Film Capacitors
Metallized Polypropylene Film Capacitors (MKP)
Series/Type: B32651 ... B32658
Date: November 2019
© TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto
and the information contained therein without TDK Electronics' prior express consent is prohibited.
Typical applications
Electronic ballasts
Switch-mode power supplies
IGBT
Snubbering
Climatic
Max. operating temperature: 110 °C
Climatic category (IEC 60068-1:2013): 55/100/56
Construction
Dielectric: polypropylene (PP)(MKP)
Wound capacitor technology with internal
series connection
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Features
High pulse strength
High contact reliability
RoHS-compatible
Very low inductance
Halogen-free capacitors available on request
AEC-Q200D compliant
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Manufacturer's logo,
lot number ( ≤27.5 mm), series number (e.g. 651),
rated capacitance (coded), cap. tolerance (code letter),
rated DC voltage (AC voltage for 1600 V DC/700 V AC
and 2000 V DC/1000 V AC),
date of manufacture (coded)
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping, refer to chapter "Taping and packing“.
Metallized polypropylene film capacitors (MKP) B32651 ... B32658
High pulse (wound)
Page2of61Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawings
Number of wires Lead spacing
±0.4
Lead diameter d1
±0.05
Type Drawing
2-pin 10 0.6 B32651 A1
2-pin 15 0.8 B32652 A1
2-pin 22.5 0.8 B32653 A1
2-pin 27.5 0.8 B32654 A1
2-pin 37.5 1.0 B32656A/J A1
2-pin 37.5 1.0 B32656T A2
4-pin 37.5 1.2 B32656G B1
4-pin 52.5 1.2 B32658G B1
(Dimensions in mm)
Dimensional drawings 2-pin versions
Drawing A1
B32651 B32652 B32653 B32654 B32656A/J
Lead spacing ±0.4: 10 15 22.5 27.5 37.5
Lead diameter d1: 0.6 0.8 0.8 0.8 1.0
(Dimensions in mm)
B32651 ... B32658
High pulse (wound)
Page3of61Please read Cautions and warnings and
Important notes at the end of this document.
Drawing A2 (low profile)
Lead spacing ±0.4: 37.5
Lead diameter d1: 1.0
(Dimensions in mm)
Dimensional drawings 4-pin versions
Drawing B1
B32656G B32658G
Lead spacing ±0.4: 37.5 52.5
Lead diameter d1: 1.2 1.2
(Dimensions in mm)
B32651 ... B32658
High pulse (wound)
Page4of61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 10 mm
Type B32651
Page 12
VR(V DC) 1250
VRMS (V AC) 450
CR(nF)
2.2
3.3
4.7
6.8
B32651 ... B32658
High pulse (wound)
Page5of61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 15 mm
Type B32652
Page 13
VR(V DC) 250 400 630 1000 1250 1600 1600 2000
VRMS (V AC) 160 200 250 250 500 500 700 700
CR(nF)
1.0
1.5
2.2
3.3
4.7
5.6
6.8
10
12
15
22
33
47
56
68
100
120
150
220
330
390
470
560
680
820
1000
B32651 ... B32658
High pulse (wound)
Page6of61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 22.5 mm
Type B32653
Page 16
VR(V DC) 250 400 630 1000 1250 1600 2000 2000
VRMS (V AC) 160 200 250 250 500 500 700 1000
CR(nF)
2.2
3.3
4.7
6.8
10
12
15
22
33
47
56
68
82
100
120
150
220
330
470
560
680
1000
1200
1500
2200
3300
B32651 ... B32658
High pulse (wound)
Page7of61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 27.5 mm
Type B32654
Page 19
VR(V DC) 250 400 630 1000 1250 1600 2000
VRMS (V AC) 160 200 250 250 500 500 700
CR(nF)
22
33
47
68
82
100
150
220
330
470
560
680
820
1000
1200
1500
2200
2700
3300
4700
5600
6800
8200
B32651 ... B32658
High pulse (wound)
Page8of61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 37.5 mm
Type B32656
Page 21
VR(V DC) 250 400 630 750
VRMS (V AC) 160 200 250 350
CR(nF)
470
560
680
820
1000
1200
1500
1800
2000
2200
2500
2700
3000
3300
3500
4000
4700
5600
6800
7000
7500
8000
10000
12000
14000
15000
17000
20000
24000
B32651 ... B32658
High pulse (wound)
Page9of61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 37.5 mm
Type B32656
Page 24
VR(V DC) 850 1000 1250 1600 2000
VRMS (V AC) 450 500 500 600 700
CR(nF)
68
100
120
150
220
270
330
390
470
560
680
820
900
1000
1200
1500
1800
2200
2500
2700
3000
3300
3800
B32651 ... B32658
High pulse (wound)
Page 10 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
Lead spacing 52.5 mm
Type B32658
Page 28
VR(V DC) 250 400 630 750 850 1000 1250 1600 2000
VRMS (V AC) 160 200 250 350 450 500 500 600 700
CR(nF)
680
820
1000
1200
1500
2000
2200
2700
3300
4500
4700
5600
6000
6800
9000
12000
15000
20000
26000
30000
40000
B32651 ... B32658
High pulse (wound)
Page 11 of 61Please read Cautions and warnings and
Important notes at the end of this document.
1) For pulse loads (pulse width ≤1000 μs), a peak voltage of 1400 Vpcan be permitted.
