990250766 3990250814 3990250868 3990250954 3990250812 3990250783 GE865-QUAD GE865-QUAD GE865-QUAD GL865-QUAD GL865-QUAD GL865-DUAL GL868-DUAL INTERFACE 3990250790 GL868-DUAL UC864 INTERFACE 4990150470 UC864 HE863-EUR INTERFACE HE863-EUG INTERFACE 3990250797 3990250798 HE863 HE863 GE864-GPS INTERFACE GE864-GPS Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 2 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 HE863-NAD INTERFACE HE863-NAR INTERFACE HE863-NAG INTERFACE HE863-AUR INTERFACE HE863-AUG INTERFACE 3990250799 3990250800 3990250801 3990250803 3990250804 HE863 HE863 HE863 HE863 HE863 HE910 INTERFACE 3990250845 HE910 UE910-EUR INTERFACE UE910-NAR INTERFACE 3990250918 3990250919 UE910-EUR UE910-NAR GE910 INTERFACE GE910-GNSS INTERFACE GE910-QUAD V3 INTERFACE 3990250882 3990250941 3990251006 GE910 GE910-GNSS GE910-QUAD V3 DE910 INTERFACE 3990250886 DE910 CE910 INTERFACE 3990250887 CE910 GL865-DUAL V3 1.8V INTERFACE 3990250948 GL865-DUAL V3 LE920-EU INTERFACE LE920-NA INTERFACE 3990251000 3990250999 LE920-EU LE920-NA HE920-EU INTERFACE HE920-NA INTERFACE 3990250966 3990250967 HE920-EU HE920-NA HE910 V2-EUG INTERFACE HE910 V2-NAG INTERFACE 3990250977 3990250978 HE910 V2-EUG HE910 V2-NAG UE910-EU V2 INTERFACE UE910-NA V2 INTERFACE 3990250989 3990250988 UE910-EU V2 UE910_NA V2 CL865-DUAL INTERFACE 3990251051 CL865-DUAL GE866-QUAD INTERFACE 3990251048 GE866-QUAD UL865-EUR INTERFACE UL865-NAR INTERFACE 3990250961 3990250962 UL865-EUR UL865-NAR LE910-NAG INTERFACE LE910-NVG INTERFACE LE910-SVG INTERFACE LE910-EUG INTERFACE 3990251036 3990251037 3990251087 3990251061 LE910-NAG LE910-NVG LE910-SVG LE910-EUG Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 3 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. Copyrights This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product. Computer Software Copyrights The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 4 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. Usage and Disclosure Restrictions License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit High Risk Materials Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. Trademarks TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners. Copyright (c) Telit Communications S.p.A. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 5 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Contents 1. Introduction ............................................................................................................................. 18 1.1. Scope ....................................................................................................................................................18 1.2. Audience ..............................................................................................................................................18 1.3. Contact Information, Support...........................................................................................................18 1.4. Text Conventions ................................................................................................................................19 1.5. Related Documents .............................................................................................................................19 1.6. Content of the kit ................................................................................................................................20 2. 2.1. 2.2. Description ............................................................................................................................... 21 PCB characteristics ............................................................................................................................22 Mechanical characteristics of the assembled PCBs .........................................................................23 2.2.1. 2.2.2. 2.2.3. 2.2.4. 2.2.5. 2.2.6. 2.2.7. 2.2.8. 2.2.9. 2.2.10. 2.2.11. 2.2.12. 2.2.13. 2.2.14. 2.2.15. 2.2.16. 2.2.17. 2.2.18. 2.2.19. 2.2.20. 2.2.21. 2.2.22. 2.2.23. 2.2.24. 2.2.25. 2.2.26. 2.2.27. 2.2.28. Mother Board CS1139B .................................................................................................................... 23 GM862 Interface CS1150B .................................................................................................................. 23 GE863 Interface CS1151A ................................................................................................................... 23 GE864 Interface CS1152B ................................................................................................................... 23 GE864-GPS Interface CS1439B........................................................................................................... 23 GC864 Interface CS1203B ...................................................................................................................... 24 GC864-C2 Interface CS1231X ................................................................................................................ 24 GE865 Interface CS1324A ...................................................................................................................... 24 GE865/SE867-AGPS Interface CS1433 ................................................................................................. 24 GE865/JF2 Interface CS1521 ................................................................................................................. 24 GL865 Interface CS1431A ................................................................................................................... 24 UC864-CC864 Interface KS0101C ......................................................................................................... 25 HE910 Interface CS1467C ...................................................................................................................... 25 UE910 Interface CS1467D ...................................................................................................................... 25 GE910 Interface CS1467D ...................................................................................................................... 25 GE910-GNSS Interface CS1467F ........................................................................................................... 25 GE910-QUAD V3 Interface CS1467F .................................................................................................... 25 DE910 Interface CS1467D ...................................................................................................................... 25 CE910 Interface CS1467D ...................................................................................................................... 25 GL865 V3 Interface CS1531B ................................................................................................................ 26 LE920 Interface KS0145B ...................................................................................................................... 26 HE920 Interface KS0145B ...................................................................................................................... 26 HE910 V2 Interface CS1467D ................................................................................................................ 26 UE910 V2 Interface CS1467D ................................................................................................................ 26 CL865 Interface CS1531B ...................................................................................................................... 26 GE866-QUAD Interface CS1582 ............................................................................................................ 26 UL865 Interface CS1531B ...................................................................................................................... 27 LE910 Interface CS1467F ....................................................................................................................... 27 3. Startup procedure ................................................................................................................... 28 4. Insertion of the Interface Boards........................................................................................... 29 5. Power supply setting ............................................................................................................... 30 5.1. Fixed DC source..................................................................................................................................30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 6 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 5.2. Variable DC source ............................................................................................................................31 5.2.1. 5.3. 5.4. Li-Ion Battery pack and Charger .....................................................................................................32 Application Notes ...............................................................................................................................33 5.4.1. 5.4.2. 6. 6.1. 7. 7.1. Serial Port Setup .................................................................................................................................35 Audio Section ........................................................................................................................... 36 Overview .............................................................................................................................................36 History ..................................................................................................................................................... 36 Actual...................................................................................................................................................37 7.2.1. 7.3. Li-Ion Battery Pack .................................................................................................................................. 33 About Current Charger ............................................................................................................................ 33 Serial interface ........................................................................................................................ 34 7.1.1. 7.2. Coaxial Plug ............................................................................................................................................. 32 The choice ................................................................................................................................................ 37 Differential and Single Ended ...........................................................................................................37 7.3.1. 7.3.2. 7.3.3. Concepts................................................................................................................................................... 37 Benefits and disadvantages ...................................................................................................................... 38 Settings..................................................................................................................................................... 39 8. AF Amplifiers Setting ............................................................................................................. 40 9. Audio outputs .......................................................................................................................... 41 9.1. 9.2. Low AF Power Mode .........................................................................................................................41 High AF Power Mode.........................................................................................................................42 9.2.1. 9.2.2. 10. Speaker and Stand-alone Microphone ..................................................................................................... 43 Speaker plus Headset ............................................................................................................................... 44 Audio Accessories ................................................................................................................ 45 10.1. Headset ................................................................................................................................................45 10.2. Stand-alone microphone ....................................................................................................................46 10.3. Speaker ................................................................................................................................................46 11. Indication and services........................................................................................................ 47 11.1. Optical Indicators ...............................................................................................................................47 11.1.1. 11.1.2. Status Led ................................................................................................................................................ 47 CHARGE Led .......................................................................................................................................... 48 11.2. Switches ...............................................................................................................................................49 11.2.1. 11.2.2. 12. POWER ON Switch................................................................................................................................. 49 RESET Switch ......................................................................................................................................... 49 Connectors pinout ............................................................................................................... 50 12.1. Motherboard to Module ....................................................................................................................50 13. Module Interface Boards .................................................................................................... 53 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 7 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 13.1. Generality ............................................................................................................................................53 13.2. Short Description ................................................................................................................................53 13.3. Further Accessories for GPS version ................................................................................................53 14. GM862 Interface ................................................................................................................. 54 14.1. Stand-alone setup ...............................................................................................................................54 14.2. Interface connectors ...........................................................................................................................55 14.3. Content of the kit ................................................................................................................................55 15. GE863 Interface................................................................................................................... 56 15.1. Stand-alone setup ...............................................................................................................................56 15.2. Content of the kits ..............................................................................................................................57 15.2.1. 15.2.2. 15.2.3. GE863-PY/QUAD version ...................................................................................................................... 57 GE863-GPS version................................................................................................................................. 57 GE863-SIM version ................................................................................................................................. 57 15.3. Interface connectors ...........................................................................................................................57 15.4. Additional components for GPS version ..........................................................................................57 15.5. USB connector ....................................................................................................................................58 15.6. Serial port configuration....................................................................................................................59 15.6.1. 15.6.2. GE863-PY/QUAD ................................................................................................................................... 60 GE863 - GPS ........................................................................................................................................... 60 15.7. ANTENNA connectors .......................................................................................................................62 15.7.1. 15.7.2. 15.7.3. 16. GPS ANTENNA connector ..................................................................................................................... 62 GSM ANTENNA connector.................................................................................................................... 62 RFU ANTENNA connector .................................................................................................................... 62 GE864 Interface................................................................................................................... 63 16.1. Stand-alone setup ...............................................................................................................................63 16.2. Interface connectors ...........................................................................................................................64 16.3. Content of the kit ................................................................................................................................64 17. GE864-GPS Interface ......................................................................................................... 65 17.1. Part numbering...................................................................................................................................65 17.2. Stand-alone setup ...............................................................................................................................66 17.3. Interface connectors ...........................................................................................................................66 17.4. Contents of the kit ..............................................................................................................................66 17.5. Power supply .......................................................................................................................................67 17.6. GPS external LNA enable signal .......................................................................................................67 17.7. Serial port configuration....................................................................................................................68 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 8 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17.7.1. 17.7.2. 17.7.3. 17.7.4. ASC1 to RS-232 ...................................................................................................................................... 69 GPS to ASC1 (internal host controlling configuration) .......................................................................... 69 GPS to RS-232 (external host controlling configuration) ....................................................................... 70 GPS to USB ............................................................................................................................................. 70 17.8. GPIO settings ......................................................................................................................................71 17.8.1. 17.8.2. Internal host controlling configuration .................................................................................................... 71 External host controlling configuration ................................................................................................... 72 17.9. Antenna connectors ............................................................................................................................74 17.9.1. 17.9.2. 18. GSM antenna connector .......................................................................................................................... 74 GPS antenna connector ............................................................................................................................ 74 GE865 - SE867 AGPS Interface ........................................................................................ 75 18.1. Stand-alone setup ...............................................................................................................................75 18.2. Interface connectors ...........................................................................................................................76 18.3. Contents of the kit ..............................................................................................................................76 18.4. Serial connections ...............................................................................................................................77 18.4.1. 18.4.2. 18.4.3. GSM to GPS (GSM controlling configuration) ....................................................................................... 77 GSM to Trace........................................................................................................................................... 78 GPS to Trace(external host controlling configuration) ........................................................................... 79 18.5. Antenna connectors ............................................................................................................................79 18.5.1. 18.5.2. 19. GSM antenna connector .......................................................................................................................... 79 GPS antenna connector ............................................................................................................................ 79 GE865 - JF2 Interface ........................................................................................................ 80 19.1. Stand-alone setup ...............................................................................................................................80 19.2. Interface connectors ...........................................................................................................................81 19.3. Contents of the kit ..............................................................................................................................81 19.4. Power supply .......................................................................................................................................81 19.5. GPS external LNA enable signal .......................................................................................................82 19.6. Serial port configuration....................................................................................................................84 19.7. GSM to Trace......................................................................................................................................85 19.8. GPS to Trace .......................................................................................................................................85 19.9. GSM to USB ........................................................................................................................................86 19.10. GPS to USB .........................................................................................................................................86 19.11. GPS to GSM (internal host controlling configuration) ...................................................................87 19.12. GPIO settings ......................................................................................................................................87 19.12.1. 