Information Seite 173 Accessories 174 Fan filter guard grilles 180 Inlet nozzles 182 Connection cables / Accessories 183 AC axial fans ACmaxx / i-maxx DC fans - specials Guard grilles DC axial fans 14:22 DC centrifugal fans 18.01.2011 Accessories AC centrifugal fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum fan operation: From temperature sensing for speedcontrolled fans to finger guards of all types, switched-mode power supply, connecting cable, filter, screens, spacers and assembly parts. In addition to the accessories and assembly parts listed in this catalogue, ebm-papst also supplies numerous special parts for fan operation. The sales experts at ebm-papst will be happy to assist you in your enquiries concerning fan assembly and application. From selection to accessories: Insist on the efficient and reliable service provided by ebm-papst. 173 Representatives Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:22 Seite 174 Guard grilles - Guard grille acc. to DIN EN ISO 13857 (previously EN 294), made of galvanised or nickelplated and passivated steel wire for device fans. - Additional guard grilles that do not conform to DIN EN ISO 13857 are available on request. - Our guard grilles are specially designed for use with ebm-papst fans. Their design ensures maximum safety with minimum effect on the operating noise level. Note that when using guard grilles from other manufacturers, compliance with safety-related distances will not always be present. Fan series Guard grilles Fan series Guard grilles Fan series Guard grilles 400 LZ29-1 5600 LZ25 DV 6200 LZ37 Intake side 500 LZ31 5200 LZ35 DV 6200 LZ39 Outlet side 600 LZ28-1 5300 LZ53 DV 6400 LZ38 Intake side 3000 LZ23-1 5900 LZ35 DV 6400 LZ39 Outlet side 8000 LZ32-4 / LZ22-2 7000 LZ36 9000 LZ30-4 / LZ 30 6300 LZ37 4000 LZ30-4 / LZ 30 6400 LZ38 5100 LZ25 2200F LZ22 LZ29-1 Fan size 40 x 40 LZ31 Fan size 50 x 50 LZ28-1 Fan size 60 x 60 50 1,8 2 +0,3 4, 2 4,5 0, 5 42 50 42 30+1 59 4,8 Fan size 92 x 92 LZ32-4 Fan size 80 x 80 LZ30-4 104,8 71,5 82,5 71,5 82,5 Fan size 119 x 119 2 + 0,3 2+0,3 40+1 _ 92 1 174 40+1 78,2 0,5 2 0, 3+ 4,7+1 4,7+1 4, 4, 3+ 4, 3 0, 2 + 0, 2 2 + 0,3 104,8 LZ23-1 4,2 +0,5 51,5 +1 _ 119 1 4,7+1 18.01.2011 14:22 Seite 175 Information Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage Fan size 135 x 135 LZ35 Fan size 127 x 127 LZ36 Fan size 150 x 172 LZ37 Fan size 172 O x 51 LZ38 Fan size 172 O x 51 LZ39 Fan size 172 O x 51 LZ53 Fan size 140 x 140 LZ30 Fan size 119 x 119 LZ22-2 AC axial fans 781 481 105,5 +0,5 115 1 153,5 1 + 0,2 70 136,5 124,5 Fan size 80 x 80 30,25 4,3+0,2 + 6,45 2,5+0,3 5+1 +1 2 0, AC centrifugal fans 4,3+0,2 5 LZ22 ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans LZ25 Fan size 200 x 51 ( Accessories 199,5 + 0,5 186,5 ) 5 8, 14 8,45 +1 175 Representatives 5 + 0,2 27,5 Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:22 Seite 176 ACmaxx guard grilles - Guard grille acc. to DIN EN ISO 13857 (previously EN 294), made of galvanised or nickelplated and passivated steel wire for device fans. - The guard grilles shown on this page are designed specially for ACmaxx series fans and are installed on the outlet side. Fan series Guard grilles Fan series Guard grilles AC 8300 LZ32-4 Intake side s.P.174 AC 6200 N LZ37 Intake side s.P.175 AC 8300 H LZ32-7 Outlet side AC 6200 N LZ37-2 Outlet side AC 3200 J LZ23-1 Intake side s.P.174 AC 6100 N LZ37 Intake side s.P.175 AC 3200 J LZ23-6 Outlet side AC 6100 N * Outlet side AC 4400 FN LZ30-4 Intake side s.P.174 *Outlet-side grilles on request AC 4400 FN LZ30-9 Outlet side AC 4300 LZ30-4 Intake side s.P.174 AC 4300 LZ30-9 Outlet side ACi 4400 LZ30 Intake side s.P.175 ACi 4400 LZ30 Outlet side s.P.175 LZ30-9 Fan size 119 X 119 LZ37-2 Fan size 172 O X 51 LZ23-6 Fan size 92 x 92 82,5 + 0,2 51,5 104,8 89 2,5 2 +0,3 