Ordering codes and packing units (lead spacing 10 mm)
VR
VDC
1)
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ
Reel
pcs./MOQ
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
1250 450 2.2 4.0 ×9.0 ×13.0 B32651A7222+*** 4000 6800 4000
3.3 5.0 ×11.0 ×13.0 B32651A7332+*** 3320 5200 4000
4.7 5.0 ×11.0 ×13.0 B32651A7472+*** 3320 5200 4000
6.8 6.0 ×12.0 ×13.0 B32651A7682+*** 2720 4400 4000
B32651
High pulse (wound)
Page 12 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 15 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ
Reel
pcs./MOQ
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
250 160 150 5.0 ×10.5 ×18.0 B32652A3154+*** 4680 5200 4000
220 6.0 ×11.0 ×18.0 B32652A3224+*** 3840 4400 4000
330 7.0 ×12.5 ×18.0 B32652A3334+*** 3320 3600 4000
470 8.5 ×14.5 ×18.0 B32652A3474+*** 2720 2800 2000
680 9.0 ×17.5 ×18.0 B32652A3684+*** 2560 2800 2000
820 11.0 ×18.5 ×18.0 B32652A3824+*** 2200 1200
1000 11.0 ×18.5 ×18.0 B32652A3105+*** 2200 1200
400 200 68 5.0 ×10.5 ×18.0 B32652A4683+*** 4680 5200 4000
100 5.0 ×10.5 ×18.0 B32652A4104+*** 4680 5200 4000
150 6.0 ×11.0 ×18.0 B32652A4154+*** 3840 4400 4000
220 7.0 ×12.5 ×18.0 B32652A4224+*** 3320 3600 4000
330 8.5 ×14.5 ×18.0 B32652A4334+*** 2720 2800 2000
470 9.0 ×17.5 ×18.0 B32652A4474+*** 2560 2800 2000
560 11.0 ×18.5 ×18.0 B32652A4564+*** 2200 1200
680 11.0 ×18.5 ×18.0 B32652A4684+*** 2200 1200
630 250 33 5.0 ×10.5 ×18.0 B32652A6333+*** 4680 5200 4000
47 5.0 ×10.5 ×18.0 B32652A6473+*** 4680 2800 4000
68 6.0 ×11.0 ×18.0 B32652A6683+*** 3840 4400 4000
100 7.0 ×12.5 ×18.0 B32652A6104+*** 3320 3600 4000
150 8.5 ×14.5 ×18.0 B32652A6154+*** 2720 2800 2000
220 9.0 ×17.5 ×18.0 B32652A6224+*** 2560 2800 2000
330 11.0 ×18.5 ×18.0 B32652A6334+*** 2200 1200
390 11.0 ×18.5 ×18.0 B32652A6394+*** 2200 1200
B32652
High pulse (wound)
Page 13 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 15 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ
Reel
pcs./MOQ
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
1000 250 10 5.0 ×10.5 ×18.0 B32652A0103+*** 4680 5200 4000
15 5.0 ×10.5 ×18.0 B32652A0153+*** 4680 5200 4000
22 5.0 ×10.5 ×18.0 B32652A0223+*** 4680 5200 4000
33 6.0 ×11.0 ×18.0 B32652A0333+*** 3840 4400 4000
47 7.0 ×12.5 ×18.0 B32652A0473+*** 3320 3600 4000
68 8.5 ×14.5 ×18.0 B32652A0683+*** 2720 2800 2000
100 9.0 ×17.5 ×18.0 B32652A0104+*** 2560 2800 2000
120 11.0 ×18.5 ×18.0 B32652A0124+*** 2200 1200
150 11.0 ×18.5 ×18.0 B32652A0154+*** 2200 1200
1250 500 6.8 5.0 ×10.5 ×18.0 B32652A7682+*** 4680 5200 4000
10 6.0 ×11.0 ×18.0 B32652A7103+*** 3840 4400 4000
15 7.0 ×12.5 ×18.0 B32652A7153+*** 3320 3600 4000
22 8.5 ×14.5 ×18.0 B32652A7223+*** 2720 2800 2000
33 9.0 ×17.5 ×18.0 B32652A7333+*** 2560 2800 2000
47 11.0 ×18.5 ×18.0 B32652A7473+*** 2200 1200
56 11.0 ×18.5 ×18.0 B32652A7563+*** 2200 1200
1600 500 3.3 5.0 ×10.5 ×18.0 B32652A1332+*** 4680 5200 4000
4.7 6.0 ×11.0 ×18.0 B32652A1472+*** 3840 4400 4000
6.8 7.0 ×12.5 ×18.0 B32652A1682+*** 3320 3600 4000
10 8.5 ×14.5 ×18.0 B32652A1103+*** 2720 2800 2000
15 9.0 ×17.5 ×18.0 B32652A1153+*** 2560 2800 2000
22 11.0 ×18.5 ×18.0 B32652A1223+*** 2200 1200
B32652
High pulse (wound)
Page 14 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 15 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ
Reel
pcs./MOQ
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