19.12.2. Internal host controlling configuration .................................................................................................... 88 External host controlling configuration ................................................................................................... 89 19.13. GPS serial interface setting ...............................................................................................................90 19.14. MEMS Sensor/EEPROM Interface ..................................................................................................90 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 9 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.15. GPS power-on management ..............................................................................................................90 19.16. Antenna connectors ............................................................................................................................91 19.16.1. 19.16.2. 20. GSM antenna connector .......................................................................................................................... 91 GPS antenna connector ............................................................................................................................ 91 GL865 - SL869/JN3 Interface ............................................................................................ 92 20.1. Stand-alone setup ...............................................................................................................................93 20.2. Interface connectors ...........................................................................................................................93 20.3. Contents of the kit ..............................................................................................................................93 20.1. Power supply .......................................................................................................................................94 20.2. GPS external LNA enable signal .......................................................................................................95 20.3. Serial port configuration....................................................................................................................96 20.4. GSM to Trace......................................................................................................................................97 20.5. GPS to Trace .......................................................................................................................................97 20.6. GSM to USB ........................................................................................................................................98 20.7. GPS to USB .........................................................................................................................................98 20.8. GPS to GSM (internal host controlling configuration) ...................................................................99 20.9. GPIO settings ....................................................................................................................................100 20.9.1. 20.9.2. Internal host controlling configuration .................................................................................................. 100 External host controlling configuration ................................................................................................. 101 20.10. Antenna connectors ..........................................................................................................................102 20.10.1. 20.10.2. 21. GSM antenna connector ........................................................................................................................ 102 GPS antenna connector .......................................................................................................................... 102 GC864 Interface ................................................................................................................ 103 21.1. Stand-alone setup .............................................................................................................................103 21.2. Interface connectors .........................................................................................................................104 21.3. Content of the kit ..............................................................................................................................104 22. GC864-C2 family Interface .............................................................................................. 105 22.1. Stand-alone setup .............................................................................................................................105 22.2. Interface connectors .........................................................................................................................106 22.3. Content of the kit ..............................................................................................................................106 23. GE865 Interface................................................................................................................. 107 23.1. Stand-alone setup .............................................................................................................................107 23.2. Interface connectors .........................................................................................................................108 23.3. Content of the kit ..............................................................................................................................108 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 10 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 24. GL865 Interface................................................................................................................. 109 24.1. Stand-alone setup .............................................................................................................................109 24.2. Interface connectors .........................................................................................................................110 24.3. Content of the kit ..............................................................................................................................110 25. UC864 family Interface ..................................................................................................... 111 25.1. Stand-alone setup .............................................................................................................................111 25.2. Interface connectors .........................................................................................................................112 25.3. Content of the kit ..............................................................................................................................112 26. HE910 family Interface ..................................................................................................... 113 26.1. Stand-alone setup .............................................................................................................................114 26.2. Interface connectors .........................................................................................................................114 26.3. Antenna connectors ..........................................................................................................................115 26.3.1. 26.3.2. 26.3.3. GSM/UMTS Antenna connector ........................................................................................................... 115 Receiver Diversity Antenna connector .................................................................................................. 115 GPS antenna connector .......................................................................................................................... 115 26.4. Expansion Connectors .....................................................................................................................116 26.4.1. 26.4.2. 26.4.3. 26.4.4. PL301/PL302 ......................................................................................................................................... 116 PL303/PL304/PL305 ............................................................................................................................. 117 PL102 ..................................................................................................................................................... 118 ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS ................................................................. 118 26.5. Content of the kit ..............................................................................................................................118 27. UE910 family Interface ..................................................................................................... 119 27.1. Stand-alone setup .............................................................................................................................120 27.2. Interface connectors .........................................................................................................................120 27.2.1. GSM/UMTS Antenna connector ........................................................................................................... 121 27.3. Expansion Connectors .....................................................................................................................121 27.3.1. 27.3.2. 27.3.3. 27.3.4. PL301/PL302 ......................................................................................................................................... 121 PL303/PL304/PL305 ............................................................................................................................. 122 PL102 ..................................................................................................................................................... 123 ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS ................................................................. 123 27.4. Content of the kit ..............................................................................................................................123 28. GE910 Interface................................................................................................................. 124 28.1. Stand-alone setup .............................................................................................................................125 28.2. Interface connectors .........................................................................................................................125 28.3. Antenna connectors ..........................................................................................................................126 28.3.1. GSM/GPRS Antenna connector ............................................................................................................ 126 28.4. Expansion Connectors .....................................................................................................................126 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 11 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 28.4.1. 28.4.2. 28.4.3. 28.4.4. PL301/PL302 ......................................................................................................................................... 126 PL303/PL304 ......................................................................................................................................... 127 PL102 ..................................................................................................................................................... 127 ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS .............................................................. 128 28.5. Content of the kit ..............................................................................................................................128 29. GE910-GNSS Interface ..................................................................................................... 129 29.1. Stand-alone setup .............................................................................................................................130 29.2. Interface connectors .........................................................................................................................130 29.3. Antenna connectors ..........................................................................................................................131 29.3.1. 29.3.2. GSM/GPRS Antenna connector ............................................................................................................ 131 GNSS antenna connector ....................................................................................................................... 131 29.4. Expansion Connectors .....................................................................................................................132 29.4.1. 29.4.2. 29.4.3. 29.4.4. PL301/PL302 ......................................................................................................................................... 132 PL303/PL304 ......................................................................................................................................... 133 PL102 ..................................................................................................................................................... 133 ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS .............................................................. 134 29.5. Content of the kit ..............................................................................................................................134 30. GE910-QUAD V3 Interface.............................................................................................. 135 30.1. Stand-alone setup .............................................................................................................................136 30.2. Interface connectors .........................................................................................................................136 30.3. Antenna connectors ..........................................................................................................................137 30.3.1. GSM/GPRS Antenna connector ............................................................................................................ 137 30.4. Expansion Connectors .....................................................................................................................137 30.4.1. 30.4.2. 30.4.3. 30.4.4. PL301/PL302 ......................................................................................................................................... 137 PL303/PL304 ......................................................................................................................................... 138 PL102 ..................................................................................................................................................... 138 ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS .............................................................. 139 30.5. Content of the kit ..............................................................................................................................139 31. DE910 family Interface ..................................................................................................... 140 31.1. Stand-alone setup .............................................................................................................................141 31.2. Interface connectors .........................................................................................................................141 31.3. Antenna connectors ..........................................................................................................................142 31.3.1. 31.3.2. 31.3.3. CDMA Antenna connector .................................................................................................................... 142 Receiver Diversity Antenna connector .................................................................................................. 142 GPS antenna connector .......................................................................................................................... 142 31.4. Expansion Connectors .....................................................................................................................143 31.4.1. 31.4.2. 31.4.3. 31.4.4. PL301/PL302 ......................................................................................................................................... 143 PL303/PL304/PL305 ............................................................................................................................. 144 PL102 ..................................................................................................................................................... 145 ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS ................................................................. 145 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 12 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31.5. Content of the kit ..............................................................................................................................145 32. CE910 family Interface ..................................................................................................... 146 32.1. Stand-alone setup .............................................................................................................................147 32.2. Interface connectors .........................................................................................................................147 32.3. Antenna connectors ..........................................................................................................................148 32.3.1. CDMA Antenna connector .................................................................................................................... 148 32.4. Expansion Connectors .....................................................................................................................148 32.4.1. 32.4.2. 32.4.3. 32.4.4. PL301/PL302 ......................................................................................................................................... 148 PL303/PL304 ......................................................................................................................................... 149 PL102 ..................................................................................................................................................... 149 ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS ................................................................. 150 32.5. Content of the kit ..............................................................................................................................150 33. GL865 V3 Interface ........................................................................................................... 151 33.1. Stand-alone setup .............................................................................................................................151 33.2. Interface connectors .........................................................................................................................152 34. LE920 Interface ................................................................................................................. 153 34.1. Stand-alone setup .............................................................................................................................154 34.2. Interface connectors .........................................................................................................................154 34.3. Antenna connectors ..........................................................................................................................155 34.3.1. 34.3.2. 34.3.3. Main Antenna connector........................................................................................................................ 155 Diversity Antenna connector ................................................................................................................. 155 GPS Antenna connector ......................................................................................................................... 155 34.4. Expansion Connectors .....................................................................................................................155 34.4.1. 34.4.2. PL102/PL104 ......................................................................................................................................... 155 ON_OFF & UNCONDITIONAL SHUTDOWN, RESET BUTTONS ................................................ 157 34.5. Content of the kit ..............................................................................................................................157 35. HE920 Family Interface.................................................................................................... 158 35.1. Stand-alone setup .............................................................................................................................159 35.2. Interface connectors .........................................................................................................................159 35.3. Antenna connectors ..........................................................................................................................160 35.3.1. 35.3.2. 35.3.3. Main Antenna connector........................................................................................................................ 160 Diversity Antenna connector ................................................................................................................. 160 GPS Antenna connector ......................................................................................................................... 160 35.4. Expansion Connectors .....................................................................................................................160 35.4.1. 35.4.2. PL102/PL104 ......................................................................................................................................... 160 ON_OFF & UNCONDITIONAL SHUTDOWN, RESET BUTTONS ................................................ 162 35.5. Content of the kit ..............................................................................................................................162 36. HE910 V2 family Interface ............................................................................................... 163 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 13 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36.1. Stand-alone setup .............................................................................................................................164 36.2. Interface connectors .........................................................................................................................164 36.3. Antenna connectors ..........................................................................................................................165 36.3.1. 