Document 594 Flyback Transformer For Texas Instruments LM5001 Switch Mode Regulator * Developed for the Texas Instruments LM5001 High Voltage Switch Mode regulator for isolated and non-isolated flyback topologies. * Output of the auxiliary winding is 7.5 V used to power the IC * 1500 Vrms, one minute isolation from the primary and auxiliary winding to the secondary Core material Ferrite Terminations RoHS tin-silver over tin over nickel over phos bronze. Weight 6.28 g Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 175 per 13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 32 mm pocket spacing, 12.98 mm pocket depth PCB washing Only pure water or alcohol recommended Inductance Part at 0 A2 number1 10% (H) FA2636-AL_ 160 Inductance at Ipk3 min (H) 144 Leakage DCR max (Ohms)4 Turns ratio6 inductance pri bias sec max (H)5 pri : sec pri : aux 0.225 0.340 0.078 1.60 8:2 8:3 1. When ordering, please specify packaging code: Packaging: FA2636-ALD D = 13 machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. Inductance is for the primary, measured at 250 kHz, 0.2 Vrms, 0 Adc. Ipk is peak primary current drawn at minimum input voltage. DCR for the secondary is per winding. Leakage inductance measured between pins 3 and 2 with all other pins shorted. 6. Turns ratio is with the secondary windings connected in parallel. 7. Operating temperature range -40C to +85C. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 3 Pri 0.500 max 12,70 2 4 0.004 /0,10 6 Sec 7 6 5 0.028 0,70 5 0.061 1,55 0.590 14,99 0.050 1,27 Secondary windings to be connected in parallel on the PC board. Recommended Land Pattern 0.530 max 13,46 10 8 9 Aux 0.699 max 17,75 0.512 13,00 Output 5.0 V, 1.0 A 2. 3. 4. 5. Dot above pin1 0.039 1,00 Ipk3 (A) 1.0 1 0.098 2,50 0.098 2,50 1 Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 594 Revised 09/03/08 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: FA2636-ALB FA2636-ALD