LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85C
CAT. No. E1001D
@Ideal for inverter smoothing capacitors such as Electric Vehicle, Hybrid Car, etc.
@Endurance with ripple current : 85C 5000 hours
@Rated voltage range : 63 to 450Vdc
@Lower profile offers drastic space saving comparing to conventional cylindrical type
@Superior heat radiation realizes higher ripple current
?SPECIFICATIONS
(at 20C, 120Hz)
(at 20C after 5 minutes)
(at 20C, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
Endurance
Shelf Life
Items
-
40 to +85C (63K100V
dc
),
-
25 to +85C (350K450V
dc
)
63 to 450V
dc
P20% (M)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
0.25 max.
Capacitance change 63 to 100V
dc
: C(-40C)/C(+20C)]0.6
350 to 450V
dc
: C(-25C)/C(+20C)]0.7
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 5000 hours at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)[200% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 85C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)[200% of the initial specified value
Leakage current [The initial specified value
Characteristics
?PART NUMBERING SYSTEM
FTP 80 LGSN 12000 M
Capacitance tolerance (P20%)
Nominal capacitance in MF
Screw terminal type
Rated voltage in volts
Series name
?DIMENSIONS (Terminal Type=LGSN) [mm]
@26B70 size @35B64 size
<Screw specifications>
Plus hexagon-headed screw: M5B0.8
Maximum screw tightening torque: 3.23Nm
L+2max.
L+12max. 35+3max.
32+3max.
Vent
64+3max.
61+3max.
28.6
P
0.5
2-M5
2.9P0.5
Sleeve
L+11max.
L+2max.
26+3max.
23+3max.
70+3max.
67+3max.
31
P
0.5
Vent
2-M5
2.4P0.5
Sleeve
(1/2)
ALUMINUM ELECTROLYTIC CAPACITORS
SMQ-Series(Snap-in)
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85C
CAT. No. E1001D
?STANDARD RATINGS
?Improvement of space factor and heat radiation
Dead spaces are found for the conventional cylindrial shape. But
lower profile offers small dead spaces, and makes the equipments
smaller in size. Moreover, the internal element of the lower profile
capacitor is widely touched to the can. This largely improves the
heat radiation compared to the cylindrical shape. Cylindrical shape FTP series
63
79
80
100
100
125
S.DiaBL.Dia.BL(mm)
Items
Case size
SV
Vdc
S.DiaBL.Dia.BL(mm)
Items
Case size
SV
Vdc
26b70b50
26b70b75
26b70b95
35b64b50
35b64b75
35b64b95
Capacitance
(mF)
20c, 120Hz
6,000
12,000
17,000
7,400
15,000
21,000
4,300
8,600
12,000
5,300
10,000
15,000
2,900
5,700
8,100
3,600
7,100
10,000
Rated ripple current
(Arms)
85c, 10kHz
Capacitance
(mF)
20c, 120Hz
Rated ripple current
(Arms)
85c, 10kHz
Capacitance
(mF)
20c, 120Hz
Rated ripple current
(Arms)
85c, 10kHz
Capacitance
(mF)
20c, 120Hz
Rated ripple current
(Arms)
85c, 10kHz
Capacitance
(mF)
20c, 120Hz
Rated ripple current
(Arms)
85c, 10kHz
Capacitance
(mF)
20c, 120Hz
Rated ripple current
(Arms)
85c, 10kHz
14.0
19.0
22.0
16.1
21.7
25.3
14.0
19.0
22.0
16.1
21.7
25.3
14.0
19.0
22.0
16.1
21.7
25.3
350
400
400
450
450
500
26b70b50
26b70b75
26b70b95
35b64b50
35b64b75
35b64b95
400
800
1,100
490
970
1,400
330
660
930
400
800
1,100
270
540
760
330
660
930
10.6
15.7
18.7
11.9
17.6
21.0
10.6
15.7
18.7
11.9
17.6
21.0
10.1
15.0
18.0
11.4
16.7
20.1
(2/2)
ALUMINUM ELECTROLYTIC CAPACITORS
SMQ-Series(Snap-in)