36.3.2. GSM/UMTS Antenna connector ........................................................................................................... 165 GPS antenna connector .......................................................................................................................... 165 36.4. Expansion Connectors .....................................................................................................................166 36.4.1. 36.4.2. 36.4.3. 36.4.4. PL301/PL302 ......................................................................................................................................... 166 PL303/PL304/PL305 ............................................................................................................................. 167 PL102 ..................................................................................................................................................... 168 ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS ................................................................. 168 36.5. Content of the kit ..............................................................................................................................168 37. UE910 V2 family Interface ............................................................................................... 169 37.1. Stand-alone setup .............................................................................................................................170 37.2. Interface connectors .........................................................................................................................170 37.3. Antenna connectors ..........................................................................................................................171 37.3.1. GSM/UMTS Antenna connector ........................................................................................................... 171 37.4. Expansion Connectors .....................................................................................................................171 37.4.1. 37.4.2. 37.4.3. 37.4.4. PL301/PL302 ......................................................................................................................................... 171 PL303/PL304/PL305 ............................................................................................................................. 172 PL102 ..................................................................................................................................................... 173 ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS ................................................................. 173 37.5. Content of the kit ..............................................................................................................................173 38. CL865 Interface ................................................................................................................. 174 38.1. Stand-alone setup .............................................................................................................................174 38.2. Interface connectors .........................................................................................................................175 38.3. Antenna connectors ..........................................................................................................................176 38.3.1. CDMA Antenna connector .................................................................................................................... 176 38.4. Expansion Connectors .....................................................................................................................176 38.4.1. 38.4.2. 38.4.3. PL101 ..................................................................................................................................................... 176 PL106 ..................................................................................................................................................... 176 PL107 ..................................................................................................................................................... 177 38.5. Content of the kit ..............................................................................................................................177 39. GE866-QUAD Interface ................................................................................................... 178 39.1. Stand-alone setup .............................................................................................................................178 39.2. Interface connectors .........................................................................................................................179 39.3. Antenna connectors ..........................................................................................................................180 39.3.1. GSM Antenna connector ....................................................................................................................... 180 39.4. Expansion Connectors .....................................................................................................................180 39.4.1. PL102 ..................................................................................................................................................... 180 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 14 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39.4.2. 39.4.3. 39.4.4. 39.4.5. 39.4.6. 39.4.7. PL101 ..................................................................................................................................................... 181 PL103 ..................................................................................................................................................... 181 PL104 ..................................................................................................................................................... 182 PL108 ..................................................................................................................................................... 182 PL403 ..................................................................................................................................................... 182 PL401 and 402 ....................................................................................................................................... 183 39.5. Audio selection ..................................................................................................................................183 39.6. Content of the kit ..............................................................................................................................183 40. UL865 Interface ................................................................................................................. 184 40.1. Stand-alone setup .............................................................................................................................184 40.2. Interface connectors .........................................................................................................................185 40.3. Antenna connectors ..........................................................................................................................186 40.3.1. GSM Antenna connector ....................................................................................................................... 186 40.4. Expansion Connectors .....................................................................................................................186 40.4.1. 40.4.2. PL101 ..................................................................................................................................................... 186 PL106 ..................................................................................................................................................... 186 40.5. Content of the kit ..............................................................................................................................187 41. LE910 Interface ................................................................................................................. 188 41.1. Stand-alone setup .............................................................................................................................189 41.2. Interface connectors .........................................................................................................................189 41.3. Antenna connectors ..........................................................................................................................190 41.3.1. 41.3.2. GSM/GPRS Antenna connector ............................................................................................................ 190 GNSS antenna connector ....................................................................................................................... 190 41.4. Expansion Connectors .....................................................................................................................191 41.4.1. 41.4.2. 41.4.3. 41.4.4. PL301/PL302 ......................................................................................................................................... 191 PL303/PL304 ......................................................................................................................................... 192 PL102 ..................................................................................................................................................... 192 ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS .............................................................. 193 41.5. Content of the kit ..............................................................................................................................193 42. GPIO ports ......................................................................................................................... 194 42.1. GPIO location ...................................................................................................................................195 42.1.1. 42.1.2. 42.1.3. 42.1.4. 42.1.5. 42.1.6. 42.1.7. 42.1.8. 42.1.9. 42.1.10. 42.1.11. GM862 Interface .................................................................................................................................... 195 GE863-GPS Interface ............................................................................................................................ 197 GE863 Interfaces (p/n 3990250684 -3990250685-3990250703).......................................................... 199 GE864 Interface (p/n 3990250672) ....................................................................................................... 200 GE864-GPS Interface (p/n 3990250822) .............................................................................................. 201 GE865/SE867-AGPS Interface (p/n 3990250814)................................................................................ 202 GC864 Interface ..................................................................................................................................... 203 GC864-C2 Interface (p/n 3990250683) ................................................................................................. 204 UC864 Interface ..................................................................................................................................... 205 HE910 Interface ..................................................................................................................................... 206 GE910 Interface ..................................................................................................................................... 208 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 15 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.12. 42.1.13. 42.1.14. 42.1.15. 42.1.16. 42.1.17. 42.1.18. 42.1.19. 42.1.20. 42.1.21. 43. DE910 Interface ..................................................................................................................................... 210 CE910 Interface ..................................................................................................................................... 212 GL865 V3 Interface ............................................................................................................................... 214 UL865 Interface ..................................................................................................................................... 216 HE920 Family Interface......................................................................................................................... 218 HE910 V2 Interface ............................................................................................................................... 220 UE910 V2 Interface ............................................................................................................................... 222 CL865 Interface ..................................................................................................................................... 224 GE866-QUAD Interface ........................................................................................................................ 225 LE910 Interface ..................................................................................................................................... 227 SCHEMATICS .................................................................................................................. 229 43.1. EVK2 Mother Board ........................................................................................................................230 43.2. GM862 Interface Board ...................................................................................................................235 43.3. GE863 Interface Board ....................................................................................................................236 43.4. GE864 Interface board ....................................................................................................................238 43.5. GE864 Interface board - Automotive.............................................................................................239 43.6. GE864 Interface board - V2............................................................................................................240 43.7. GE864-GPS Interface board ...........................................................................................................241 43.8. GE865/SE867-AGPS Interface board.............................................................................................243 43.9. GE865 Interface board ....................................................................................................................245 43.10. GL865 Interface board ....................................................................................................................246 43.11. GC864 Interface board ....................................................................................................................247 43.12. GC864-C2 Interface board ..............................................................................................................248 43.13. UC864 Interface board ....................................................................................................................249 43.14. HE910/UE910 Interface board ........................................................................................................251 43.15. GE910 Interface board ....................................................................................................................255 43.16. GE910-GNSS Interface board .........................................................................................................259 43.17. GE910-QUAD V3 Interface board..................................................................................................263 43.18. GE865 - JF2 Interface board ..........................................................................................................267 43.19. GL865 - SL869/JN3 Interface board ..............................................................................................270 43.20. DE910 Interface board .....................................................................................................................273 43.21. CE910 Interface board .....................................................................................................................277 43.22. GL865 V3 Interface board...............................................................................................................281 43.23. LE920 Interface board .....................................................................................................................283 43.24. HE920 family Interface board.........................................................................................................286 43.25. HE910 V2 Interface board...............................................................................................................289 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 16 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.26. UE910 V2 Interface board ...............................................................................................................293 43.27. CL865 Interface board .....................................................................................................................297 43.28. GE866-QUAD Interface board .......................................................................................................299 43.29. LE910 Interface board .....................................................................................................................303 43.30. UL865 Interface board .....................................................................................................................307 44. Service and firmware update ........................................................................................... 309 45. SAFETY RECOMMENDATIONS ................................................................................. 310 45.1. Disposal of this product in the European Union............................................................................311 45.2. Disposal of this product in other countries outside the European Union....................................311 46. Document History ............................................................................................................. 312 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 17 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 1. Introduction 1.1. Scope The Aim of this document is the handling description of the developer's Evaluation KIT second edition, a laboratory tool named EVK2. 1.2. Audience All given information shall be used as a guide and a starting point for properly developing of your product. Obviously this document cannot cover all the hardware solutions and products that may be designed. 1.3. Contact Information, Support For general contact, technical support, to report documentation errors and to order manuals, contact Telit's Technical Support Center (TTSC) at: TS-EMEA@telit.com TS-NORTHAMERICA@telit.com TS-LATINAMERICA@telit.com TS-APAC@telit.com Alternatively, use: http://www.telit.com/en/products/technical-support-center/contact.php For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit: http://www.telit.com To register for product news and announcements or for product questions contact Telit's Technical Support Center (TTSC). Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements. Telit appreciates feedback from the users of our information. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 18 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 1.4. Text Conventions Danger - This information MUST be followed or catastrophic equipment failure or bodily injury may occur. Caution or Warning - Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction. Tip or Information - Provides advice and suggestions that may be useful when integrating the module. All dates are in ISO 8601 format, i.e. YYYY-MM-DD. 1.5. Related Documents * AT Commands Reference Guides of the relevant modules Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 19 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 1.6. Content of the kit Please check out the content of your EVK2 kit; if any of the items is missing, please contact your supplier. Description EVK2 MOTHERBOARD INFORMATION NOTE 2 PIN JUMPER FEMALE CONN ASSEMBLED USB A-B CABLE RED & BLACK CABLE WITH PLUGS GSM-UMTS MAGNETIC ANTENNA CABLE RG174 WITH SMA/M Quantity 1 1 18 1 1 1 Table 1 GE863-PY Interface Board (upper) fitted on EVK2 Motherboard (lower). Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 20 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 2. Description The motherboard CS1139B can be split into several functional blocks depending on the implemented function; the following drawings show a block diagram and the displacement of the main blocks on motherboard. Miscellaneous signals, connections and routing on CS1139B. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 21 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 CS1139B circuital displacement 2.1. PCB characteristics Material: Thickness: Surface finishing: FR4 0, 95 mm Chemical gold plate Ni 5um/ Au 0,1um Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 22 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 2.2. Mechanical characteristics of the assembled PCBs 2.2.1. Mother Board Length Width Height Weight 2.2.2. 2.2.5. CS1151A 75 mm (max 84,70mm) 78,74 mm 21,00 mm 40 gr (with module) 44,3 gr (with module for GPS version) GE864 Interface Length Width Height Weight CS1150B 66,04 mm 78,74 mm 21,00 mm 27 gr (without the module) GE863 Interface Length Width Height Weight Weight 2.2.4. 100 mm (max 102,6 mm) 160 mm (max 166,10mm) 47,6 mm (included the support with columns) 200 gr (without any interface) GM862 Interface Length Width Height Weight 2.2.3. CS1139B CS1152B 66,04 mm (max 75,20mm) 78,74 mm 21,00 mm 36 gr (with module) GE864-GPS Interface Length Width Height CS1439B 78.70 mm (max mm) 83.70 mm 21 mm Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 23 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 2.2.6. GC864 Interface CS1203B Length Width Height Weight 2.2.7. GC864-C2 Interface CS1231X Length Width Height Weight 2.2.8. 101.00 mm 78.74 mm mm GE865/JF2 Interface CS1521 Length Width Height 2.2.11. 66,04 mm (max 75,20mm) 78,74 mm 21,00 mm 34 gr (with module) GE865/SE867-AGPS Interface CS1433 Length Width Height 2.2.10. 50,00 mm 33,00 mm 5,60 mm 13,8 gr (with module) GE865 Interface CS1324A Length Width Height Weight 2.2.9. 66,04 mm 78,74 mm 21,00 mm 27 gr (without the module) 101,00 mm 78,74 mm mm GL865 Interface Length Width Height Weight CS1431A 66,04 mm (max 75,20mm) 78,74 mm 21,00 mm 34 gr (with module) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 24 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 2.2.12. UC864-CC864 Interface KS0101C Length Width Height Weight 2.2.13. HE910 Interface CS1467C Length Width Height 2.2.14. 107,00 mm 102,00 mm 25,00 mm DE910 Interface CS1467D Length Width Height 2.2.19. 107,00 mm 102,00 mm 25,00 mm GE910-QUAD V3 Interface CS1467F Length Width Height 2.2.18. 107,00 mm 102,00 mm 25,00 mm GE910-GNSS Interface CS1467F Length Width Height 2.2.17. 107,00 mm 102,00 mm 25,00 mm GE910 Interface CS1467D Length Width Height 2.2.16. 107,00 mm 102,00 mm 25,00 mm UE910 Interface CS1467D Length Width Height 2.2.15. 