1600 700 2.2 5.0 ×10.5 ×18.0 B32652J1222+*** 4680 5200 4000
3.3 6.0 ×11.0 ×18.0 B32652J1332+*** 3840 4400 4000
4.7 7.0 ×12.5 ×18.0 B32652J1472+*** 3320 3600 4000
6.8 8.5 ×14.5 ×18.0 B32652J1682+*** 2720 2800 2000
10 9.0 ×17.5 ×18.0 B32652J1103+*** 2560 2800 2000
12 9.0 ×17.5 ×18.0 B32652J1123+*** 2560 2800 2000
15 11.0 ×18.5 ×18.0 B32652J1153+*** 2200 1200
2000 700 1.0 5.0 ×10.5 ×18.0 B32652A2102+*** 4680 5200 4000
1.5 6.0 ×11.0 ×18.0 B32652A2152+*** 3840 4400 4000
2.2 7.0 ×12.5 ×18.0 B32652A2222+*** 3320 3600 4000
3.3 8.5 ×14.5 ×18.0 B32652A2332+*** 2720 2800 2000
4.7 9.0 ×17.5 ×18.0 B32652A2472+*** 2560 2800 2000
5.6 9.0 ×17.5 ×18.0 B32652A2562+*** 2200 1000
6.8 11.0 ×18.5 ×18.0 B32652A2682+*** 2200 1200
B32652
High pulse (wound)
Page 15 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack pcs./
MOQ
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
250 160 220 6.0 ×15.0 ×26.5 B32653A3224+*** 2720 2800 2880
330 6.0 ×15.0 ×26.5 B32653A3334+*** 2720 2800 2880
470 7.0 ×16.0 ×26.5 B32653A3474+*** 2320 2400 2520
680 8.5 ×16.5 ×26.5 B32653A3684+*** 1920 2000 2040
1000 10.5 ×16.5 ×26.5 B32653A3105+*** 1560 1600 2160
1200 10.5 ×18.5 ×26.5 B32653A3125+*** 1560 1600 2160
1500 11.0 ×20.5 ×26.5 B32653A3155+*** 1480 1400 2040
2200 14.5 ×29.5 ×26.5 B32653A3225+000 1040
3300 14.5 ×29.5 ×26.5 B32653A3335+000 1040
400 200 150 6.0 ×15.0 ×26.5 B32653A4154+*** 2720 2800 2880
220 6.0 ×15.0 ×26.5 B32653A4224+*** 2720 2800 2880
330 7.0 ×16.0 ×26.5 B32653A4334+*** 2320 2400 2520
470 8.5 ×16.5 ×26.5 B32653A4474+*** 1920 2000 2040
680 10.5 ×16.5 ×26.5 B32653A4684+*** 1560 1600 2160
1000 11.0 ×20.5 ×26.5 B32653A4105+*** 1480 1400 2040
1200 12.0 ×22.0 ×26.5 B32653A4125+000 1800
1500 14.5 ×29.5 ×26.5 B32653A4155+000 1040
2200 14.5 ×29.5 ×26.5 B32653A4225+000 1040
630 250 100 6.0 ×15.0 ×26.5 B32653A6104+*** 2720 2800 2880
150 6.0 ×15.0 ×26.5 B32653A6154+*** 2720 2800 2880
220 8.5 ×16.5 ×26.5 B32653A6224+*** 1920 2000 2040
330 10.5 ×16.5 ×26.5 B32653A6334+*** 1560 1600 2160
470 11.0 ×20.5 ×26.5 B32653A6474+*** 1480 1400 2040
560 11.0 ×20.5 ×26.5 B32653A6564+*** 1480 1400 2040
680 14.5 ×29.5 ×26.5 B32653A6684+000 1040
1000 14.5 ×29.5 ×26.5 B32653A6105+000 1040
1200 14.5 ×29.5 ×26.5 B32653A6125+000 1040
B32653
High pulse (wound)
Page 16 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack pcs./
MOQ
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
1000 250 33 6.0 ×15.0 ×26.5 B32653A0333+*** 2720 2800 2880
47 6.0 ×15.0 ×26.5 B32653A0473+*** 2720 2800 2880
68 6.0 ×15.0 ×26.5 B32653A0683+*** 2720 2800 2880
100 8.5 ×16.5 ×26.5 B32653A0104+*** 1920 2000 2040
150 10.5 ×16.5 ×26.5 B32653A0154+*** 1560 1600 2160
220 11.0 ×20.5 ×26.5 B32653A0224+*** 1480 1400 2040
330 14.5 ×29.5 ×26.5 B32653A0334+000 1040
470 14.5 ×29.5 ×26.5 B32653A0474+000 1040
560 14.5 ×29.5 ×26.5 B32653A0564+000 1040
1250 500 22 6.0 ×15.0 ×26.5 B32653A7223+*** 2720 2800 2880
33 6.0 ×15.0 ×26.5 B32653A7333+*** 2720 2800 2880
47 8.5 ×16.5 ×26.5 B32653A7473+*** 1920 2000 2040
68 10.5 ×16.5 ×26.5 B32653A7683+*** 1560 1600 2160
100 11.0 ×20.5 ×26.5 B32653A7104+*** 1480 1400 2040
120 12.0 ×22.0 ×26.5 B32653A7124+000 1800
150 14.5 ×29.5 ×26.5 B32653A7154+000 1040
220 14.5 ×29.5 ×26.5 B32653A7224+000 1040
1600 500 6.8 6.0 ×15.0 ×26.5 B32653A1682+*** 2720 2800 2880
10 6.0 ×15.0 ×26.5 B32653A1103+*** 2720 2800 2880
