Ordering number:EN4177 N-Channel Silicon MOSFET 2SK1813 High-Speed Switching Applications Features Package Dimensions * Low ON resistance. * Ultrahigh-speed switching. * Converters. unit:mm 2089 [2SK1813] 4.5 1.3 20.9 1.6 8.8 11.5 0.9 10.2 11.0 9.4 1.2 0.8 0.4 1 2 3 2.7 1 : Gate 2 : Drain 3 : Source SANYO : TO-220MF 2.55 2.55 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Conditions Ratings Unit VDSS VGSS 100 V 20 V ID 30 A IDP Allowable Power Dissipation PD Junction Temperature Tj Storage Temperature Tstg PW10s, duty cycle1% 120 A 1.65 W Tc=25C 70 W 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Votlage Drain Current Gate-to-Source Leakage Current VDSS IDSS min ID=1mA, VGS=0 typ VGS=20V, VDS=0 Forward Transfer Admittance Static Drain-to-Source On-State Resistance RDS(on) ID=20A, VGS=10V max 100 VDS=10V, ID=1mA VDS=10V, ID=20A 1.5 13 100 A 100 nA 2.5 V 0.055 22 0.040 (Note) Be careful in handling the 2SK1813 because it has no protection diode between gate and source. Unit V VDS=100V, VGS=0 IGSS VGS(off) | yfs | Cutoff Voltage Ratings Conditions S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62199TH (KT)/10694TH (KOTO) 8-7448 No.4177-1/4 2SK1813 Continued from preceding page. Parameter Symbol Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) Conditions VDS=20V, f=1MHz VDS=20V, f=1MHz Turn-OFF Delay Time td(off) VDS=20V, f=1MHz ID=20A, VGS=10V, VDD=50V, RGS=50 ID=20A, VGS=10V, VDD=50V, RGS=50 ID=20A, VGS=10V, VDD=50V, RGS=50 Fall Time tf VSD ID=20A, VGS=10V, VDD=50V, RGS=50 IF=30A, VGS=0 Rise Time Diode Forward Voltage tr Ratings Unit 2400 pF 700 pF 200 pF 30 ns 90 ns 320 ns 130 ns 1.8 V Switching Time Test Circuit No.4177-2/4 2SK1813 No.4177-3/4 2SK1813 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 1999. Specifications and information herein are subject to change without notice. PS No.4177-4/4