102,00 mm 67,50 mm 20,80 mm 55 gr (without module) 107,00 mm 102,00 mm 25,00 mm CE910 Interface CS1467D Length Width Height 107,00 mm 102,00 mm 25,00 mm Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 25 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 2.2.20. GL865 V3 Interface CS1531B Length Width Height 2.2.21. LE920 Interface KS0145B Length Width Height 2.2.22. 92,00 mm 107,00 mm 25,00 mm CL865 Interface CS1531B Length Width Height 2.2.26. 107,00 mm 102,00 mm 25,00 mm UE910 V2 Interface CS1467D Length Width Height 2.2.25. 92,00 mm 107,00 mm 25,00 mm HE910 V2 Interface CS1467D Length Width Height 2.2.24. 92,00 mm 107,00 mm 25,00 mm HE920 Interface KS0145B Length Width Height 2.2.23. 92,00 mm 89,00 mm 25,00 mm 92,00 mm 89,00 mm 25,00 mm GE866-QUAD Interface CS1582 Length Width Height 92,00 mm 89,00 mm 25,00 mm Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 26 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 2.2.27. UL865 Interface CS1531B Length Width Height 2.2.28. 92,00 mm 89,00 mm 25,00 mm LE910 Interface CS1467F Length Width Height 107,00 mm 102,00 mm 25,00 mm NOTE: The overall height for every combination (mother board + interface board) is still the height of the mother board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 27 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 3. Startup procedure The motherboard factory setup is: Serial port DC source Batt.Charger connector (PL106) RX Amplifier RS232 + (5/40) V / 1A On Audio 1 Respect the following order to use the EVK2: * * * * * * * * * insert your SIM card set properly all jumpers in the desired position plug the module Interface board into PL201 and PL202 connect the antenna to RF connector (on module or on Interface Board) connect the audio accessories if required plug the external power supply into the right socket, depending from DC source switch ON the power supply connect the serial cable between your PC and UART (RS232 or USB 1.1) push ON/OFF button on EVK Board for at least 5 seconds, on the XX910 form factor products, push ON/OFF button on Interface Board for at least 5 seconds until the STATUS LED is on Your EVK2 should now be operational and ready to receive AT Commands. NOTE: When you use USB port, it is very important to respect the following sequences: Start: first turning ON the EVK2 and then connecting it to the PC Stop: first disconnecting the PC and then turning OFF the EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 28 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 4. Insertion of the Interface Boards Every Interface Board must be inserted on CS1139B paying great attention to match the position of the main connectors; this has been made easy: optically by a triangle drawn on both printed circuits (except CS1231X) ; mechanically shifting a column out of regular square cross position. Both guide systems are highlighted by orange color as shown on the next figure. Positioning Guide Systems of GM862 Interface Board on CS1139B. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 29 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 5. Power supply setting The EVK2 could be powered by different external sources, only one at time. The requested setting is made inserting the proper jumper connectors in the right position as described in the following paragraphs. Be careful to the connections, even if every supply line is protected by a diode against "polarity reversing" and by a 0 resistor against "short circuiting". 5.1. Fixed DC source Connect a +3,8V / 2A fixed DC source to PL101 respecting the polarization; short pin2 & pin3 - PL104 and pin1 & pin2- PL105 by 2 contacts jumper connectors. No other jumpers are needed. +3,8V fixed source setting Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 30 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 5.2. Variable DC source Connect a + 5/40 V / 1A variable DC source to PL102 (by wires) or to SO101 (by coaxial plug), with care to the polarities. Short pin1& pin2-PL104 and pin1& pin2-PL105 by inserting 2 contacts jumper connectors. No other jumpers are needed. Variable DC source setting NOTE: It is useful set the variable DC source at 6V minimum to avoid problems with voltage drops due to the length of the wires or the conductors gauge. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 31 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 5.2.1. Coaxial Plug The figure 7 shows the connections of the Power Plug of left part of figure 6. Coaxial "Power Plug" connection. 5.3. Li-Ion Battery pack and Charger Connect a Li-Ion battery pack to PL107 with care to the polarity then short pin 2& pin3PL105 by inserting the 2 contacts jumper connector. If the battery pack needs to be recharged, connect a +6V / 0,5A fixed DC source to PL103, with care to the polarity; short PL106 inserting a 2 contacts jumper connector as shown in figure 8: the yellow CHARGE LED will be on during the initial phase of charge. If you remove the battery pack when the charge stops (no current flows), immediately REMOVE also the jumper of PL106. Battery Pack and Battery Charger wired connections and setting. WARNING: NEVER CONNECT any Battery Charging source to PL102 without connected Battery!! Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 32 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 5.4. Application Notes 5.4.1. Li-Ion Battery Pack The 3.7V Li-Ion rechargeable Battery Pack should be connected directly to PL107 connector. Remember to use the connection cables as short as possible, with the appropriate conductors gauge and the other attributes, such as device power budget and cable flexibility, in order to match the specified voltage drop (especially during the high current absorption periods). To obtain the best performance we suggest a capacity of 1000 mAh (not lower than 500 mAh). 5.4.2. About Current Charger With a +6V Current Unlimited Source connected to PL103 connector, the battery pack will be directly charged through VBATT connector pins of the Telit Modules, under control of the Internal Charge Algorithm (only on models where is implemented). Depending of the size, the Li-Ion cell manufacturers suggest a charge current value not greater than 1,5C (C= Capacity of the battery pack, expressed in mAh); even if a lower current means a longer charging time, a current equal to 0,5C is considered to be a good choice. With reference to the schematic diagram 30276SE11139A -sheet1, the Current Limiting Circuit (Q102, Q103, R106, R107, R108, R109, R110, R111, R112, R113, C105) sets the maximum value of the Charge Current in respect to the law: I ch = VbeQ102 where R par R par = //R110,R111,R112,R113 With the default values, the charge current will be 470mA, which will charge Battery Packs with a capacity from 350mAh to 1000mAh, without any dissipation problem. If a higher capacity Battery Pack is needed, you must increment the Time Out in the Telit Modules. WARNING: SET THE MAXIMUM VOLTAGE OF the CURRENT UNLIMITED SOUCE LOWER than +8V. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 33 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 6. Serial interface The following figure shows the architecture of the serial ports. Serial ports block diagram. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 34 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 6.1. Serial Port Setup Communications between your application and the Telit modules are allowed connecting the DTE to the Asynchronous Serial Interfaces of Base-Band Chip, ASC0 and ASC1, through the stacked standard RS232 communications port (double 9 way D-socket connector at slow data rates of RS232 protocol) or a standard USB-B Series receptacle (at higher data rates of USB1.1 specification through a CMOS HUB that realizes a multiple attachment point device). Double 9 way D-Socket Connector The selection is made short circuiting PL302&PL303 (RS232 mode) or PL302&PL301 (USB 1.1 mode) by 10 pieces of 2 contacts jumpers. This solution has been implemented because you can isolate every single line during the development. Serial Ports selection Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 35 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 7. Audio Section 7.1. Overview The Base Band chip of the Telit's modules provides one or two (depends of model) audio paths both in receive and in transmit sections, which could be active only one at time. To turn on your well-suited section on EVK2, please refer to "AF Amplifiers Setting "paragraph and followings. To know which are the suggested performances of the EVK2 audio transducers, refer to "Audio Accessories "paragraph. 7.1.1. History The Baseband chip of our modules was developed for the cellular phones, which needed two separated amplifiers both in RX and in TX section. A couple of amplifiers had to be used with internal audio transducers (Handset mode, HS) while the other couple of amplifiers must be used with external audio transducers (Handsfree mode, HF). Transducers definitions: Headsets are transducers that receive an electrical signal from a receiver and use speakers placed in close proximity to the ears to convert the signal into audible sound waves. In the context of telecommunication, the word Headset is also commonly understood to refer to a combination of Headphone and Microphone used for two-way communication, like with a mobile phone. Earphones are small Headphones that are placed directly outside of the ear canal, but without fully enveloping it. They are generally inexpensive and are favored for their portability and convenience. Earpiece A part whether of a telephone receiver or hearing aid, that fits in or is held next to the ear. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 36 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 7.2. Actual The HS and HF definitions have been kept in the Software and on the schematics of the Telit modules, but with EVK2 we will refer to Audio1 and Audio2 section instead of Handset and Handsfree respectively, remembering that: they can have fully equivalent electrical performances (like the two microphone amplifiers) they can activate the same functionalities (like the Echo Canceller module) they can offer slightly different performances (like the two speaker buffering stages) 7.2.1. The choice The activation of the audio path is made Hardware by AXE line or Software by AT#CAP command. If you don't have any load driving constraint (like a speaker with an impedance coil lower than 16 ohm), the choice between one or other "block" could be done without consideration related to the electrical performances; for example in order to overcome the PCB design difficulties. 7.3. Differential and Single Ended 7.3.1. Concepts Any voltage can be characterized by a potential difference between two terminals. The configuration of the two terminals and how the signal is delivered from output to input allows the signal to be more generally described in one of three ways: Single-ended signal. This is a signal delivered between a signal trace and a ground. One terminal for a single-ended connection is always at fixed potential (usually Ground). Differential Signals. These are signals that travel through a pair of traces. On the signal pair, neither of the terminals is Ground. Common mode Signals. They represent a special case of differential signals, also travelling between a pair of traces, where the voltage potential on both signals is the same. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 37 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 7.3.2. Benefits and disadvantages Differential amplifiers are desirable to use, especially in audio applications where signal levels are very low such as those from microphones. Classically, the benefits obtained from differential amplification are: Increase of Common Mode Rejection Ratio (CMRR) Differential inputs enable cancellation of any noise common on both inputs. Noise generated at the input of the amplifier has a greater effect than noise generated at the output, because any noise on the input is multiplied by the gain of the amplifier. Increase Signal to Noise Ratio (SNR) The inputs to the amplifier are especially sensitive to noise because they are typically not driven by a very low impedance source. High Rejection in Electromagnetic Interference (EMI) Noise immunity is very important in wireless phones because the RF signal is sent in bursts such that the frequency between bursts is in the audio band. RF rectification is such a problem that many manufacturers shield the audio portion of the phone. Double Useful signals level The signal levels from microphone and the voltage swing to the load are doubled. Then the AF power to the load it is 4 times the single-ended Afpower at the same voltage supply. No output blocking capacitor is needed Even if the differential outputs are biased at half-supply; no DC voltage exists across the load. You do not need the big, expensive and heavy blocking capacitors (generally from 33 F to 1000 F), lowering the cost and saving PCB space There is no frequency limiting effect due to the high pass filter network created with the speaker impedance and the coupling capacitance. Less shielding is required from amplifier to load Mainly we have only one disadvantage using differential amplification: the routing of one more signal line could be more difficult and the additional trace requires more board space. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 38 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 7.3.3. Settings Connecting your accessories to SO401 in/out connector, you will implement Single Ended Input/Output configurations. Removing all 2 contacts jumpers inserted between PL402&PL403 or PL403&PL404, the in/out lines of our modules will be directly available on PL402 and PL404 connectors. In such a way, you will be able to implement fully Differential Input/Output configurations. Only with GC864-QUAD/PY-C2 modules the Ear output lines are AC coupled. PL402 and PL404 Fully Differential audio lines. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 39 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 8. AF Amplifiers Setting The Base Band Processor Audio Amplifiers selection is made short-circuiting PL403&PL402 (RX Amplifier 1) or PL403&PL404 (RX Amplifier 2). In such a way you could verify the complete performance of both audio paths. Base Band Audio Amplifiers selection Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 40 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 9. Audio outputs The EVK2 output audio signals could be drive a device connected to SO401 (LOW AF POWER or to PL401 (HIGH AF POWER mode). mode) 9.1. Low AF Power Mode Inserting the 2 contacts jumpers as explained at paragraph 9A, a standard off-the-shelf Headset should be connected to the SO401 (3 contacts, 2.5mm diameter jack connector). With such an insertion, the Telit Modules will power the Microphone through a Single Ended input circuit and the Earpiece through a Single Ended/ AC coupled output circuit. NOTE: The acoustic performance of the Headset (frequency response, loudness) largely depends by its housing, fitting and acoustic impedance. The coil impedance of the Headset should be higher than 15 ohm @ 1KHz. Headset insertion Headset plug connection Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 41 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 9.2. High AF Power Mode Connecting an 8 ohm Speaker to PL401 by a 2 contacts female connector, you could drive it through the 500mW Power Amplifier. In this case the Speaker will be driven in fully differential configuration, with no side connected to ground and without any output coupling capacitor. Therefore care must be taken because there is DC voltage on both sides of the Speaker. The overall gain of this amplifier can be modified varying the ratios R406/R404 and R407/R410: A v = 2* R 404 R 407 = 2* R 406 R 410 if R404=R407 and R406=R410 NOTE: The coil impedance of the Speaker should be higher than 8 ohm @ 1KHz . Speaker insertion Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 42 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 9.2.1. Speaker and Stand-alone Microphone If you are using a Speaker, you can connect a stand-alone electrete microphone by a coaxial 2,5mm plug to SO401, respecting the following pin-out. Figure 1: Microphone Plug Connection Speaker & Microphone case insertion Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 43 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 9.2.2. Speaker plus Headset If you have chosen to connect the Speaker to HIGH AF POWER output, without having a stand-alone electret microphone, it is also possible to connect a standard off-the-shelf Headset to SO401 without any problem, as shown in the figure 18: the AF output signal will be heard on both Speaker and Earpiece. WARNING: You must use the right coil impedance depending from audio output you want to use. If you sort out the LOW AF POWER solution connecting your Headset to SO401, the coil impedance must be at least 16@1KHz or higher. If you sort out the HIGH AF POWER solution connecting your Speaker to PL401, the coil impedance must be at least 8@1KHz or higher Speaker plus Headset insertion Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 44 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 10. Audio Accessories The following tables show the suggested specification to obtain the best performance from offthe-shelf accessories. 10.1. Headset Microphone electrical characteristics Nominal sensitivity -45dBVrms/1Pa (+/- 3dB) Line coupling AC Nominal Voltage 2V Range of Using Voltage (1/10)V Consumption Current (150/500 ) A Impedance 2,2K Signal to Noise Ratio 56dB /1KHz/1Pa (A curve) Inner EMI capacitor between 10pF, 33pF terminals Earpiece electrical characteristics Rated Input Power 5mW Maximum Input Power 20mW Coil Impedance 32 5 @ 1kHz SPL 953 dB @ 1KHz/1mW sine wave Resonance frequency (Fo) < 350Hz Useful Bandwidth Fo / 8000 Hz @ -3dB Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 45 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 10.2. Stand-alone microphone Microphone electrical characteristics Nominal sensitivity -45dBVrms/1Pa (+/- 3dB) Line coupling AC Nominal Voltage 2V Range of Using Voltage (1/10)V Consumption Current (150/500 ) A Impedance 2,2K Signal to Noise Ratio 56dB /1KHz/1Pa /A curve EMI capacitor between terminals 10pF, 33pF 10.3. Speaker Speaker electrical characteristics Rated Input Power 500 mW Maximum Input Power 1W Coil Impedance 8 SPL 853 dB @ 1KHz Resonance frequency (Fo) < 350Hz Useful Bandwidth Fo / 8000 Hz @ -3dB Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 46 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 11. Indication and services 11.1. Optical Indicators 11.1.1. Status Led It is a debug aid that shows information on the network service availability and Call status. LED status Device Status Permanently off Device off Fast blinking (period 1s, Ton 0,5s) Net search / Not registered / turning off Slow blinking (period 3s, Ton 0,3s) Registered: full service Permanently on A call is active STAT_LED position Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 47 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 11.1.2. CHARGE Led A yellow LED is used as Charge In Act Indicator, as explained in the following table. CHARGE LED Meaning Always on Always off Start Charge/ Hugh current Charge in act Low current Charge in act/Charge stop Table 7: CHARGE LED indications CHARGE LED position Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 48 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 11.2. Switches You turn On/Off or Reset the EVK2 by 2 push buttons. 11.2.1. POWER ON Switch Push ON/OFF button on EVK Board for at least 5 seconds, on the XX910 form factor products, push ON/OFF button on Interface Board for at least 5 seconds until the STATUS LED starts to slowly blink (ON state) or stops to blink (OFF state). 11.2.2. RESET Switch Whenever the RESET SWITCH is pressed, you could reset the Telit module in use. When the device is reset, it stops any operation without doing any detach operation from the network where it is registered and it reboots after the release of the Reset Switch. This behavior is not a proper shut down because any GSM device is requested to issue a detach request at turning off. For this reason the Reset pressing action must not be used to normally reboot/shutting down the device, but only as an emergency exit in the rare case the device remains stuck waiting for some network response. The RESET is internally controlled at start-up to achieve always a proper power-on reset sequence, so there is no need to control this pin on start-up. It may only be used to reset a device already on that is not responding to any command. SWITCHES position Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 49 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 12. Connectors pinout 12.1. Motherboard to Module The connections between CS1139B and every Telit module Interface Board are made through two 40 pin male connectors. Theirs pin functions are listed in the following tables. 1 Pin 1 2 3 Signal NC 1 TX_Trace RX_Trace 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 IIC_SDA_HW GND IIC_SCL_HW SSC0_CLK SSC0_MTSR SSC0_MRST NC GND GND GND GND C109/DCD C104/RXD C103/TXD C108/DTR GND C107/DSR C105/RTS C106/CTS C125/RING NC GND GND GND GND EAR_HF+ EAR_MT- PL201-CS1139B Type Function Digital Output Digital Input Digital In/Out DC voltage Digital Input Digital Output Digital In/Out Digital In/Out to RS232 or USB level translators from RS232 or USB level translators from/to USB level translators Power from USB level translators to USB level translators from/to USB level translators from/to USB level translators DC voltage DC voltage DC voltage DC voltage Digital Output Digital Output Digital Input Digital Input DC voltage Digital Output Digital Input Digital Output Digital Output Power Power Power Power to RS232 or USB level translator to RS232 or USB level translator from RS232 or USB level translator from RS232 or USB level translator Power to RS232 or USB level translator from RS232 or USB level translator to RS232 or USB level translator to RS232 or USB level translator DC voltage DC voltage DC voltage DC voltage AC Out Voltage AC Out Voltage Power Power Power Power Audio Audio DO NOT CONNECT Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 50 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31 32 33 34 35 36 37 38 39 40 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 EAR_HFEAR_MT+ AXE MIC_HFMIC_MT+ MIC_HF+ MIC_MTGND GND GND Function VBATT VBATT VBATT VBATT GND GND GND GND CHARGE CHARGE GND GND GND GND ON_OFF* NC RESET* NC NC NC STAT_LED NC NC NC GND GND GND GND NC NC SIMIO SIMCLK AC Out Voltage AC Out Voltage DC voltage AC In Voltage AC In Voltage AC In Voltage AC In Voltage DC voltage DC voltage DC voltage Audio Audio INT/EXT Switching Audio Audio Audio Audio Power Power Power PL202-CS1139B Type DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage DC voltage NOTES Power Power Power Power Power Power Power Power Power Power Power Power Power Power Pull up to VBATT DC voltage Module Reset Open Collector Status Indicator LED DC voltage DC voltage DC voltage DC voltage Power Power Power Power 3V Only Digital Signal SIM Data I/O SIM Clock Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 51 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 33 34 35 36 37 38 39 40 SIMRST SIMVCC SIMIN NC NC GND GND GND DC voltage DC voltage DC voltage SIM Reset SIM Power SIM inside detector DC voltage DC voltage DC voltage Power Power Power Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 52 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 13. Module Interface Boards 13.1. Generality You can use your EVK2 with see APPLICABILITY LIST Telit modules fitted on its own Interface Board; all connections are made through 2x40 contacts connectors. It's possible to use these Interface Boards also in stand-alone mode, inserting the "not mounted" components (related to RESET BUTTON, ON BUTTON, SIM HOLDER and STATUS LED functions) plus the use of an external level translator circuit. For more information refer to Telit Product Description. 