2SK1813 - Sanyo Semiconductor

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

N-Channel Silicon MOSFET

High-Speed Switching Applications

Ordering number:EN4177

2SK1813

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

62199TH (KT)/10694TH (KOTO) 8-7448 No.4177–1/4

10.2

20.9 11.5

9.4

0.8

1.6

1.2

0.9

11.0 8.8

4.5 1.3

0.4

2.55

2.7

123

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Package Dimensions

unit:mm

2089

[2SK1813]

Features

· Low ON resistance.

· Ultrahigh-speed switching.

· Converters.

˚C

Electrical Characteristics at Ta = 25˚C

1 : Gate

2 : Drain

3 : Source

SANYO : TO-220MF

(Note) Be careful in handling the 2SK1813 because it has no protection diode between gate and source. Continued on next page.

Tc=25°C

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVecruoS-ot-niarDV

SSD 001V

egatloVecruoS-ot-etaGV

SSG 02±V

)CD(tnerruCniarDI

D03A

)eslup(tnerruCniarDI

PD 021A

noitapissiDrewoPelbawollAP

D56.1W

07W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

˚C

PW≤10µs, duty cycle≤1%

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnwodkaerBecruoS-ot-niarDV

SSD IDV,Am1= SG 0=001V

tnerruCniarDegaltoVetaG-oreZI

SSD VSD V,V001= SG 0=001Aµ

tnerruCegakaeLecruoS-ot-etaGI

SSG VSG V,V02±= SD 0=001±An

egatloVffotuCV

)ffo(SG VSD I,V01= DAm1=5.15.2V

ecnattimdArefsnarTdrawroF|sfy|V

SD I,V01= DA02=3122S

ecnatsiseRetatS-nOecruoS-ot-niarDcitatSR

)no(SD IDV,A02= SG V01=040.0550.0 Ω

2SK1813

No.4177–2/4

Continued from preceding page.

Switching Time Test Circuit

retemaraPlobmySsnoitidnoCsgnitaRtinU

ecnaticapaCtupnIssiCV

SD zHM1=f,V02=0042Fp

ecnaticapaCtuptuOssoCV

SD zHM1=f,V02=007Fp

ecnaticapaCrefsnarTesreveRssrCV

SD zHM1=f,V02=002Fp

emiTyaleDNO-nruTt

)no(d IDV,A02= SG V,V01= DD R,V05= SG 05= Ω03sn

emiTesiRt

rIDV,A02= SG V,V01= DD R,V05= SG 05= Ω09sn

emiTyaleDFFO-nruTt

)ffo(d IDV,A02= SG V,V01= DD R,V05= SG 05= Ω023sn

emiTllaFt

fIDV,A02= SG V,V01= DD R,V05= SG 05= Ω031sn

egatloVdrawroFedoiDV

DS IFV,A03= SG 0=8.1V

2SK1813

No.4177–3/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of June, 1999. Specifications and information herein are subject to

change without notice.

2SK1813

PS No.4177–4/4