4, 3+ 0, 2 4,5 + 4,7+1 51,5 +1 119 -1 LZ32-7 Fan size 80 x 80 0,5 79,8 + 0,2 61,1 + 0,25 71,5 4,5 + 0,1 6,3 + 12,9 176 63,7 9 8, 15 O +0,5 162 0,3 104,8 0,3 + 0,3 4,3 0,2 6 0,5 0,1 7,3 18.01.2011 14:22 Seite 177 Information Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage Guard grilles W1G 250 09418-2-4039 W2E 250 09418-2-4039 W2E 200 78128-2-4039 78128-2-4039 Size 200 09418-2-4039 ACmaxx / i-maxx 78128-2-4039 Size 250 AC axial fans Guard grilles W4S 200 AC centrifugal fans Fan series 78128-2-4039 Accessories Guard grilles W1G 200 177 Representatives Fan series DC fans - specials DC centrifugal fans DC axial fans - Steel wire, plastic-coated, silver-metallic gloss. Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:22 Seite 178 Guard grilles - Guard grille acc. to DIN EN ISO 13857 (previously EN 294), made of fibreglass-reinforced plastic. - Plastic grilles must not be used for the following models: 8200 JH3 / JH4 3200 JH3 / JH4 4100 NH5 - NH8 Guard grilles Mounting B C D E Guard grilles Mounting B C D E LZ32-2 A1 80-0,5 71,50,2 7,0 34 LZ30-5 A2 119-0,5 1050,2 6,5 50 LZ32-3 A3 80-0,5 71,50,2 7,0 34 LZ30-6 A4 119-0,5 1050,2 6,5 50 LZ23-2 A1 92,5-0,5 82,50,2 6,5 46 LZ33-1 A2 127-0,5 113,50,2 6,5 50 A3 92,5-0,5 82,50,2 A4 127-0,5 113,50,2 6,5 50 LZ23-3 6,5 46 LZ33-2 Screw connection LZ32-2 / LZ32-3 Size 80 x 80 LZ23-2 / LZ23-3 Size 92 x 92 LZ30-5 / LZ30-6 Size 119 x 119 LZ33-1 / LZ33-2 Size 127 x 127 Barbed inserts Suitable for bore diameters 4.3 - 4.7 only. LZ32P 178 Fan size 80 x 80 LZ30P Fan size 119 x 119 18.01.2011 14:22 Seite 179 Information Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage Guard grilles for compact centrifugal modules 9,0 RG 220 LZ47 166 8,7 RG 225 LZ48 158 8,7 a b ACmaxx / i-maxx 133 AC axial fans b LZ46 AC centrifugal fans Guard grilles Accessories a RG 190 179 Representatives Fan series DC fans - specials DC centrifugal fans DC axial fans - PA plastic 6, fibreglass-reinforced Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:22 Seite 180 Fan filter guard grilles - - - - Fan series DC Fan series AC 4400 F AC 4300 4400 FN 9900 4300 4000 N 4300 N 4000 Z Filter guard grilles consist of a mounting plate, filter and screen. Screen LZ40 N made of black, fibreglass-reinforced plastic with inserted wire netting LZ60. Filter LZ60 made of Nirosta stainless steel wire netting. Mounting plate LZ40-1 for installation. 4400 4200 4100 N LZ40N 180 Screen LZ40-1 Bracket LZ60 Filter Information Seite 181 Fan filter guard grilles - Filter guard grille suitable for attachment to axial fan series of size 60 mm, 80 mm, 92 mm, 119 mm, o 172 mm. All filter units fit directly onto the existing installation holes of the fans. - Filter guard grille consisting of 3 parts: outer grille barrier, inner fastening plate and replaceable filter mat. - Grille barrier made of moulded polycarbonate (PC), with matted surface. - Fast and easy exchange of filter mat via a quick release on the grille barrier. - Fastening plate made of wire netting, with black powder coating. - Filter mat can be replaced while the fan is running, protection provided by welded wire netting. - Filter mat made of white, synthetically bonded fibres. Fan size A B C D FF60 60 x 60 mm 65 65 13,5 50,0 RF 60 Replacement filter* FF80 80 x 80 mm 85 85 14,0 71,5 RF 80 FF92 92 x 92 mm 125 105 17,5 82,5 RF 92 FF119 119 x 119 mm 162 136 18,5 104,5 RF 119 FF172 o 172 mm 226 190 19,5 162,0 RF 172 DC fans - specials Protection filter FF92 / FF 119 D A C D A C D AC centrifugal fans D D C B A 92 x 92 mm 119 x 119 mm AC axial fans Fan size: 60 x 60 mm 80 x 80 mm B Fan size: ACmaxx / i-maxx * Replacement filters only in packs of 5. FF60 / FF80 FF 172 Accessories Filter capacity A fan filter guard filters out up to 75% of dust particles up to a size of 5-10 microns and withstands temperatures of up to 100C. Flame retardant in accordance with DIN 53438, grade F1. For installed, clean filters, an air flow reduction of 20 - 30% can be assumed. 