13.2. Short Description The interface boards convert the module connection technology (board-to-board or BGA soldering) into a PTH pin connector. The part of the basic interfaces is served by the motherboard, whereas specific interfaces according to the type of the module (antenna, general purpose inputs/outputs GPIO, ADC/DAC, UART) are available on the adapter board to connect it to the user applications, extension boards, measurements equipment or other tools. 13.3. Further Accessories for GPS version When test the GPS products, besides the content of the single kits you need the accessories listed in below table. SMA/MMCX cable adapter 1ff1400073tlb Module under test Interface Board P/N GPS Antenna 1rr0100071tlb 1 - GM862-GPS GE863-GPS GE864-GPS SE867-AGPS HE910 3990250670 3990250671 TBD TBD 3990250845 1 1 1 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 53 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 14. GM862 Interface This board allows easily interfacing the module with the EVK2 and testing its functionalities; any version of GM862 can be insert. No settings are needed. GM862 Interface Board 14.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount the following missing components: RESET Button ON Button; STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 54 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 14.2. Interface connectors The following connectors are available: 2 male connectors (30 pins each one: PL102, PL103), on which it is possible to connect external devices like user's application, Telit extension boards, measurements equipment or other tools 2 female connectors (40 pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines). 14.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GM862 INTERFACE ASSEMBLED CABLE L-250 RG174 TERMINALS SMA F & MMCX 90 M Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 55 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 15. GE863 Interface This board allows easily interfacing the GE863 modules with the EVK2 and testing their functionalities; GE863 Interface Boards: GE863-QUAD or GE863-SIM (at left) and GE863-GPS (at right) 15.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount also: the SIMCARD Holder; the RESET Button the ON Button; the STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 56 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 15.2. Content of the kits Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. 15.2.1. GE863-PY/QUAD version Description GE863 INTERFACE BOARD 2 PIN JUMPER FEMALE CONN 15.2.2. GE863-GPS version Description GE863-GPS INTERFACE BOARD 2 PIN JUMPER FEMALE CONN 15.2.3. Quantity 1 2 GE863-SIM version Description GE863-SIM INTERFACE BOARD 2 PIN JUMPER FEMALE CONN 15.3. Quantity 1 2 Quantity 1 2 Interface connectors The following connectors are available in any version: GSM RF connector (SMA Female) 2 male connectors (4 pins each one: PL101, PL102) to select the Serial port configuration 2 female connectors (40 pins each one: SO101, SO106) to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines) 2 male connectors (30 pins each one: PL103, PL104), on which it is possible to connect external devices like user's application, Telit extension boards, measurements equipment or other tools 15.4. Additional components for GPS version The following components are available only in GPS version (P/N 3990250671): GPS RF connector (SMA Female) USB B-type connector and its circuitry (see schematic 30276SE11151A) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 57 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Connectors displacement on GE863-GPS 15.5. USB connector The USB interface provides 2 serial ports that are related to the NMEA serial port and SIRFBinary serial port of GE863-GPS module. It is possible to select if the SIRF Binary serial port will be available on the USB connector or directly connected to the second serial port of the modem (CONTROLLED MODE). For setting refer to paragraphs 16.7.1, 16.7.2.1, 16.7.2.2. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 58 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 GE863-GPS Serial ports block diagram 15.6. Serial port configuration To switch the serial lines you must short-circuit the PL101-PL102 connectors by 2 contacts jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 59 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 15.6.1. GE863-PY/QUAD The 2 contacts jumpers have to be fitted between pin1&pin2 of PL101-PL102 connectors. This carries out the Python Debug Port on Trace Port of EVK2. Jumpers setting for GE863-PY/QUAD 15.6.2. GE863 - GPS The 2 contacts jumpers have to be fitted between pin2&pin3 or pin3&pin4 of PL101-PL102 connectors. "CONTROLLED MODE" This set the SIRF Binary to serial port of the modem. (Typical application Design) Jumpers setting for SIRF BINARY port connected to MODEM port 2 NOTE: All AT GPS commands are available in this configuration Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 60 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 "SEPARATED SERIAL PORT" This set the SIRF Binary available on the USB connector. Jumpers setting for SIRF BINARY port available on USB connector NOTE: In this configuration soma AT GPS commands are not available. Refer to AT Commands Reference User Guide. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 61 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 15.7. ANTENNA connectors 15.7.1. GPS ANTENNA connector An active GPS antenna should be connected to SO104; the GPS section provides the DC feeding. WARNING: Don't connect a GSM antenna on this connector 15.7.2. GSM ANTENNA connector A GSM antenna should be connected to SO103. 15.7.3. RFU ANTENNA connector On PCB there is the mounting possibility of a further RF connector (SO105): it is related to future implementation. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 62 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 16. GE864 Interface This board allows easily interfacing the GE864 modules with the EVK2 and testing their functionalities. No settings are needed. GE864 Interface Board 16.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to following missing components: * * * * mount the the SIMCARD Holder; the RESET Button the ON Button; the STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 63 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 16.2. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each one: PL102, PL103), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 16.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GE864 INTERFACE Quantity 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 64 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17. GE864-GPS Interface This board allows testing the functionalities and performance of the GE864-GPS module. GE864-GPS Interface Board 17.1. Part numbering This board comes in three different configurations, each characterized by its own part number, depending on the module it contains. In the following paragraphs we will refer to them using an identifier according to the table below: Part number 3990250820 3990250821 3990250822 Identifier cs1439b cs1439b-A cs1439b-B Module mounted cs1479 cs1446 cs1485a Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 65 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17.2. Stand-alone setup The interface can be used without the EVK2, in this case the following components have to be soldered on the board: the GSM-RESET button the GSM-ON button the STATUS led and its load resistor. 17.3. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each: PL101 and PL102), to connect external devices, user's applications, Telit extension boards, measurement equipment or other tools; PL102 can also be used to select particular configurations between the GSM module's GPIOs and the GPS module 2 female connectors (40 PTH pins each one: SO101 and SO104), to connect the interface to the EVK2 mother board (power supply lines, serial in/out lines, audio in/out lines) 1 male connector (3 PTH pins: PL104), to select an enable signal for the external GPS LNA 1 male connector (2 PTH pins: PL105), in order to allow inserting an ammeter in series with the supply, in order to monitor the module's current consumption 1 GSM RF connector (SMA Female: SO105) 1 GPS RF connector (SMA Female: SO103) 1 JTAG connector (PL103, not mounted) 1 male connector (12 PTH pins: PL201), to select one of the available configurations for the Serial and USB ports. 17.4. Contents of the kit Please check out the contents of your interface kit. If any of the following items is missing, contact your Telit supplier. Description GE864-GPS INTERFACE JUMPERS Quantity 1 13 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 66 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17.5. Power supply The module (but not the whole interface) receives its power supply from PL105: this jumper must always be plugged in, except when a series measurement instrument is needed. Jumper for VBATT. 17.6. GPS external LNA enable signal The module contains an internal LNA for the GPS antenna that is enabled by default. The user can though decide to use an external LNA: this option is selected by means of a software command, which puts the internal LNA in a low gain mode and provides an additional signal to enable the external LNA. The interface can provide a bias for the external LNA, and the user can choose whether to enable it by this signal or to leave it always enabled, by means of a jumper on PL104, as shown in the picture below. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 67 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Jumper on PL104. 17.7. Serial port configuration By means of proper jumper connections on PL201, three different configurations for serial outputs can be selected. These configurations are mutually exclusive. GE864-GPS Interface Board serial connections Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 68 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17.7.1. ASC1 to RS-232 This configuration connects the ASC1 UART to the Trace serial connector of the EVK2. ASC1 to RS-232 (Trace) configuration 17.7.2. GPS to ASC1 (internal host controlling configuration) This configuration directly connects the host GSM module to the GPS receiver, thus setting the GPS receiver in Controlled Mode. GPS to ASC1 configuration Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 69 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 WARNING: Other than the ASCII UART, the user must also connect the host module's GPIOs to the corresponding signals of the GPS receiver (as explained in the next paragraphs). 17.7.3. GPS to RS-232 (external host controlling configuration) This configuration allows sending the GPS output to the Trace serial connector of the EVK2. GPS to RS-232 (Trace) configuration 17.7.4. GPS to USB The NMEA sentences can be redirected to EVK2's USB port by setting PL201 as explained in the Figure 37, i.e. connecting the NMEA line with the RS-232, and at the same time setting the EVK2 serial line on USB Mode, as shown in Paragraph 7.1 of this document. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 70 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17.8. GPIO settings The interface allows choosing among different options for driving the GPS control signals: Using the GPIOs of the GSM module Using an external host Manually controlling the signals by plugging a jumper. The last option is not available for every signal and every configuration; please refer to the schematics of the interface for more details. The choice among the options can be made by PL102, as detailed below. 17.8.1. Internal host controlling configuration The following settings on PL101 and PL102 allow selecting the internal host configuration. Two different cases have to be considered: cs1439b-A cs1439b and cs1439b-B Refer to the beginning of this chapter for the correspondence between board part number and mounting options. Settings for PL101 and PL102: internal host,cs1439b-A Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 71 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Settings for PL101 and PL102: internal host, cs1439b and cs1439b-B Note that jumper settings are detailed in the pictures above. The signal connected to pin10 of PL102 is no longer available, and it is recommended to tie it to ground by plugging a jumper between pin10 & pin12 of PL102. 17.8.2. External host controlling configuration When an external host is used to drive the GPS module, two different cases have to be considered: cs1439b-A cs1439b and cs1439b-B Refer to the beginning of this chapter for the correspondence between board part number and mounting options. Two jumpers must be plugged, between pin14 & pin16 of PL101 and pin10 & pin12 of PL102. Additionally, the host GPIOs must be connected to PL102 as shown in the pictures below. Note that in this configuration the signal on pin10 of PL102 is no longer available and it must be connected to ground by plugging a jumper on pin10 & pin12 of PL102. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 72 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Settings for PL101 and PL102: external host, cs1439b-A. Settings for PL101 and PL102: external host, cs1439b and cs1439b-B. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 73 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 17.9. Antenna connectors 17.9.1. GSM antenna connector A GSM antenna must be connected to SO105. 17.9.2. GPS antenna connector A GPS antenna must be connected to SO103. WARNING: Don't connect a GSM antenna on this connector Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 74 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 18. GE865 - SE867 AGPS Interface This board allows testing the functionalities and performance of the GE865 and SE867 modules interconnected according to Telit guidelines. GE865/SE867-AGPS Interface Board 18.1. Stand-alone setup The interface can be used without the EVK2, in this case the following components have to be soldered on the board: the RESET button the ON button the STATUS led and its load resistor. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 75 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 18.2. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each: PL101 and PL102), to connect external devices, user's applications, Telit extension boards, measurement equipment or other tools 2 female connectors (40 PTH pins each one: SO101 and SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines) 1 male connector (5 PTH pins: PL104), which makes available in one place all GPIOs related to PCM 1 GSM RF connector (SMA Female: SO103) 1 GPS RF connector (SMA Female: SO201) 1 JTAG connector (PL103, not mounted) 2 male connectors (2 PTH pins: PL203, PL205, not mounted), which allow to manually control some functions, therefore freeing the corresponding GPIOs for other uses 1 male connector (2 PTH pins: PL204) by means of which the user can manually disable VIN_GPS 4 male connectors (2 PTH pins: PL202, PL207; 3 PTH pins: PL201, PL206) to select one particular UART connection configuration. 18.3. Contents of the kit Please check out the contents of your interface kit. If any of the following items is missing, contact your Telit supplier. Description GE865/SE867-AGPS INTERFACE JUMPERS Quantity 1 5 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 76 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 18.4. Serial connections By means of proper jumper connections on PL201, PL202, PL206, and PL207, three different configurations for serial outputs can be selected. 18.4.1. GSM to GPS (GSM controlling configuration) This configuration is achieved by plugging a female jumper connector on pin1 & pin2 of both PL201 and PL206. It allows to connect the GE865 UART with SE867-AGPS UART, thereby putting the board in the so-called controlled mode. No connection with the EVK2 RS-232 Trace is present. Jumpers in controlled mode configuration. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 77 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 18.4.2. GSM to Trace This configuration is realized by plugging a female jumper connector on pin2 & pin3 of both PL201 and PL206. It allows redirecting the GE865 UART to the EVK2 RS-232 Trace. No connection with the SE867 UART is present. Jumpers in GSM to Trace configuration. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 78 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 18.4.3. GPS to Trace(external host controlling configuration) This configuration is achieved by plugging two female jumper connectors on PL202 and PL207. It allows redirecting the SE867 UART to the EVK2 RS-232 Trace. No connection with the GE865 UART is present. Jumpers in GPS to Trace configuration. 18.5. Antenna connectors 18.5.1. GSM antenna connector A GSM antenna must be connected to SO103. 18.5.2. GPS antenna connector A GPS antenna must be connected to SO201. WARNING: Don't connect a GSM antenna on this connector Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 79 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19. GE865 - JF2 Interface This board allows testing the functionalities and performance of the GE865 and JF2 modules interconnected according to Telit guidelines. GE865/JF2 Interface Board. 19.1. Stand-alone setup The interface can be used without EVK2 and in this case the following components have to be soldered to the board: - RESET button - GSM ON/OFF button - GSM STATUS led and its load resistor Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 80 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.2. Interface connectors The following connectors are available: - 2 male connectors (30 PTH pins each: PL301 and PL302), to connect external devices, user's applications, Telit extension boards, measurement equipment or other tools; PL301 can also be used to select particular configurations between the GSM module's GPIOs and the GPS module - 2 female connectors (40 PTH pins each one: SO301 and SO302), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines) - 1 GSM RF connector (SMA Female: SO105) - 1 GPS RF connector (SMA Female: SO201) - 1 JTAG connector (PL103, not mounted) - 1 male connector (3 PTH pins: PL202), to select an enable signal for the external GPS LNA, - 1 male connector (12 PTH pins: PL303), to select one of the available configurations for the Serial and USB ports. - 1 male connector (2 PTH pins: PL105), that can be used to insert an ammeter in series with the supply, in order to monitor the module's current consumption, - 1 male connector (9 PTH pins: PL304), in order to set the data format between USB or SSC0 lines to send to EVK2. 19.3. Contents of the kit Please check out the contents of your interface kit. If any of the following items is missing, contact your Telit supplier. Description GE865/JF2 INTERFACE JUMPERS 19.4. Quantity 1 15 Power supply The GE865 module (but not the whole interface) receives its power supply from PL105: this jumper must always be plugged on except when a series measurement instrument is needed. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 81 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Jumper for VBATT. 19.5. GPS external LNA enable signal The module contains an internal LNA for the GPS antenna. The user can though decide to use an external LNA: this option is selected by means of a software command, which puts the internal LNA in a low gain mode and provides an additional signal to enable the external LNA. The interface can provide a bias for the external LNA, and the user can choose whether to enable it by this signal or to leave it always enabled, by means of a jumper on PL202, as shown in the picture below. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 82 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 EXTERNAL LNA CONTROLLED BY ENABLE SIGNAL EXTERNAL LNA ALWAYS ON . Jumper selection on PL202. In order to use the External LNA controlled by the GE865 signal the user musts insert a jumper in pins 14-16 of PL301. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 83 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.6. Serial port configuration By means of proper jumper connections on PL303, it is possible to choose different configurations for serial or USB outputs. These configurations are mutually exclusive. GE865 JF2- PL303 GE865-JF2 Interface Board cs1521 GE865-JF2 Interface Board serial connections Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 84 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.7. GSM to Trace This configuration connects the GSM to the RS232 serial connector of the EVK2. GSM to RS-232 (Trace) configuration 19.8. GPS to Trace This configuration allows sending the GPS output to the Trace serial connector of EVK2 by means of transceivers. GPS to RS232 (Trace) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 85 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.9. GSM to USB This configuration connects the GSM to the USB connector of the EVK2. GSM to USB 19.10. GPS to USB The NMEA sentences can be redirected to the EVK2's USB port by setting the PL303 as explained in the Figure 53, i.e. connecting the NMEA line with the RS-232, and at the same time setting the EVK2 serial line on USB mode, as showed in Paragraph 7.1 of this document. GPS to USB Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 86 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.11. GPS to GSM (internal host controlling configuration) This configuration directly connects the host GSM module to the GPS receiver, thus setting the GPS receiver in Controlled Mode. GPS to GSM configuration 19.12. GPIO settings The interface allows choosing among different options for driving the GPS control signals: - Using the GPIOs of the GSM module - Using an external host - Manually controlling the signals by plugging jumpers. The last option is not available for every signal and every configuration; please refer to the schematics of the interface for more details. The choice among the options can be made by PL301 and PL302, as detailed below. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 87 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.12.1. Internal host controlling configuration The following settings on PL301 and PL302 allow selecting the internal host configuration. Settings for PL301 and PL302: internal host controlling Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 88 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.12.2. External host controlling configuration The following settings on PL301 and PL302 allow selecting the external host configuration. Settings for PL301 and PL302: external host. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 89 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.13. GPS serial interface setting GPS module has the capability to operate in serial UART mode, SPI mode or I2C mode depending upon how the JF2 GPIO6 and GPIO7 pins are strapped at power up. In the table below is shown the configuration set in PL302 to select the type of serial interface: MODE UART I2C SPI GPS GPIO n.6 1-2 pins shorted in PL302 Float Float GPS GPIO n.7 Float 15-16 pins shorted in PL302 Float If you connect JF2 module with GE865 module you must use UART configuration. Using an external host, if you want use I2C configuration, you need to plugging on PL302 two jumpers in positions 3-4 and 5-6 in order to connect pull-ups in SDA and SCL lines. 19.14. MEMS Sensor/EEPROM Interface The DR I2C port of JF2 is used for connecting to MEMS sensors, such as accelerometer or magnetometer. GPS GPIO n.4 With sensor Float Without sensor 13-14 pins shorted in PL302 19.15. GPS GPIO n.0 3-4 pins shorted in PL302 Float GPS GPIO n.1 5-6 pins shorted in PL302 Float GPS power-on management JF2 module power on/off can be controlled by an external host signal or it is possible to have the automatic module transition to the full power state by tying the SYSTEM-ON output to the ON-OFF input. The table below shows how to set these two options: 10-12 and 19-21 pins shorted in PL302 11-12 pins shorted in PL302 Power Mode Full power mode ON/OFF controlled by an external host signal Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 90 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 19.16. Antenna connectors 19.16.1. GSM antenna connector A GSM antenna must be connected to SO105. 