15 7.0 ×16.0 ×26.5 B32653A1153+*** 2320 2400 2520
22 8.5 ×16.5 ×26.5 B32653A1223+*** 1920 2000 2040
33 10.5 ×16.5 ×26.5 B32653A1333+*** 1560 1600 2160
47 11.0 ×20.5 ×26.5 B32653A1473+*** 1480 1400 2040
56 12.0 ×22.0 ×26.5 B32653A1563+000 1800
68 14.5 ×29.5 ×26.5 B32653A1683+000 1040
82 14.5 ×29.5 ×26.5 B32653A1823+000 1040
100 14.5 ×29.5 ×26.5 B32653A1104+000 1040
B32653
High pulse (wound)
Page 17 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack pcs./
MOQ
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
2000 700 3.3 6.0 ×15.0 ×26.5 B32653A2332+*** 2720 2800 2880
4.7 6.0 ×15.0 ×26.5 B32653A2472+*** 2720 2800 2880
6.8 8.5 ×16.5 ×26.5 B32653A2682+*** 1920 2000 2040
10 10.5 ×16.5 ×26.5 B32653A2103+*** 1560 1600 2160
15 11.0 ×20.5 ×26.5 B32653A2153+*** 1480 1400 2040
22 14.5 ×29.5 ×26.5 B32653A2223+000 1040
33 14.5 ×29.5 ×26.5 B32653A2333+000 1040
2000 1000 2.2 6.0 ×15.0 ×26.5 B32653A8222+*** 2720 2800 2880
3.3 6.0 ×15.0 ×26.5 B32653A8332+*** 2720 2800 2880
4.7 8.5 ×16.5 ×26.5 B32653A8472+*** 1920 2000 2040
6.8 10.5 ×16.5 ×26.5 B32653A8682+*** 1560 1600 2160
10 10.5 ×20.5 ×26.5 B32653A8103+*** 1560 1600 2160
12 12.0 ×22.0 ×26.5 B32653A8123+000 1800
15 14.5 ×29.5 ×26.5 B32653A8153+000 1040
22 14.5 ×29.5 ×26.5 B32653A8223+000 1040
B32653
High pulse (wound)
Page 18 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack pcs./
MOQ
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
250 160 1500 11.0 ×21.0 ×31.5 B32654A3155+*** 1400 1280
2200 12.5 ×21.5 ×31.5 B32654A3225+*** 1200 1120
3300 15.0 ×24.5 ×31.5 B32654A3335+000 960
4700 18.0 ×27.5 ×31.5 B32654A3475+000 800
5600 19.0 ×30.0 ×31.5 B32654A3565+000 720
6800 22.0 ×36.5 ×31.5 B32654A3685+000 640
8200 22.0 ×36.5 ×31.5 B32654A3825+000 640
400 200 1000 11.0 ×21.0 ×31.5 B32654A4105+*** 1400 1280
1500 12.5 ×21.5 ×31.5 B32654A4155+*** 1200 1120
2200 14.0 ×24.5 ×31.5 B32654A4225+*** 1000 1040
3300 19.0 ×30.0 ×31.5 B32654A4335+000 720
4700 22.0 ×36.5 ×31.5 B32654A4475+000 640
5600 22.0 ×36.5 ×31.5 B32654A4565+000 640
630 250 680 11.0 ×21.0 ×31.5 B32654A6684+*** 1400 1280
1000 13.5 ×23.0 ×31.5 B32654A6105+*** 1000 1040
1500 18.0 ×27.5 ×31.5 B32654A6155+000 800
2200 18.0 ×33.0 ×31.5 B32654A6225+000 800
2700 22.0 ×36.5 ×31.5 B32654A6275+000 640
3300 22.0 ×36.5 ×31.5 B32654A6335K000 640
1000 250 220 11.0 ×21.0 ×31.5 B32654A0224+*** 1400 1280
330 11.0 ×21.0 ×31.5 B32654A0334+*** 1400 1280
470 14.0 ×24.5 ×31.5 B32654A0474+*** 1000 1040
680 18.0 ×27.5 ×31.5 B32654A0684+000 800
820 19.0 ×30.0 ×31.5 B32654A0824+000 720
1000 21.0 ×31.0 ×31.5 B32654A0105+000 720
1200 22.0 ×36.5 ×31.5 B32654A0125+000 640
1500 22.0 ×36.5 ×31.5 B32654A0155K000 640
B32654
High pulse (wound)
Page 19 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack pcs./
MOQ
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
K=±10%
J= ±5%
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 1 mm)
1250 500 100 11.0 ×21.0 ×31.5 B32654A7104+*** 1400 1280
150 11.0 ×21.0 ×31.5 B32654A7154+*** 1400 1280
220 14.0 ×24.5 ×31.5 B32654A7224+*** 1000 1040
330 18.0 ×27.5 ×31.5 B32654A7334+000 800
470 21.0 ×31.0 ×31.5 B32654A7474+000 720
560 22.0 ×36.5 ×31.5 B32654A7564+000 640
680 22.0 ×36.5 ×31.5 B32654A7684+000 640
1600 500 47 11.0 ×21.0 ×31.5 B32654A1473+*** 1400 1280
68 11.0 ×21.0 ×31.5 B32654A1683+*** 1400 1280
100 14.0 ×24.5 ×31.5 B32654A1104+*** 1000 1040
