SMQ-Series(Snap-in) ALUMINUM ELECTROLYTIC CAPACITORS LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85C @Ideal for inverter smoothing capacitors such as Electric Vehicle, Hybrid Car, etc. @Endurance with ripple current : 85C 5000 hours @Rated voltage range : 63 to 450Vdc @Lower profile offers drastic space saving comparing to conventional cylindrical type @Superior heat radiation realizes higher ripple current ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics Endurance Shelf Life -40 to +85C (63K100Vdc), -25 to +85C (350K450Vdc) 63 to 450Vdc P20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C, 120Hz) (at 20C after 5 minutes) 0.25 max. (at 20C, 120Hz) 63 to 100Vdc : C(-40C)/C(+20C)]0.6 350 to 450Vdc : C(-25C)/C(+20C)]0.7 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for 5000 hours at 85C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 85C without voltage applied. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value Capacitance change ?DIMENSIONS (Terminal Type=LGSN) [mm] @35B64 size @26B70 size Vent 2-M5 L+2max. 23+3max. 28.6P0.5 61+3max. 2-M5 31P0.5 70+3max. 67+3max. Vent 64+3max. Sleeve Sleeve L+2max. L+11max. 2.4P0.5 32+3max. 26+3max. L+12max. 2.9P0.5 35+3max. <Screw specifications> Plus hexagon-headed screw: M5B0.8 Maximum screw tightening torque: 3.23Nm ?PART NUMBERING SYSTEM FTP 80 LGSN 12000 M Capacitance tolerance (P20%) Nominal capacitance in MF Screw terminal type Rated voltage in volts Series name (1/2) CAT. No. E1001D SMQ-Series(Snap-in) ALUMINUM ELECTROLYTIC CAPACITORS LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85C ?STANDARD RATINGS Vdc SV Items 63 80 79 100 100 125 Capacitance (mF) 20c, 120Hz Rated ripple current (Arms) 85c, 10kHz Capacitance (mF) 20c, 120Hz Rated ripple current (Arms) 85c, 10kHz Capacitance (mF) 20c, 120Hz Rated ripple current (Arms) 85c, 10kHz 26b70b50 6,000 14.0 4,300 14.0 2,900 14.0 26b70b75 12,000 19.0 8,600 19.0 5,700 19.0 26b70b95 17,000 22.0 12,000 22.0 8,100 22.0 35b64b50 7,400 16.1 5,300 16.1 3,600 16.1 35b64b75 15,000 21.7 10,000 21.7 7,100 21.7 35b64b95 21,000 25.3 15,000 25.3 10,000 25.3 Case size S.DiaBL.Dia.BL(mm) Vdc SV Items Case size S.DiaBL.Dia.BL(mm) Capacitance (mF) 20c, 120Hz 350 400 450 400 450 500 Rated ripple current (Arms) 85c, 10kHz Capacitance (mF) 20c, 120Hz Rated ripple current (Arms) 85c, 10kHz Capacitance (mF) 20c, 120Hz Rated ripple current (Arms) 85c, 10kHz 26b70b50 400 10.6 330 10.6 270 10.1 26b70b75 800 15.7 660 15.7 540 15.0 26b70b95 1,100 18.7 930 18.7 760 18.0 35b64b50 490 11.9 400 11.9 330 11.4 35b64b75 970 17.6 800 17.6 660 16.7 35b64b95 1,400 21.0 1,100 21.0 930 20.1 ?Improvement of space factor and heat radiation Dead spaces are found for the conventional cylindrial shape. But lower profile offers small dead spaces, and makes the equipments smaller in size. Moreover, the internal element of the lower profile capacitor is widely touched to the can. This largely improves the heat radiation compared to the cylindrical shape. (2/2) Cylindrical shape FTP series CAT. No. E1001D