19.16.2. GPS antenna connector A GPS antenna must be connected to SO201. WARNING: Don't connect a GSM antenna on the GPS antenna connector Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 91 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20. GL865 - SL869/JN3 Interface This board allows testing the functionalities and performance of the GL865-V3 and SL869/JN3 modules interconnected according to Telit guidelines. GL865 - SL869/JN3 Interface Board. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 92 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.1. Stand-alone setup The interface can be used without EVK2 and in this case the following components have to be soldered to the board: - GSM RESET button - GSM ON/OFF button - GPS STATUS led and its load resistor - GSM STATUS led and its load resistor (both NO MOUNT) 20.2. Interface connectors The following connectors are available: - 2 male connectors (30 PTH pins each: PL300 and PL301), to connect external devices, user's applications, Telit extension boards, measurement equipment or other tools - 2 female connectors (40 PTH pins each one: SO300 and SO301), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines) - 1 GSM RF connector (SMA Female: SO101) - 1 GPS RF connector (SMA Female: SO201) - 1 JTAG connector (PL100, not mounted) - 1 male connector (3 PTH pins: PL200), to select an enable signal for the external GPS LNA, - 1 male connector (12 PTH pins: PL302), to select one of the available configurations for the Serial and USB ports. - 2 male connector (2 PTH pins: PL101, PL201), that can be used to insert an ammeter in series with the supply, in order to monitor respectively the current consumption of GL865 and SL869/JN3 modules. 20.3. Contents of the kit Please check out the contents of your interface kit. If any of the following items is missing, contact your Telit supplier. Description GL865 - SL869/JN3 INTERFACE JUMPERS Quantity 1 10 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 93 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.1. Power supply The GL865 module (but not the whole interface) receives its power supply from PL101: this jumper must always be plugged on except when a series measurement instrument is needed. The SL869/JN3 module receives its power supply from PL201: this jumper must always be plugged on except when a series measurement instrument is needed. Jumper for VBATT. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 94 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.2. GPS external LNA enable signal The module contains an internal LNA for the GPS antenna. The user can though decide to use an external LNA: this option is selected by means of a software command, which puts the internal LNA in a low gain mode and provides an additional signal to enable the external LNA. The interface can provide a bias for the external LNA by means of a jumper on PL202, and the user can choose whether to enable it by this signal or to leave it always enabled, by means of a jumper on PL200, as shown in the picture below. EXTERNAL LNA ALWAYS ONLNA EXTERNAL CONTROLLED BY ENABLE SIGNAL Jumper selection on PL200, PL202 for antenna bias. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 95 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.3. Serial port configuration By means of proper jumper connections on PL302, it is possible to choose different configurations for serial or USB outputs. These configurations are mutually exclusive. SL869/JN3 GL865-SL869/JN3 INTERFACE EVK2 GL865 - SL869/JN3 Interface Board serial connections Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 96 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.4. GSM to Trace This configuration connects the GSM to the RS232 serial connector of the EVK2. GSM to RS-232 (Trace) configuration 20.5. GPS to Trace This configuration allows sending the GPS output to the Trace serial connector of EVK2 by means of transceivers GPS to RS-232 (Trace) configuration Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 97 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.6. GSM to USB This configuration connects the GSM to the USB connector of the EVK2. GSM to USB configuration 20.7. GPS to USB This configuration connects the GPS to the USB connector of the EVK2. GPS to USB configuration Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 98 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.8. GPS to GSM (internal host controlling configuration) This configuration directly connects the host GSM module to the GPS receiver, thus setting the GPS receiver in Controlled Mode. GPS to GSM configuration Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 99 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.9. GPIO settings The interface allows choosing among different options for driving the GPS control signals: - Using the GPIOs of the GSM module - Using an external host - Manually controlling the signals by plugging jumpers. The last option is not available for every signal and every configuration; please refer to the schematics of the interface for more details. The choice among the options can be made by PL300, PL301 and as detailed below. 20.9.1. Internal host controlling configuration The following settings on PL300 and PL301 allow selecting the internal host configuration. GPS_BOOT GPS_PPS GPS_EN Settings for PL300 and PL301: internal host controlling Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 100 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.9.2. External host controlling configuration The following settings on PL300 and PL301 allow selecting the external host configuration. VTRASL GPS_BOOT GPS_EN GPS_PPS Settings for PL300 and PL301: external host. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 101 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20.10. Antenna connectors 20.10.1. GSM antenna connector A GSM antenna must be connected to SO101. 20.10.2. GPS antenna connector A GPS antenna must be connected to SO201 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 102 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 21. GC864 Interface This board allows easily interfacing the module with the EVK2 and testing its functionalities; any version of GC864 can be inserted. No settings are needed. GC864 Interface Board 21.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount also: the SIMCARD Holder; the RESET Button the ON Button; the STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 103 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 21.2. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each one: PL102, PL103), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines). 21.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GC864 INTERFACE ASSEMBLED CABLE L-200 COAX 0.8 TERMINALS GSC & SMA F PANNEL Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 104 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 22. GC864-C2 family Interface This board allows easily interfacing the module with the EVK2 and testing its functionalities; any version of GC864-C2 can be inserted. No settings are needed. GC864-C2 Interface Board 22.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount the following missing components: the SIMCARD Holder ; the ON Button ; the STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 105 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 22.2. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each one: PL101, PL102), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 22.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GC864-C2 INTERFACE ASSEMBLED CABLE L-250 RG174 TERMINALS SMA F & MMCX 90 M Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 106 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 23. GE865 Interface This board allows easily interfacing the GE865 modules with the EVK2 and testing their functionalities; No settings are needed. GE864 Interface Board 23.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount the following missing components: the RESET Button the ON Button; the STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 107 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 23.2. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each one: PL102, PL103), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 23.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GE865 INTERFACE Quantity 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 108 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 24. GL865 Interface This board allows easily interfacing the GL865 modules with the EVK2 and testing their functionalities; No settings are needed. GL865 Interface Board 24.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount the following missing components: the RESET Button the ON Button; the STATUS LED and its load resistance. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 109 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 24.2. Interface connectors The following connectors are available: 2 male connectors (30 PTH pins each one: PL102, PL103), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO102), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 24.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GL865 INTERFACE Quantity 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 110 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 25. UC864 family Interface This board allows easily interfacing the UC864/CC864 modules with the EVK2 and testing their functionalities; No settings are needed. For more information please refer to 1vv0300771 (UC864/CC864 Interface Board User Guide) UC864 Interface Board 25.1. Stand-alone setup If you need to use the interface out of EVK2 (Stand-alone setup) you have to mount the following missing components: the RESET Button the ON Button; Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 111 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 25.2. Interface connectors The following connectors are available: male connectors (30 PTH pins each one: PL101, PL102), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; female connectors (40 PTH pins each one: CON102, CON103), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 2 USB connectors (selectable by Jumper Setting) For additional details on the connections and the possible Jumper settings please refer to the Interface board User guide (1vv0300771) 25.3. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description UC864/CC864 INTERFACE Quantity 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 112 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 26. HE910 family Interface This board allows easily interfacing the HE910 modules with the EVK2 and testing their functionalities; No settings are needed. HE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 113 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 26.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 26.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the HE910 USB 2.0 port. 3 RF connectors for GSM/UMTS Antenna (SO103), Receiver Diversity Antenna (SO105) and GPS Antenna (SO102) 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304, PL102, PL203, PL204) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 114 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 26.3. Antenna connectors 26.3.1. GSM/UMTS Antenna connector A GSM/UMTS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 26.3.2. Receiver Diversity Antenna connector A GSM/UMTS compatible antenna (Refer to the product's HW user guide) antenna could be connected to SO105. 26.3.3. GPS antenna connector A GPS antenna could be connected to SO102. Please refer to the product's HW user guide for the proper type. The GPS Antenna (if an active type) could be supplied with a dedicated LDO (3V DC) that could be set in the following way using the Jumpers on PL104. LDO Enabled by the HE910 Module. LDO Always Enabled WARNING: Don't connect a GSM/UMTS antenna on this connector Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 115 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 26.4. Expansion Connectors 26.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 116 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 26.4.2. PL303/PL304/PL305 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name TX_AUX RX_AUX SPI_CLK SPI_MRDY SPI_SRDY GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin# 1 2 Pin Name TX_AUX RX_AUX Pin# 1 2 3 Pin Name RESERVED VDD_IO VIO_1V8 PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) SPI SPI SPI PL304 Description Jumper to EVK2 Jumper to EVK2 PL305 Description Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 117 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 26.4.3. PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 26.4.4. Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the HE910 Interface. 26.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description HE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 118 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 27. UE910 family Interface This board allows easily interfacing the UE910 modules with the EVK2 and testing their functionalities; No settings are needed. UE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 119 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 27.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 27.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the UE910 USB 2.0 port. 1 RF connectors for GSM/UMTS Antenna (SO103) 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Antenna connectors Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 120 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 27.2.1. GSM/UMTS Antenna connector A GSM/UMTS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 27.3. Expansion Connectors 27.3.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 121 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 27.3.2. PL303/PL304/PL305 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name TX_AUX RX_AUX SPI_CLK SPI_MRDY SPI_SRDY GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin# 1 2 Pin Name TX_AUX RX_AUX Pin# 1 2 3 Pin Name RESERVED VDD_IO VIO_1V8 PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) SPI SPI SPI PL304 Description Jumper to EVK2 Jumper to EVK2 PL305 Description Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 122 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 27.3.3. PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 27.3.4. Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the UE910 Interface. 27.4. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description UE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 123 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 28. GE910 Interface This board allows easily interfacing the GE910 module with the EVK2 and testing their functionalities; No settings are needed. GE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 124 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 28.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 28.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the GE910 USB 2.0 port. 1 RF connectors for GSM/GPRS Antenna (SO103), 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304,PL305, PL102, PL203) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 125 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 28.3. Antenna connectors 28.3.1. GSM/GPRS Antenna connector A GSM/GPRS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 28.4. Expansion Connectors 28.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin# Pin Name 1 GPIO_01 2 3 4 5 6 7 8 9 10 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Jumper to EVK2 Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 126 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 28.4.2. PL303/PL304 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 28.4.3. Pin Name TX_AUX RX_AUX RESERVED RESERVED RESERVED GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin Name TX_AUX RX_AUX PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) PL304 Description Jumper to EVK2 Jumper to EVK2 PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 127 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 28.4.4. ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the GE910 Interface. 28.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 128 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 29. GE910-GNSS Interface This board allows easily interfacing the GE910-GNSS module with the EVK2 and testing their functionalities; No settings are needed. GE910-GNSS Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 129 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 29.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 29.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the GE910-GNSS USB 2.0 port. 2 RF connectors for GSM/GPRS Antenna (SO103) and GNSS antenna (SO102) 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304, PL305, PL102, PL104, PL203) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 130 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 29.3. Antenna connectors 29.3.1. GSM/GPRS Antenna connector A GSM/GPRS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 29.3.2. GNSS antenna connector A GNSS antenna could be connected to SO102. Please refer to the product's HW user guide for the proper type. The GNSS Antenna (if an active type) could be supplied with a dedicated LDO (3V DC) that could be set in the following way using the Jumpers on PL104. LDO Enabled by the HE910 Module. LDO Always Enabled Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 131 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 29.4. Expansion Connectors 29.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin# Pin Name 1 GPIO_01 2 3 4 5 6 7 8 9 10 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Jumper to EVK2 Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 132 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 29.4.2. PL303/PL304 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 29.4.3. Pin Name TX_AUX RX_AUX RESERVED RESERVED RESERVED GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin Name TX_AUX RX_AUX PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) PL304 Description Jumper to EVK2 Jumper to EVK2 PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 133 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 29.4.4. ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the GE910-GNSS Interface. For the GNSS capabilities refer to GE910-GNSS Hardware User Guide. 29.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GE910-GNSS INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 134 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 30. GE910-QUAD V3 Interface This board allows easily interfacing the GE910-QUAD V3 module with the EVK2 and testing their functionalities. No settings are needed. GE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 135 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 30.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 30.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the GE910 USB 2.0 port. 1 RF connectors for GSM/GPRS Antenna (SO103), 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304,PL305, PL102, PL203) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 136 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 30.3. Antenna connectors 30.3.1. GSM/GPRS Antenna connector A GSM/GPRS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 30.4. Expansion Connectors 30.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin# Pin Name 1 GPIO_01 2 3 4 5 6 7 8 9 10 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Jumper to EVK2 Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 137 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 30.4.2. PL303/PL304 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 30.4.3. Pin Name TX_AUX RX_AUX RESERVED RESERVED RESERVED GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin Name TX_AUX RX_AUX PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) PL304 Description Jumper to EVK2 Jumper to EVK2 PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 138 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 30.4.4. ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the GE910 Interface. 30.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 139 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31. DE910 family Interface This board allows easily interfacing the DE910 modules with the EVK2 and testing their functionalities; No settings are needed. DE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 140 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 31.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the DE910 USB 2.0 port. 3 RF connectors for CDMA Antenna (SO103), Receiver Diversity Antenna (SO105) and GPS Antenna (SO102) 1 RUIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304, PL102, PL203, PL204) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 141 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31.3. Antenna connectors 31.3.1. CDMA Antenna connector A CDMA compatible antenna (Refer to the product's HW user guide) must be connected to SO103. 31.3.2. Receiver Diversity Antenna connector A CDMA compatible antenna (Refer to the product's HW user guide) could be connected to SO105. 31.3.3. GPS antenna connector A GPS antenna could be connected to SO102. Please refer to the product's HW user guide for the proper type. The GPS Antenna (if an active type) could be supplied with a dedicated LDO (3V DC) that could be set in the following way using the Jumpers on PL104. LDO Enabled by the DE910 Module. LDO Always Enabled WARNING: Don't connect a CDMA antenna on this connector Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 142 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31.4. Expansion Connectors 31.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 143 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31.4.2. PL303/PL304/PL305 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name TX_AUX RX_AUX RESERVED RESERVED RESERVED GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin# 1 2 Pin Name TX_AUX RX_AUX Pin# 1 2 3 Pin Name RESERVED VDD_IO VIO_1V8 PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) PL304 Description Jumper to EVK2 Jumper to EVK2 PL305 Description Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 144 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 31.4.3. PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 31.4.4. Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the DE910 Interface. 31.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description DE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 145 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 32. CE910 family Interface This board allows easily interfacing the CE910 modules with the EVK2 and testing their functionalities. No settings are needed. CE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 146 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 32.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 32.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the CE910 USB 2.0 port. 1 RF connectors for CDMA Antenna (SO103) 1 RUIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304, PL102, PL203, PL204) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 147 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 32.3. Antenna connectors 32.3.1. CDMA Antenna connector A CDMA compatible antenna (Refer to the product's HW user guide) must be connected to SO103. 32.4. Expansion Connectors 32.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 148 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 32.4.2. PL303/PL304 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 32.4.3. Pin Name TX_AUX RX_AUX RESERVED RESERVED RESERVED GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin Name TX_AUX RX_AUX PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) PL304 Description Jumper to EVK2 Jumper to EVK2 PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 149 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 32.4.4. ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the CE910 Interface. 32.