150 18.0 ×27.5 ×31.5 B32654A1154+000 800
220 21.0 ×31.0 ×31.5 B32654A1224+000 720
2000 700 22 11.0 ×21.0 ×31.5 B32654A2223+*** 1400 1280
33 13.5 ×23.0 ×31.5 B32654A2333+*** 1000 1040
47 18.0 ×27.5 ×31.5 B32654A2473+000 800
68 19.0 ×30.0 ×31.5 B32654A2683+000 720
82 22.0 ×36.5 ×31.5 B32654A2823+000 640
100 22.0 ×36.5 ×31.5 B32654A2104+000 640
B32654
High pulse (wound)
Page 20 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
250 160 2700 12.0 ×22.0 ×42.0 B32656A3275+000 1620
3000 12.0 ×22.0 ×42.0 B32656A3305+000 1620
3300 14.0 ×25.0 ×42.0 B32656A3335+000 1380
4000 14.0 ×25.0 ×42.0 B32656A3405+000 1380
4000 24.0 ×15.0 ×42.0 B32656T3405+000 1040
4700 16.0 ×28.5 ×42.0 B32656A3475+000 800
5600 16.0 ×28.5 ×42.0 B32656A3565+000 800
5600 24.0 ×19.0 ×42.0 B32656T3565+000 780
6800 18.0 ×32.5 ×42.0 B32656A3685+000 720
8000 18.0 ×32.5 ×42.0 B32656A3805+000 720
10000 20.0 ×39.5 ×42.0 10.2 B32656G3106+000 640
10000 20.0 ×39.5 ×42.0 B32656A3106+000 640
12000 20.0 ×39.5 ×42.0 10.2 B32656G3126K000 640
12000 20.0 ×39.5 ×42.0 B32656A3126K000 640
15000 28.0 ×37.0 ×42.0 10.2 B32656G3156K000 440
15000 28.0 ×37.0 ×42.0 B32656A3156K000 440
17000 28.0 ×42.5 ×42.0 10.2 B32656G3176+000 440
17000 28.0 ×42.5 ×42.0 B32656A3176+000 440
20000 30.0 ×45.0 ×42.0 20.3 B32656G3206+000 400
20000 30.0 ×45.0 ×42.0 B32656A3206+000 400
24000 33.0 ×48.0 ×42.0 20.3 B32656G3246+000 180
24000 33.0 ×48.0 ×42.0 B32656A3246+000 180
B32656
High pulse (wound)
Page 21 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
400 200 2000 12.0 ×22.0 ×42.0 B32656A4205+000 1620
2700 14.0 ×25.0 ×42.0 B32656A4275+000 1380
2700 24.0 ×15.0 ×42.0 B32656T4275+000 1040
3500 24.0 ×19.0 ×42.0 B32656T4355+000 780
4000 16.0 ×28.5 ×42.0 B32656A4405+000 800
5600 18.0 ×32.5 ×42.0 B32656A4565+000 720
7500 20.0 ×39.5 ×42.0 10.2 B32656G4755+000 640
7500 20.0 ×39.5 ×42.0 B32656A4755+000 640
10000 28.0 ×37.0 ×42.0 10.2 B32656G4106+000 440
10000 28.0 ×37.0 ×42.0 B32656A4106+000 440
12000 28.0 ×42.5 ×42.0 10.2 B32656G4126+000 440
12000 28.0 ×42.5 ×42.0 B32656A4126+000 440
14000 30.0 ×45.0 ×42.0 20.3 B32656G4146+000 400
14000 30.0 ×45.0 ×42.0 B32656A4146+000 400
17000 33.0 ×48.0 ×42.0 20.3 B32656G4176+000 180
17000 33.0 ×48.0 ×42.0 B32656A4176+000 180
630 250 1000 12.0 ×22.0 ×42.0 B32656A6105+000 1620
1500 14.0 ×25.0 ×42.0 B32656A6155+000 1380
1500 24.0 ×15.0 ×42.0 B32656T6155+000 1040
2200 16.0 ×28.5 ×42.0 B32656A6225+000 800
2200 24.0 ×19.0 ×42.0 B32656T6225+000 780
3000 18.0 ×32.5 ×42.0 B32656A6305+000 720
4000 20.0 ×39.5 ×42.0 10.2 B32656G6405+000 640
4000 20.0 ×39.5 ×42.0 B32656A6405+000 640
5600 28.0 ×37.0 ×42.0 10.2 B32656G6565+000 440
5600 28.0 ×37.0 ×42.0 B32656A6565+000 440
7000 28.0 ×42.5 ×42.0 10.2 B32656G6705K000 440
7000 28.0 ×42.5 ×42.0 B32656A6705K000 440
8000 30.0 ×45.0 ×42.0 20.3 B32656G6805+000 400
8000 30.0 ×45.0 ×42.0 B32656A6805+000 400
10000 33.0 ×48.0 ×42.0 20.3 B32656G6106K000 180
10000 33.0 ×48.0 ×42.0 B32656A6106K000 180
B32656
High pulse (wound)
Page 22 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
750 350 470 12.0 ×22.0 ×42.0 B32656A5474+000 1620
560 12.0 ×22.0 ×42.0 B32656A5564+000 1620
680 12.0 ×22.0 ×42.0 B32656A5684+000 1620
820 14.0 ×25.0 ×42.0 B32656A5824+000 1380
1000 16.0 ×28.5 ×42.0 B32656A5105+000 800
1000 24.0 ×15.0 ×42.0 B32656T5105K000 1040
1200 16.0 ×28.5 ×42.0 B32656A5125+000 800