172 mm B Fan size: DC axial fans 14:22 DC centrifugal fans 18.01.2011 181 Representatives Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:22 Seite 182 Inlet nozzles for centrifugal fans - Material: Sheet steel, galvanised Fan Vers. k m o q r1 s t u RET 97 (S) 1 116,0 80,0 10,0 0,80 10,0 108,0 3x4,5 - No.: LZ 1000-097 RER 120 (P) 1 146,0 94,4 18,0 0,80 16,0 134,0 4x4,5 126,0 LZ 1000-120 RER 133 (P) 1 129,0 87,0 13,0 1,00 8,0 118,0 4x4,5 103,0 LZ 1000-133 RER 175 / 190 (P) 1 170,0 125,5 14,0 1,25 10,0 158,0 4x4,5 146,0 LZ 1000-175 RER 220 (P) 2 252,0 155,0 21,0 0,80 22,0 - - 199,0 LZ 1000-220 RER 225 (P) 1 223,0 146,0 28,0 1,50 25,0 210,0 4x4,5 196,0 LZ 1000-225 (P) = plastic, (S) = sheet steel Vers. 1 Vers. 2 45 118 4, 5 24 Os Ou Ok Om 182 242 r1 q t 6x 60 5,5 4 x 90 3 0 14:22 Seite 183 Information 18.01.2011 Connector cables L1 (mm) LZ120 610 LZ120-4 2 000 LZ120-5 380 LZ120-6 610 Leads DC axial fans Plug Leads end Lead colour Receptacle for tabs 0,5 mm2 0,5 mm2 Application G C black/black 2,8 x 0,5 AC G A black/black 2,8 x 0,5 AC 0,5 mm2 0,5 mm2 W B red/black 2,8 x 0,5 DC W B red/black 2,8 x 0,5 DC G A red/black 2,8 x 0,5 DC G B black/black 2,8 x 0,5 AC LZ120-11 2 000 LZ120-16 800 0,5 mm2 0,5 mm2 LZ120-18 4 000 0,5 mm2 G A black/black 2,8 x 0,5 AC LZ126 1 000 G C black/black 2,8 x 0,5 AC LZ127 1 600 0,5 mm2 0,5 mm2 G B black/black 2,8 x 0,5 AC 0,82 mm2 0,73 mm2 G C black/black 2,8 x 0,5 AC G B black/black 2,8 x 0,8 AC LZ130-1 610 LZ140 610 10 AC centrifugal fans L1 Angled plug (W) 8 6 8,5 0,1 4 20 +0,5 8 L1 Leads end A Tin-plated Leads end B Core end sleeve Leads end C O1,5 Core crimp sleeve 5,5 -0,25 O1,5 7,5 6 10+5 -2 6 183 Accessories 31 3,5 -0,25 Connector cable 4 Representatives 22,5 AC axial fans 8,5 0,1 7,5 11 16 -0,5 20,2 Straight plug (G) 16,5 15 12 Connector cable DC fans - specials Plug model Connector cable with injection-moulded plug in various lengths. Strand ends with core-crimping sleeve, core-end sleeve or tin-plated. Straight or angled plug. For all types of fan with flat plug 2.8 / 3.0 x 0.5. ACmaxx / i-maxx - - - - DC centrifugal fans Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage Kompaktlufter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:22 Seite 184 Accessories In addition to the accessories and assembly parts listed in this catalogue, ebm-papst also supplies numerous special parts for fans. The sales experts at ebm-papst will be happy to assist you in your enquiries concerning fan assembly and application. Fan series Accessories Fan series Accessories 8300 LZ212 / LZ260 5100 LZ210 8400 N LZ261 5600 LZ210 3300 LZ212 / LZ260 5200 LZ210 3400 N LZ261 5900 LZ210 9000 LZ210 7000 LZ210 4000 LZ210 VARIOFAN LZ370 4300 LZ212 / LZ260 8300 LZ212 LZ212 LZ260/LZ261 LZ210 Screw clip of stainless steel. For mounting fans with threaded pin 3.5 DIN EN ISO 1478 (7970). Spacer of fibreglass reinforced plastic. For screw mounting over both fan mounting flanges. Screw clip of hardened steel. For mounting fans with threaded pin 6-32 UNC and/or 3.5 DIN 7970. LZ370 LZ550 (2x) 0,5x45 Pmax = 0,25 W 5% @25C 2% 50 = 4190 0,5 12 Temperature sensor for speed-controlled fan operation. Temperature range 30...50 C. 184 6,9 0,1 110,3 (2x) O 4 = 100 K B-value O 11 R 25 O 6,6 Required performance data: Rubber anti-vibration mounts for fans with a hole o of 4.3 0.2 mm and flange thickness of 3 - 5.5 mm. For a carrier plate with a hole o of 6.5 0.15 mm and plate thickness of 1 - 2 mm. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ebm-papst: 78128-2-4039 LZ29-1 LZ30 LZ120 LZ126 LZ25 LZ32-2 LZ32P LZ35 LZ37 LZ38 LZ28-1 LZ30-4 LZ30-9 LZ32-4 LZ36 LZ37-2 LZ53 LZ120-6 LZ31 LZ212 LZ22-2 LZ550