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description CE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 150 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 33. GL865 V3 Interface This board allows easily interfacing the GL865-DUAL V3 modules with the EVK2 and testing their functionalities. No settings are needed. GL865 V3 Interface Board 33.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 151 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 33.2. Interface connectors The following connectors are available: 1 male connector (30 SMT pins each one: PL102), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 RF connectors for GSM Antenna (SO103) 1 SIM Holder (SO102) A group of Male connectors (PL101, PL105, PL106, PL107) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 152 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 34. LE920 Interface This board allows easily interfacing the LE920 module with the EVK2 and testing their functionalities. No settings are needed. LE920 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 153 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 34.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 34.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the LE920 USB 2.0 port. 3 RF connectors for Main, Diversity, and GPS Antenna (SO105, SO107, SO108), 1 SIM Holder (SO204) A group of Male connectors (PL102, PL104), that provide the additional signals The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 154 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 34.3. Antenna connectors 34.3.1. Main Antenna connector A LTE/HsPA/GSM/GPRS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO105. 34.3.2. Diversity Antenna connector A LTE/HsPA diversity (secondary) compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO107. 34.3.3. GPS Antenna connector A GPS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO108. 34.4. Expansion Connectors 34.4.1. PL102/PL104 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Pin Name DVI RX DVI TX DVI_WA0 DVI_CLK GND REF_CLK GND RESERVED RESERVED RESERVED RESERVED GND NC NC GND GND RESERVED NC RESERVED PL102 Description Digital Audio Digital Audio Digital Audio Digital Audio Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 155 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20 21 22 23 24 25 26 27 28 29 30 Pin# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 TGPIO_04 RESERVED RESERVED RESERVED RESERVED TGPIO_01 RESERVED RESERVED NC GND RESERVED Pin Name TGPIO_05 TGPIO_07 NC NC TGPIO_08 TGPIO_09 TGPIO_10 TGPIO_03 RESERVED RESERVED RESERVED TGPIO_06 RESERVED RESERVED NC VAUX NC VRTC ADC1 ADC2 ADC3 RESERVED TGPIO_02 VBAT VBAT GND RESERVED RESERVED VBAT VBAT PL104 Description 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 156 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 34.4.2. ON_OFF & UNCONDITIONAL SHUTDOWN, RESET BUTTONS The 3 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN, and RESET lines of the module. 34.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description LE920 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 157 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 35. HE920 Family Interface This board allows easily interfacing the HE920 module with the EVK2 and testing their functionalities. No settings are needed. HE920 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 158 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 35.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 35.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the LE920 USB 2.0 port. 3 RF connectors for Main, Diversity, and GPS Antenna (SO105, SO107, SO108), 1 SIM Holder (SO204) A group of Male connectors (PL102, PL104), that provide the additional signals The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 159 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 35.3. Antenna connectors 35.3.1. Main Antenna connector A WCDMA/HsPA/GSM/GPRS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO105. 35.3.2. Diversity Antenna connector A WCDMA/HsPA diversity (secondary) compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO107. 35.3.3. GPS Antenna connector A GPS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO108. 35.4. Expansion Connectors 35.4.1. PL102/PL104 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Pin Name DVI RX DVI TX DVI_WA0 DVI_CLK GND REF_CLK GND RESERVED RESERVED RESERVED RESERVED GND NC NC GND GND RESERVED NC RESERVED PL102 Description Digital Audio Digital Audio Digital Audio Digital Audio Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 160 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 20 21 22 23 24 25 26 27 28 29 30 Pin# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 TGPIO_04 RESERVED RESERVED RESERVED RESERVED TGPIO_01 RESERVED RESERVED NC GND RESERVED Pin Name TGPIO_05 TGPIO_07 NC NC TGPIO_08 TGPIO_09 TGPIO_10 TGPIO_03 RESERVED RESERVED RESERVED TGPIO_06 RESERVED RESERVED NC VAUX NC VRTC ADC1 ADC2 ADC3 RESERVED TGPIO_02 VBAT VBAT GND RESERVED RESERVED VBAT VBAT PL104 Description 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 161 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 35.4.2. ON_OFF & UNCONDITIONAL SHUTDOWN, RESET BUTTONS The 3 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN, and RESET lines of the module. 35.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description HE920 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 162 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36. HE910 V2 family Interface This board allows easily interfacing the HE910 V2 modules with the EVK2 and testing their functionalities; No settings are needed. HE910 V2 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 163 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 36.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the HE910 V2 USB 2.0 port. 2 RF connectors for GSM/UMTS Antenna (SO103) and GPS Antenna (SO102) 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 164 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36.3. Antenna connectors 36.3.1. GSM/UMTS Antenna connector A GSM/UMTS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 36.3.2. GPS antenna connector A GPS antenna could be connected to SO102. Please refer to the product's HW user guide for the proper type. The GPS Antenna (if an active type) could be supplied with a dedicated LDO (3V DC) that could be set in the following way using the Jumpers on PL104. LDO Enabled by the HE910 V2 Module. LDO Always Enabled WARNING: Don't connect a GSM/UMTS antenna on this connector Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 165 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36.4. Expansion Connectors 36.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 166 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36.4.2. PL303/PL304/PL305 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name TX_AUX RX_AUX SPI_CLK SPI_MRDY SPI_SRDY GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin# 1 2 Pin Name TX_AUX RX_AUX Pin# 1 2 3 Pin Name RESERVED VDD_IO VIO_1V8 PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) SPI SPI SPI PL304 Description Jumper to EVK2 Jumper to EVK2 PL305 Description Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 167 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 36.4.3. PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 36.4.4. Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the UE910 Interface. 36.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description HE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 168 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 37. UE910 V2 family Interface This board allows easily interfacing the UE910 V2 modules with the EVK2 and testing their functionalities; No settings are needed. UE910 V2 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 169 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 37.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 37.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the UE910 V2 USB 2.0 port. 2 RF connectors for GSM/UMTS Antenna (SO103) and GPS Antenna (SO102) 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 170 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 37.3. Antenna connectors 37.3.1. GSM/UMTS Antenna connector A GSM/UMTS compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 37.4. Expansion Connectors 37.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 171 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 37.4.2. PL303/PL304/PL305 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name TX_AUX RX_AUX SPI_CLK SPI_MRDY SPI_SRDY GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin# 1 2 Pin Name TX_AUX RX_AUX Pin# 1 2 3 Pin Name RESERVED VDD_IO VIO_1V8 PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) SPI SPI SPI PL304 Description Jumper to EVK2 Jumper to EVK2 PL305 Description Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 172 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 37.4.3. PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 37.4.4. Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO ON_OFF & UNCONDITIONAL SHUDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the UE910 Interface. 37.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description UE910 V2 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 173 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 38. CL865 Interface This board allows easily interfacing the CL865 modules with the EVK2 and testing their functionalities. No settings are needed. CL865 Interface Board 38.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 174 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 38.2. Interface connectors The following connectors are available: 1 male connector (30 SMT pins each one: PL102), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 RF connectors for CDMA Antenna (SO103) 1 SIM Holder (SO102) A group of Male connectors (PL101, PL105, PL106, PL107) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 175 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 38.3. Antenna connectors 38.3.1. CDMA Antenna connector A CDMA compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 38.4. Expansion Connectors 38.4.1. PL101 The connector is carrying the following signals: Pin# 1 2 3 4 5 6 38.4.2. Pin Name VAUX NC SDA SCL VBATT GND PL301 Description VAUX/PWRMON GPIO07 Configurable GPIO (I2C SDA) GPIO08 Configurable GPIO (I2C SCL) PL106 The connector is carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 11 12 Pin Name VBATT DVI_RX NC DVI_WA0 VAUX DVI_TX BUZZER DVI_CLK STAT_LED GND NC NC PL303 Description Digital Audio Interface (RX) Digital Audio Interface (WA0) VAUX/PWRMON Digital Audio Interface (TX) GPIO07 Configurable GPIO Digital Audio Interface (CLK) GPIO08 Configurable GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 176 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 38.4.3. PL107 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 Pin Name EAR_HF+ EAR+ EAR_HFEARMIC_HF+ MIC_HFMICMIC+ PL102 Description Audio output path Audio output path Audio output path Audio output path Audio input path Audio input path Audio input path Audio input path The connector allows to isolate audio path going to EVK in order to permit to use the dedicated audio test points on the interface. 38.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description CL865 INTERFACE Quantity 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 177 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39. GE866-QUAD Interface This board allows easily interfacing the GE866-QUAD modules with the EVK2 and testing their functionalities. No settings are needed. GE866-QUAD Interface Board 39.1. Stand-alone setup The jumper setting is ready, permitting the standalone use. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 178 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39.2. Interface connectors The following connectors are available: 1 male connector (30 SMT pins each one: PL102), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 SMT pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); - 1 RF connectors for GSM Antenna (SO103) a group of Male connectors (PL101, PL103, PL104, PL108) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). 1 male connector (3 SMT pins, 2 mm pitch: PL105). Jumper on pins 1-2 enables the serial interface only when the GE866-DUAL is powered on. Otherwise, jumper on pin 2-3 will set the serial interface always on. 2 3.5mm stereo audio jacks (SO401 and SO402) for connection of microphone and earphones. 2 male connectors (3 SMT pins, 2 mm pitch: PL401 and PL402) to provide additional audio input/output interfaces. 1 male connector (2 SMT pins, PL403) which enables the supply for the audio codec. The following picture shows connector's positions and the default setting for the jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 179 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39.3. Antenna connectors 39.3.1. GSM Antenna connector A GSM compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 39.4. Expansion Connectors 39.4.1. PL102 The connector carries the following signals: PL102 Pin# Pin Name Description 1 GPIO_05/RFTXMON RF transmission monitor 2 GPIO_06/ALARM/BUZZER Alarm or buzzer output 3 NC 4 NC 5 GPIO_07/STAT_LED Status pin 6 GPIO_01/I2S_WA0 Digital audio interface WA0 7 GPIO_04/I2S_CLK Digital audio interface Clock 8 GPIO_03/I2S_TX Digital audio interface TX 9 NC 10 NC 11 NC 12 GPIO_06/ALARM/BUZZER Alarm or buzzer output 13 NC 14 NC 15 NC 16 V_AUX/PWRMON Pull-up reference or ON monitor 17 DAC_OUT 10 bit DAC output, 1.8V max 18 VRTC Real Time Clock supply 19 ADC_IN 11 bit ADC converter, 0-1.2 20 NC 21 NC 22 NC 23 GPIO_02/I2S_RX Digital audio interface RX 24 NC 25 NC 26 NC 27 NC 28 NC 29 VBATT_IF 3.8V supply 30 GND Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 180 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39.4.2. PL101 The connector reroutes the balanced audio interfaces of GE866-QUAD (earphone and microphone) to the EVK2 jack connector. The connection is enabled by placing the respective jumpers. Note that use of PL101 makes sense only when the analog audio is selected. PL101 Jumpers on pins# 1-2 3-4 5-6 7-8 39.4.3. Connection name Description EAR_HF+ EAR_HFMIC_HFMIC_HF+ Balanced + earphone output Balanced - earphone output Balanced - microphone input Balanced + microphone input PL103 PL103 allows rerouting the stereo balanced audio signals to the earphones connectors (PL404 and SO402). The source that can be chosen is either the analog or the digital audio output of the GE866-QUAD. PL103 Jumpers on pins# 1-3 2-4 7-9 8-10 3-5 4-6 9-11 10-12 Signal Name Left Out + Right Out + Left Out Right Out Left Out + Right Out + Left Out Right Out - Description Analog audio Digital audio The connector allows isolating audio path going to EVK2 in order to use the dedicated audio test points/connectors on the GE866-QUAD interface. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 181 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39.4.4. PL104 PL104 enables the connections between GE866-QUAD and the on-board digital audio codec with the DVI or the I2C interface. Note that use of PL104 makes sense only when digital audio is required. PL104 Jumpers on pin# 1-2 3-4 5-6 7-8 9-10 11-12 39.4.5. Pin Name I2S_RX I2S_WA0 I2S_TX I2S_CLK I2C_SDA I2C_SCL Description DVI interface I2C interface PL108 The connector allows rerouting the balanced microphone signals to the module or to the digital audio codec. PL108 Jumpers Description on pin# 1-3 Analog audio 2-4 3-5 Digital audio 4-6 39.4.6. PL403 This connector enables the supply of the on-board audio codec. The jumper on pins 1-2 is required only when using the digital audio. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 182 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 39.4.7. PL401 and 402 These connectors provide an additional input/output for interfacing an earphone and a microphone to the GE866-QUAD. Pin 1 is, for both the connectors, the one closest to the upper side of the board (i.e. the side where the GSM antenna connector is mounted). Pin# 1 2 3 39.5. PL401 Microphone right GND Microphone left PL402 Earphone right GND Earphone left Audio selection The GE866-QUAD Interface allows choosing between digital or analog audio, as both are supported by the module. Digital audio has been configured as default Use the following table as quick reference for the desired setting. Connector Analog audio Digital audio PL105 1-2 PL106 1-2 PL107 1-2 Only for EVK2 audio PL101 no jumpers 1-2 3-4 5-6 7-8 PL108 1-3 2-4 3-5 4-6 PL103 1-3 2-4 7-9 8-10 3-5 4-6 9-11 10-12 PL104 no jumpers 1-2 3-4 5-6 7-8 9-10 11-12 PL403 no jumpers 1-2 39.6. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description GE866-QUAD Interface Jumpers Quantity 1 16 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 183 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 40. UL865 Interface This board allows easily interfacing the UL865 modules with the EVK2 and testing their functionalities. No settings are needed. UL865 Interface Board 40.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 184 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 40.2. Interface connectors The following connectors are available: 1 male connector (30 SMT pins each one: PL102), by which it is possible to connect external devices, user's application, Telit extension boards, measurements equipment or other tools; 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 RF connectors for GSM Antenna (SO103) 1 SIM Holder (SO102) A group of Male connectors (PL101, PL105, PL106) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 185 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 40.3. Antenna connectors 40.3.1. GSM Antenna connector A GSM compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 40.4. Expansion Connectors 40.4.1. PL101 The connector is carrying the following signals: Pin# 1 2 3 4 5 6 40.4.2. Pin Name VAUX NC GPIO07 GPIO08 VBATT GND PL301 Description VAUX/PWRMON GPIO07 Configurable GPIO GPIO08 Configurable GPIO PL106 The connector is carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 11 12 Pin Name VBATT DVI_RX NC DVI_WA0 VAUX DVI_TX GPIO7 DVI_CLK STAT_LED GND NC NC PL303 Description Digital Audio Interface (RX) Digital Audio Interface (WA0) VAUX/PWRMON Digital Audio Interface (TX) GPIO07 Configurable GPIO Digital Audio Interface (CLK) GPIO08 Configurable GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 186 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 40.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description UL865 INTERFACE Quantity 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 187 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 41. LE910 Interface This board allows easily interfacing the LE910 modules with the EVK2 and testing their functionalities; No settings are needed. LE910 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 188 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 41.1. Stand-alone setup The Jumper setting and the assembled components are ready permitting the standalone use. 41.2. Interface connectors The following connectors are available: 2 female connectors (40 PTH pins each one: SO101, SO104), to connect the interface to the EVK2 mother board circuits (power supply lines, serial in/out lines, audio in/out lines); 1 USB connector (SO202) related to the LE910 USB 2.0 port. 3 RF connectors for Main Antenna (SO103) , Diversity Antenna (SO105) and GNSS antenna (SO102) 1 SIM Holder (SO204) A group of Male connectors (PL301, PL302, PL303, PL304, PL305, PL102, PL104, PL203) that provide the additional signals (i.e. GPIOs) and could select the functions by Jumper setting (see the related document section/schematic for this). The following picture is showing the connector's positions and the default settings for the Jumpers. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 189 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 41.3. Antenna connectors 41.3.1. GSM/GPRS Antenna connector An LTE/WCDMA/GSM compatible antenna (Refer to the product's HW user guide) antenna must be connected to SO103. 41.3.2. GNSS antenna connector A GNSS antenna could be connected to SO102. Please refer to the product's HW user guide for the proper type. The GNSS Antenna (if an active type) could be supplied with a dedicated LDO (3V DC) that could be set in the following way using the Jumpers on PL104. LDO Enabled by the LE910 Module. LDO Always Enabled Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 190 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 41.4. Expansion Connectors 41.4.1. PL301/PL302 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name STAT_LED NC RESERVED NC NC NC C125/RING C107/DSR C109/DCD RESERVED Pin# Pin Name 1 GPIO_01 2 3 4 5 6 7 8 9 10 GPIO_02 GPIO_03 GPIO_04 GPIO_06 GPIO_07 C125/RING C107/DSR C109/DCD RESERVED PL301 Description Status Led PL302 Description Jumper to EVK2 Default function is Status Led Jumper to EVK2 Jumper to EVK2 Jumper to EVK2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 191 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 41.4.2. PL303/PL304 The connectors are carrying the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin# 1 2 41.4.3. Pin Name TX_AUX RX_AUX RESERVED RESERVED RESERVED GPIO_08 GPIO_09 GPIO_10 RESERVED NC Pin Name TX_AUX RX_AUX PL303 Description Auxiliary serial port (TX) Auxiliary serial port (RX) PL304 Description Jumper to EVK2 Jumper to EVK2 PL102 The connector is providing the following signals: Pin# 1 2 3 4 5 6 7 8 9 10 Pin Name VAUX/PWRMON VRTC RESERVED RESERVED RESERVED GPIO_05 RESERVED RESERVED RESERVED GND PL102 Description Auxiliary supply / Power On Indicator RTC Backup GPIO Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 192 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 41.4.4. ON_OFF & UNCONDITIONAL SHUTDOWN BUTTONS The 2 Buttons present on the Interface should be used to control the Power ON and UNCONDITIONAL SHUTDOWN lines of the module. The 2 Buttons on the EVK2 could not be used with the LE910 Interface. For the GNSS capabilities refer to LE910 Hardware User Guide. 41.5. Content of the kit Please check out the contents of your interface kit; if any of the items is missing, please contact your supplier. Description LE910 INTERFACE MINI USB CABLE Quantity 1 1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 193 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42. GPIO ports A certain number of GPIO ports (General Purpose Input/Output) are available on every Telit Module Interface Board, giving you the possibility to drive digital devices and report their own status. Some of these ports are dedicated. Refer to Telit Product Description and Telit Hardware User Guide to have all information about characteristics of every GPIO port. You can consult the following paragraphs to see the displacement of GPIO on every Interface Board. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 194 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1. GPIO location 42.1.1. GM862 Interface (Refer to schematic diagram 30276SE11150B) Position of GPIO ports on GM862 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 195 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Note on GM862-GPS version If you use this interface in conjunction with GM862-GPS version be careful that the following two pins of SO101 connector assume different functions, and precisely: Pin 2 = TX_GPS Pin 3 = RX_GPS Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 196 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.2. GE863-GPS Interface (Refer to schematic diagram 30276SE11151A) Position of GPIO ports on GE863-GPS interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 197 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Note on p/n 3990250684 and p/n 3990250685 GE863 (Refer to schematic diagrams 30276SE11151A-C, 30276SE11151A-D) If you use these interfaces the following two pins of PL104 connector assume different functions, and precisely: Pin 20 = ADC_IN2 Pin 21 = ADC_IN3 Pin 26 = N.C Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 198 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.3. GE863 Interfaces (p/n 3990250684 -3990250685-3990250703) Refer to schematic diagrams 3\0276SE11151A-C; 30276SE11151A-D; 30276SE11151AG Position of GPIO ports on GE863 interfaces Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 199 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.4. GE864 Interface (p/n 3990250672) (Refer to schematic diagram 30276SE1152B) Position of GPIO ports on GE864 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 200 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.5. GE864-GPS Interface (p/n 3990250822) (Refer to schematic diagram 30373SE11439b) Position of GPIO ports on GE864-GPS interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 201 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.6. GE865/SE867-AGPS Interface (p/n 3990250814) (Refer to schematic diagram 30311SE11433) Position of GPIO ports on GE865/SE867-AGPS interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 202 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.7. GC864 Interface (Refer to schematic diagram 30276SE111203B) Position of GPIO ports on GC864 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 203 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.8. GC864-C2 Interface (p/n 3990250683) (Refer to schematic diagram 30276SE11231X) Position of GPIO ports on GC864-C2 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 204 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.9. UC864 Interface J105 J106 J107 1 PL101 1 2 2 PL102 1 2 1 2 J108 ON/OFF SW2 UC864 CC864 GC864 CALL RESET SW1 SW101 HF USB_B J103 29 30 CON114 CON115 SUB MAIN 39 40 STAT LED HF SELECT 29 30 J102 USB_A 40 39 CON111 CON110 CON109 CON107 CON106 CON108 J101 Position of GPIO on connectors of UC864 interface PL101 PL102 N.C 1 2 N.C N.C N.C 3 5 4 6 N.C N.C N.C 7 8 N.C N.C 9 10 N.C TGPIO_05/ RTXMON PWRMON TGPIO_08 TGPIO_10/ PCM_TX TGPIO_16 1 2 3 5 4 6 TGPIO_07/ BUZZER RESERVED TGPIO_09 7 8 TGPIO_03 9 10 TGPIO_12 11 12 N.C N.C PCM_CLOCK N.C. 13 15 14 16 TGPIO_13 TGPIO_06/ ALARM USB_ID VAUX1 N.C 11 12 N.C N.C N.C TGPIO_18/ PCM_RX TGPIO_17/ PCM_SYNC TGPIO_15 TGPIO_11 TGPIO_01 TGPIO_22 N.C 13 15 14 16 17 18 N.C DAC_OUT 17 18 VRTC 19 20 TGPIO_04 ADC_IN1 19 20 ADC_IN2 21 23 25 27 29 22 24 26 28 30 TGPIO_14 TGPIO_19 TGPIO_20 N.C N.C ADC_IN3 TGPIO_02/JDR N.C RESERVED VBATT 21 23 25 27 29 22 24 26 28 30 TGPIO_21 N.C N.C RESERVED GND GPIO pin positioning Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 205 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.10. HE910 Interface Position of GPIO on connectors of HE910 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 206 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin# 1 2 3 Pin Name VDD_IO VIO_1V8 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) PL305 Description Reserved Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 207 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.11. GE910 Interface Position of GPIO on connectors of GE910 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 208 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin# 1 2 3 Pin Name VDD_IO VIO_1V8 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) PL305 Description Reserved Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 209 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.12. DE910 Interface Position of GPIO on connectors of DE910 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 210 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin# 1 2 3 Pin Name VDD_IO VIO_1V8 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) PL305 Description Reserved Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 211 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.13. CE910 Interface Position of GPIO on connectors of CE910 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 212 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 213 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.14. GL865 V3 Interface Position of GPIO on connectors of GL865 V3 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 214 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 Pin/Connector Pin 6 (PL102) / Pin 4 (PL106) Pin 23 (PL102) / Pin 2 (PL106) Pin 8 (PL102) / Pin 6 (PL106) Pin 7 (PL102) / Pin 8 (PL106) Pin 1 (PL102) Pin 12 (PL102) Pin 2 (PL102) / Pin 7 (PL106) / Pin 3 (PL101) Pin 5 (PL102) / Pin 9 (PL106) / Pin 4 (PL101) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 215 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.15. UL865 Interface Position of GPIO on connectors of UL865 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 216 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 Pin/Connector Pin 6 (PL102) / Pin 4 (PL106) Pin 23 (PL102) / Pin 2 (PL106) Pin 8 (PL102) / Pin 6 (PL106) Pin 7 (PL102) / Pin 8 (PL106) Pin 1 (PL102) Pin 12 (PL102) Pin 2 (PL102) / Pin 7 (PL106) / Pin 3 (PL101) Pin 5 (PL102) / Pin 9 (PL106) / Pin 4 (PL101) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 217 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.16. HE920 Family Interface Position of GPIO on connectors of HE920 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 218 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin/Connector Pin 25 (PL102) Pin 23 (PL104) Pin 8 (PL104) Pin 20 (PL102) Pin 1 (PL104) Pin 12 (PL104) Pin 2 (PL104) Pin 5 (PL104) Pin 6 (PL104) Pin 7 (PL104) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 219 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.17. HE910 V2 Interface Position of GPIO on connectors of HE910 V2 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 220 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin# 1 2 3 Pin Name VDD_IO VIO_1V8 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) PL305 Description Reserved Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 221 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.18. UE910 V2 Interface Position of GPIO on connectors of UE910 V2 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 222 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin# 1 2 3 Pin Name VDD_IO VIO_1V8 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) PL305 Description Reserved Input pin for the bus supply VIO supply at 1.8V Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 223 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.19. CL865 Interface Position of GPIO on connectors of CL865 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 224 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.20. GE866-QUAD Interface Layout of GE866-QUAD Interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 225 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 Pin/Connector Pin 6 (PL102) / Pin 3 (PL104) Pin 23 (PL102) / Pin 1 (PL104) Pin 8 (PL102) / Pin 5 (PL104) Pin 7 (PL102) / Pin 7 (PL104) Pin 1 (PL102) Pin 12 (PL102) / Pin 9 (PL104) Pin 5 (PL102) / Pin 11 (PL104) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 226 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 42.1.21. LE910 Interface Position of GPIO on connectors of LE910 interface Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 227 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 The connectors are carrying the following signals: Pin Name GPIO_01 GPIO_02 GPIO_03 GPIO_04 GPIO_05 GPIO_06 GPIO_07 GPIO_08 GPIO_09 GPIO_10 Pin/Connector Pin 1 (PL302) Pin 2 (PL302) Pin 3 (PL302) Pin 4 (PL302) Pin 6 (PL102) Pin 5 (PL302) Pin 6 (PL302) Pin 6 (PL303) Pin 7 (PL303) Pin 8 (PL303) Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 228 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43. SCHEMATICS In the following paragraphs the user can find the schematics related to all EVK2 boards, therefore to the Mother Board, to the Interface Boards and to the Extension Boards. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 229 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.1. EVK2 Mother Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 230 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 231 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 232 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 233 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 234 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.2. GM862 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 235 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.3. GE863 Interface Board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 236 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 NOTE: This sheet is related only to GPS version. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 237 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.4. GE864 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 238 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.5. GE864 Interface board - Automotive Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 239 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.6. GE864 Interface board - V2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 240 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.7. GE864-GPS Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 241 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 242 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.8. GE865/SE867-AGPS Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 243 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 244 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.9. GE865 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 245 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.10. GL865 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 246 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.11. GC864 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 247 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.12. GC864-C2 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 248 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.13. UC864 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 249 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 250 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.14. HE910/UE910 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 251 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 252 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 253 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 254 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.15. GE910 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 255 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 256 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 257 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 258 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.16. GE910-GNSS Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 259 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 260 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 261 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 262 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.17. GE910-QUAD V3 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 263 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 264 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 265 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 266 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.18. GE865 - JF2 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 267 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 268 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 269 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.19. GL865 - SL869/JN3 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 270 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 271 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 272 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.20. DE910 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 273 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 274 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 275 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 276 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.21. CE910 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 277 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 278 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 279 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 280 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.22. GL865 V3 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 281 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 282 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.23. LE920 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 283 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 284 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 285 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.24. HE920 family Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 286 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 287 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 288 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.25. HE910 V2 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 289 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 290 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 291 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 292 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.26. UE910 V2 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 293 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 294 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 295 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 296 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.27. CL865 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 297 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 298 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.28. GE866-QUAD Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 299 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 300 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 301 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 302 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.29. LE910 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 303 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 304 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 305 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 306 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 43.30. UL865 Interface board Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 307 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 308 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 44. Service and firmware update You can update the Telit Module firmware through the serial cables (RS232 or USB depending on module's characteristics) used for the communication with a PC. The firmware update can be done with a specific software tool provided by Telit that runs on windows based PCs. All levels are conformed to RS232 and V.24 standard and a PC serial port can be directly connected to this connector. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 309 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 45. SAFETY RECOMMENDATIONS READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas: Where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc Where there is risk of explosion such as gasoline stations, oil refineries, etc It is responsibility of the user to enforce the country regulation and the specific environment regulation. Do not disassemble the product; any mark of tampering will compromise the warranty validity. We recommend following the instructions of the hardware user guides for a correct wiring of the product. The product has to be supplied with a stabilized voltage source and the wiring has to be conforming to the security and fire prevention regulations. The product has to be handled with care, avoiding any contact with the pins because electrostatic discharges may damage the product itself. Same cautions have to be taken for the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM when the product is in power saving mode. The system integrator is responsible of the functioning of the final product; therefore, care has to be taken to the external components of the module, as well as of any project or installation issue, because the risk of disturbing the GSM network or external devices or having impact on the security. Should there be any doubt, please refer to the technical documentation and the regulations in force. Every module has to be equipped with a proper antenna with specific characteristics. The antenna has to be installed with care in order to avoid any interference with other electronic devices and has to guarantee a minimum distance from the people (20 cm). In case of this requirement cannot be satisfied, the system integrator has to assess the final product against the SAR regulation. The European Community provides some Directives for the electronic equipment introduced on the market. All the relevant information's are available on the European Community website: http://europa.eu.int/comm/enterprise/rtte/dir99-5.htm The text of the Directive 99/05 regarding telecommunication equipments is available, while the applicable Directives (Low Voltage and EMC) are available at: http://europa.eu.int/comm/enterprise/electr_equipment/index_en.htm Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 310 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 45.1. Disposal of this product in the European Union According to the WEEE Directive 2012/19/EU, the crossedout wheeled bin symbol on the product or on its packaging indicates that the product must not be disposed of with your other household waste. For equipment in private household, it's user's responsibility to dispose of his waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where you can drop off your waste equipment from private household for recycling, please contact your local city office, your household waste disposal service or the retailer where you purchased the product. As a producer of electronic devices, TELIT provides for the financing of the treatment and recycling of waste returned through the designated collection points in accordance with local requirements. If you have professional electronic equipment that you purchased directly from TELIT that you wish to have picked up for recycling, please contact us to receive necessary information and instructions. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Reference Directives: 2012/19/EU 45.2. Directive of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE). Disposal of this product in other countries outside the European Union Please dispose of this product in accordance with local requirements; contact your local authorities or dealer and ask for the correct method of disposal. Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 311 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 46. Document History Revision Rev 0 Date 05/01/2006 Changes First issue Rev 1 23/01/2006 Added PCB weight and dimensions pag.9 Added default setup pag.8 Correct mA/h with mAh pag.16 Unified the scripting "impedance coil" pag.19 and pag.20 Insert the power supply pag.7 Correct the serial lines scripting on block diagrams Insert the pin number of CS1150 connector. Correct the serial interfaces descriptions pag.7 Rev 2 31/01/2006 Modified in chapter 11.1 description of CS1170 pag. 29 Rev.3 14/04/2006 Rev.4 14/07/2006 Moved par.2.2 to par.4 and extended the STARTUP PROCEDURE to pag.11 Par.3 pag.9: Added mother boards block diagrams Pag.11: Correct GE863 Interface physical dimensions and added Dual Camera Interface physical dimensions. Moved par.4.4 and 4.5 to par.6.5 as Application Notes Moved par.7.3, 7.4 and 7.5 to par.9.3 as Warning Pag.26: Correct the Reset Button function description. Pag.20: Updated the Cross List Table From par.14 to par.18: Added interfaces description Removed all "Interface Board" "Printed Circuits Name" cross references Par.20: Added all electric diagrams. Replaced GC864 interface photo pag.46 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 312 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Rev.5 13/10/2006 Renamed figure from 38 to 42 Pag.2 Added products name and P/N for GE863-PY/QUAD interface and GC864-C2 interface 3.2.6 Added mechanical characteristics GC864-C2 interface 5.0 Correct Optically Positioning Guide system description 7.1 Correct the line selection description 6.5.2 Updated Current Charger footnote Generality: added note for the VGA camera Added in the Cross List GE864-PY/QUAD interface and GC864-C2 interface 15.2.1 Inserted P/N of GE863-GPS version Added GC864-C2 interface description 20.1 Corrected GPIO location and added p/n of GM862 interface 20.2 Corrected GPIO location and added p/n of GE863-GPS interface Corrected GPIO location and added p/n of GE863 interface Corrected GPIO location and added p/n of GE864 interface Corrected GPIO location and added p/n of GC864 interface Corrected GPIO location and added p/n of GC864-C2 interface Added GC864-C2 interface Schematic GM862 Interface p/n 3990250670: added RoHS certification GE863-PY Interface p/n 3990250669: added RoHS certification GE863-GPS Interface p/n 3990250671: added RoHS certification GE863-PY Interface p/n 3990250684: added RoHS certification GC864-QUAD Interface p/n 3990250685: added RoHS certification GE864-PY Interface p/n 3990250672: added RoHS certification GC864-PY Interface p/n 3990250680: added RoHS certification Rev.6 24/05/2007 Pag. 2 Product Table updated Pag. 10 Table 1 updated Pag.24 Modified the formula Pag.22 Inserted the Audio Section chapter Pag.39 Table 10 modified PCB release updating Erased all Dual Camera paragraph Figures and table updated Paragraph 15.3 16.2 17.3 18.3 19.3 inserted 24.1 EVK2 SYS p/n 3990150463: added RoHS certification 24.9 GE864-QUAD Interface p/n 3990250688: added RoHS certification 24.11 GE864-QUAD-C2 Interface p/n 3990250683: added RoHS certification Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 313 of 314 Telit EVK2 User Guide 1vv0300704 Rev.18 - 2014/06/30 Rev.7 22/01/2008 Rev.8 20/03/2008 Rev. 9 28/05/2008 Rev. 10 20/06/2011 Rev. 11 18/07/2011 Rev. 12 Rev. 13 2012/05/21 2012/06/25 Rev. 14 2012/12/11 Rev. 15 Rev. 16 Rev. 17 Rev. 18 2013-02.19 2013/03/15 2013/05/30 2014/06/30 Pag. 2 Product Table updated with UC864-E and GE863-SIM Pag.7 Disclaimer Date modified Pag.13 Inserted UC864 Interface dimensions Pag.36 Inserted refer to GE863-SIM Pag.38 Table 10 Inserted UC864 and GE863-SIM Interface Code Pag.38 Order Code Table updated Pag.42 Added figure 24 with GE863-SIM photo Pag.43 Added GE863-SIM version kit list Pag.54 Inserted UC864 Interface photo Pag.64 Inserted figure 40 and Table 17 of UC864 GPIO positioning Pag.77-78 Inserted UC864 Interface Schematic diagrams Removed notes regarding interface board of phased out models from the GE863 family (Please refer to the previous version of this document if you need information for the interfaces with the following P/N: 3990250669 & 3990250677) Pag.64 Updated 40 and Table 19 of UC864 GPIO positioning Pag.66-70 Updated EVK mother board schematics Pag.81 Added new European WEEE directive Pag.77-78 Replaced UC864 Interface board schematics with more readable drawings. Pag.02 Replaced the applicability list - Pag.123 replaced the RoHS certifications HE910 added to the document GE864-GPS section update to align with latest PCB development Added GE865-JF2 sections Updated fig.48 Updated HE910 interface board P/N in applicability Table. Update GE865+JF2 drawings 27.1 Updated with GE910 interface board; P/N in applicability Table. Updated Startup procedure chapter with XX910 products and timings; Updated Power ON Switch chapter with XX910 products and timings; Updated Figure 22 Switches position Added info for DE910 and CE910 20 2.2.15 DE910 Interface CS1467D 20 2.2.16 CE910 Interface CS1467D 27 DE910 family Interface 28 CE910 family Interface 29.1.12 DE910 Interface 29.1.13 CE910 Interface 30.17 DE910 Interface board schematic 30.18 CE910 Interface board schematic Added 20 about JN3+GL865 Interface board. Added GL865 V3 interface board Added GE910-GNSS; GE910-QUAD V3, UE910, LE920 interface board Added HE920, HE910 V2, UE910 V2, CL865, UL865 and LE910 interface boards Updated 45.1 Disposal of product in the European Union Added 45.2 Disposal of product outside the European Union Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 314 of 314