1200 24.0 ×19.0 ×42.0 B32656T5125+000 780
1500 18.0 ×32.5 ×42.0 B32656A5155+000 720
1800 18.0 ×32.5 ×42.0 B32656A5185+000 720
2200 20.0 ×39.5 ×42.0 10.2 B32656G5225+000 640
2200 20.0 ×39.5 ×42.0 B32656A5225+000 640
2500 20.0 ×39.5 ×42.0 10.2 B32656G5255+000 640
2500 20.0 ×39.5 ×42.0 B32656A5255+000 640
2700 28.0 ×37.0 ×42.0 10.2 B32656G5275+000 440
2700 28.0 ×37.0 ×42.0 B32656A5275+000 440
3300 28.0 ×37.0 ×42.0 10.2 B32656G5335+000 440
3300 28.0 ×37.0 ×42.0 B32656A5335+000 440
4000 28.0 ×42.5 ×42.0 10.2 B32656G5405+000 440
4000 28.0 ×42.5 ×42.0 B32656A5405+000 440
4700 30.0 ×45.0 ×42.0 20.3 B32656G5475+000 400
4700 30.0 ×45.0 ×42.0 B32656A5475+000 400
5600 33.0 ×48.0 ×42.0 20.3 B32656G5565+000 180
5600 33.0 ×48.0 ×42.0 B32656A5565+000 180
B32656
High pulse (wound)
Page 23 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
850 450 220 12.0 ×22.0 ×42.0 B32656A8224+000 1620
330 12.0 ×22.0 ×42.0 B32656A8334+000 1620
470 12.0 ×22.0 ×42.0 B32656A8474+000 1620
680 16.0 ×28.5 ×42.0 B32656A8684+000 800
680 24.0 ×15.0 ×42.0 B32656T8684+000 1040
820 24.0 ×19.0 ×42.0 B32656T8824+000 780
1000 18.0 ×32.5 ×42.0 B32656A8105+000 720
1200 18.0 ×32.5 ×42.0 B32656A8125+000 720
1500 20.0 ×39.5 ×42.0 10.2 B32656G8155+000 640
1500 20.0 ×39.5 ×42.0 B32656A8155+000 640
1800 20.0 ×39.5 ×42.0 10.2 B32656G8185+000 640
1800 20.0 ×39.5 ×42.0 B32656A8185+000 640
2200 28.0 ×37.0 ×42.0 10.2 B32656G8225+000 440
2200 28.0 ×37.0 ×42.0 B32656A8225+000 440
2500 28.0 ×42.5 ×42.0 10.2 B32656G8255+000 440
2500 28.0 ×42.5 ×42.0 B32656A8255+000 440
2700 30.0 ×45.0 ×42.0 20.3 B32656G8275+000 400
2700 30.0 ×45.0 ×42.0 B32656A8275+000 400
3000 30.0 ×45.0 ×42.0 20.3 B32656G8305+000 400
3000 30.0 ×45.0 ×42.0 B32656A8305+000 400
3300 33.0 ×48.0 ×42.0 20.3 B32656G8335+000 180
3300 33.0 ×48.0 ×42.0 B32656A8335+000 180
3800 33.0 ×48.0 ×42.0 20.3 B32656G8385+000 180
3800 33.0 ×48.0 ×42.0 B32656A8385+000 180
B32656
High pulse (wound)
Page 24 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
1000 500 330 12.0 ×22.0 ×42.0 B32656A0334+000 1620
470 14.0 ×25.0 ×42.0 B32656A0474+000 1380
470 24.0 ×15.0 ×42.0 B32656T0474+000 1040
680 16.0 ×28.5 ×42.0 B32656A0684+000 800
680 24.0 ×19.0 ×42.0 B32656T0684+000 780
1000 20.0 ×39.5 ×42.0 10.2 B32656G0105+000 640
1000 20.0 ×39.5 ×42.0 B32656A0105+000 640
1200 28.0 ×37.0 ×42.0 10.2 B32656G0125+000 440
1200 28.0 ×37.0 ×42.0 B32656A0125+000 440
1500 28.0 ×37.0 ×42.0 10.2 B32656G0155+000 440
1500 28.0 ×37.0 ×42.0 B32656A0155+000 440
2200 30.0 ×45.0 ×42.0 20.3 B32656G0225+000 400
2200 30.0 ×45.0 ×42.0 B32656A0225+000 400
2700 30.0 ×45.0 ×42.0 20.3 B32656G0275M000 400
2700 30.0 ×45.0 ×42.0 B32656A0275M000 400
2700 33.0 ×48.0 ×42.0 20.3 B32656G0275+000 180
2700 33.0 ×48.0 ×42.0 B32656A0275+000 180
B32656
High pulse (wound)
Page 25 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
1250 500 150 12.0 ×22.0 ×42.0 B32656A7154+000 1620
220 14.0 ×25.0 ×42.0 B32656A7224+000 1380
270 24.0 ×15.0 ×42.0 B32656T7274+000 1040
330 16.0 ×28.5 ×42.0 B32656A7334+000 800
390 24.0 ×19.0 ×42.0 B32656T7394+000 780
470 18.0 ×32.5 ×42.0 B32656A7474+000 720
680 20.0 ×39.5 ×42.0 10.2 B32656G7684+000 640
680 20.0 ×39.5 ×42.0 B32656A7684+000 640
820 28.0 ×37.0 ×42.0 10.2 B32656G7824+000 440
820 28.0 ×37.0 ×42.0 B32656A7824+000 440
1000 28.0 ×37.0 ×42.0 10.2 B32656G7105+000 440
1000 28.0 ×37.0 ×42.0 B32656A7105+000 440
1200 28.0 ×42.5 ×42.0 10.2 B32656G7125+000 440
1200 28.0 ×42.5 ×42.0 B32656A7125+000 440
1500 30.0 ×45.0 ×42.0 20.3 B32656G7155+000 400
1500 30.0 ×45.0 ×42.0 B32656A7155+000 400
1800 33.0 ×48.0 ×42.0 20.3 B32656G7185K000 180
1800 33.0 ×48.0 ×42.0 B32656A7185K000 180
B32656
High pulse (wound)
Page 26 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
1600 600 100 12.0 ×22.0 ×42.0 B32656J1104+000 1620
150 14.0 ×25.0 ×42.0 B32656J1154+000 1380
150 24.0 ×15.0 ×42.0 B32656T1154+000 1040
220 16.0 ×28.5 ×42.0 B32656J1224+000 800
220 24.0 ×19.0 ×42.0 B32656T1224+000 780
330 20.0 ×39.5 ×42.0 10.2 B32656G1334+000 640
330 20.0 ×39.5 ×42.0 B32656J1334+000 640
470 28.0 ×37.0 ×42.0 10.2 B32656G1474+000 440
470 28.0 ×37.0 ×42.0 B32656J1474+000 440
560 28.0 ×37.0 ×42.0 10.2 B32656G1564+000 440
560 28.0 ×37.0 ×42.0 B32656J1564+000 440
680 28.0 ×42.5 ×42.0 10.2 B32656G1684+000 440
680 28.0 ×42.5 ×42.0 B32656J1684+000 440
820 30.0 ×45.0 ×42.0 20.3 B32656G1824+000 400
820 30.0 ×45.0 ×42.0 B32656J1824+000 400
900 33.0 ×48.0 ×42.0 20.3 B32656G1905+000 180
900 33.0 ×48.0 ×42.0 B32656J1905+000 180
2000 700 68 12.0 ×22.0 ×42.0 B32656J2683+000 1620
100 14.0 ×25.0 ×42.0 B32656J2104+000 1380
100 24.0 ×15.0 ×42.0 B32656T2104+000 1040
120 24.0 ×19.0 ×42.0 B32656T2124+000 780
150 18.0 ×32.5 ×42.0 B32656J2154+000 720
220 20.0 ×39.5 ×42.0 10.2 B32656G2224+000 640
220 20.0 ×39.5 ×42.0 B32656J2224+000 640
330 28.0 ×37.0 ×42.0 10.2 B32656G2334+000 440
330 28.0 ×37.0 ×42.0 B32656J2334+000 440
470 30.0 ×45.0 ×42.0 20.3 B32656G2474+000 400
470 30.0 ×45.0 ×42.0 B32656J2474+000 400
560 33.0 ×48.0 ×42.0 20.3 B32656G2564+000 180
560 33.0 ×48.0 ×42.0 B32656J2564+000 180
B32656
High pulse (wound)
Page 27 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Ordering codes and packing units (lead spacing 52.5 mm)
VR
VDC
VRMS
f≤1 kHz
VAC
CR
nF
Max. dimensions
w×h×l
mm
P1
mm
Ordering code
(composition see
below)
Untaped
pcs./MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K=±10%
J= ±5%
250 160 30000 30.0 ×45.0 ×57.5 20.3 B32658G3306+000 280
40000 35.0 ×50.0 ×57.5 20.3 B32658G3406K000 108
400 200 20000 30.0 ×45.0 ×57.5 20.3 B32658G4206+000 280
26000 35.0 ×50.0 ×57.5 20.3 B32658G4266+000 108
630 250 12000 30.0 ×45.0 ×57.5 20.3 B32658G6126K000 280
15000 35.0 ×50.0 ×57.5 20.3 B32658G6156+000 108
750 350 6800 30.0 ×45.0 ×57.5 20.3 B32658G5685+000 280
9000 35.0 ×50.0 ×57.5 20.3 B32658G5905+000 108
850 450 4700 30.0 ×45.0 ×57.5 20.3 B32658G8475+000 280
5600 35.0 ×50.0 ×57.5 20.3 B32658G8565+000 108
6000 35.0 ×50.0 ×57.5 20.3 B32658G8605+000 108
1000 500 3300 30.0 ×45.0 ×57.5 20.3 B32658G0335+000 280
4500 35.0 ×50.0 ×57.5 20.3 B32658G0455+000 108
1250 500 2000 30.0 ×45.0 ×57.5 20.3 B32658G7205+000 280
2200 35.0 ×50.0 ×57.5 20.3 B32658G7225+000 108
2700 35.0 ×50.0 ×57.5 20.3 B32658G7275+000 108
1600 600 1000 30.0 ×45.0 ×57.5 20.3 B32658G1105+000 280
1200 30.0 ×45.0 ×57.5 20.3 B32658G1125K000 280
1500 35.0 ×50.0 ×57.5 20.3 B32658G1155+000 108
2000 700 680 30.0 ×45.0 ×57.5 20.3 B32658G2684+000 280
820 35.0 ×50.0 ×57.5 20.3 B32658G2824+000 108
1000 35.0 ×50.0 ×57.5 20.3 B32658G2105K000 108
B32658
High pulse (wound)
Page 28 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Technical data
Reference standard: IEC 60384-16:2005 and AEC-Q200D. All data given atT=20°C, unless
otherwise specified.
Operating temperature range Max. operating temperature Top,max +110 °C
Upper category temperature Tmax +100 °C
Lower category temperature Tmin 55 °C
Rated temperature TR+85 °C
Dissipation factor tan δ(in 10-3)
at 20 °C (upper limit values)
at ≤27 nF 27 nF<CR≤0.1 μF 0.1 μF<CR≤1μF CR>1 μF
1 kHz 0.8 0.8 0.8 0.8
10 kHz 1.0 1.0 1.0
100 kHz 2.0 3.0
Insulation resistance Rins
or time constant τ=C
RRins
at 20 °C, rel. humidity ≤65%
(minimum as-delivered values)
CR≤0.33 μF CR> 0.33 μF
100 GΩ30000 s
DC test voltage 1.6 VR,2s
Capacitance tolerance codes J=±5%
K=±10%
M=±20%
Category voltage VC
(continuous operation with
VDC or VAC atf≤1 kHz)
Top (°C) DC voltage derating AC voltage derating
Top ≤85 VC=V
RVC,RMS=VRMS
85<Top≤100 VC=V
R(165Top)/80 VC,RMS=VRMS (165Top)/80
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤1 kHz)
Top (°C) DC voltage (max. hours) AC voltage (max. hours)
Top ≤85 Vop = 1.25 VC(2000 h) Vop = 1.0 VC,RMS (2000 h)
85<Top≤100 Vop = 1.25 VC(1000 h) Vop = 1.0 VC,RMS (1000 h)
Biased humidity 1000 h / 40 °C / 93% relative humidity with VR,DC
Limit values after biased
humidity test
Capacitance change ΔC/C≤5%
Dissipation factor change Δtan δ≤2.0 10-3 (at 1 kHz)
Insulation resistance Rins
or time constant τ=C
RRins
≥50% of minimum
as-delivered values
Reliability:
Failure rate λ
Service life tSL
1 fit (≤110-9/h) at 0.5 VR,40°C
200 000 h at 1.0 VR,85°C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Failure criteria:
Total failure Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change ΔC/C> 10%
Dissipation factor tan δ>4upper limit value
Insulation resistance Rins
or time constant τ=C
RRins
< 1500 MΩ(CR≤0.33 μF)
<500s(C
R> 0.33 μF)
B32651 ... B32658
High pulse (wound)
Page 29 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/μs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/μs.
Note:
The values of dV/dt and k0provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm 52.5 mm
VRVRMS
VDC VAC dV/dt in V/μs
250 160 200 120 50 36 24
400 200 300 180 100 55 36
630 250 400 300 150 80 50
750 350 250 160
850 450 340 220
1000 250 975 600 300
500 400 265
1250 450 4000
500 1850 1150 600 500 350
1600 500 4500 2400 1000
600 600 400
700 5200
2000 700 8000 7000 2300 700 475
1000 7500
B32651 ... B32658
High pulse (wound)
Page 30 of 61Please read Cautions and warnings and
Important notes at the end of this document.
k0values
Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm 52.5 mm
VRVRMS
VDC VAC k0in V2/μs
250 160 100 000 60 000 25 000 18 000 12 000
400 200 250 000 200 000 110 000 44 000 28 800
630 250 500 000 350 000 250 000 100 800 63 000
750 350 375 000 240 000
850 450 578 000 374 000
1000 250 3 000 000 1 500 000 1 000 000
500 800 000 530 000
1250 450 25 000 000
500 9 000 000 3 750 000 2 000 000 1 250 000 875 000
1600 500 20 000 000 10 000 000 4 000 000
600 1 920 000 1 280 000
700 28 000 000
2000 700 60 000 000 40 000 000 15 000 000 2 800 000 1 900 000
1000 50 000 000
Impedance Z versus frequency f
(typical values)
B32651 ... B32658
High pulse (wound)
Page 31 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
1250 V DC/450 V AC
B32651
High pulse (wound)
Page 32 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
250 V DC/160 V AC 400 V DC/200 V AC
630 V DC/250 V AC 1000 V DC/250 V AC
B32652
High pulse (wound)
Page 33 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
1250 V DC/500 V AC 1600 V DC/500 V AC
1600 V DC/700 V AC 2000 V DC/700 V AC
B32652
High pulse (wound)
Page 34 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
250 V DC/160 V AC 400 V DC/200 V AC
630 V DC/250 V AC 1000 V DC/250 V AC
B32653
High pulse (wound)
Page 35 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
1250 V DC/500 V AC 1600 V DC/500 V AC
2000 V DC/700 V AC 2000 V DC/1000 V AC
B32653
High pulse (wound)
Page 36 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
250 V DC/160 V AC 400 V DC/200 V AC
630 V DC/250 V AC 1000 V DC/250 V AC
B32654
High pulse (wound)
Page 37 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
1250 V DC/500 V AC 1600 V DC/500 V AC
2000 V DC/700 V AC
B32654
High pulse (wound)
Page 38 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
250 V DC/160 V AC 250 V DC/160 V AC
250 V DC/160 V AC
B32656
High pulse (wound)
Page 39 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
400 V DC/200 V AC 400 V DC/200 V AC
400 V DC/200 V AC
B32656
High pulse (wound)
Page 40 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
630 V DC/250 V AC 630 V DC/250 V AC
630 V DC/250 V AC
B32656
High pulse (wound)
Page 41 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
750 V DC/350 V AC 750 V DC/350 V AC
750 V DC/350 V AC
B32656
High pulse (wound)
Page 42 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
850 V DC/450 V AC 850 V DC/450 V AC
850 V DC/450 V AC
B32656
High pulse (wound)
Page 43 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
1000 V DC/500 V AC 1000 V DC/500 V AC
1000 V DC/500 V AC
B32656
High pulse (wound)
Page 44 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
1250 V DC/500 V AC 1250 V DC/500 V AC
1250 V DC/500 V AC
B32656
High pulse (wound)
Page 45 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
1600 V DC/600 V AC 1600 V DC/600 V AC
1600 V DC/600 V AC
B32656
High pulse (wound)
Page 46 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
2000 V DC/700 V AC 2000 V DC/700 V AC
2000 V DC/700 V AC
B32656
High pulse (wound)
Page 47 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 52.5 mm
250 V DC/160 V AC 400 V DC/200 V AC
630 V DC/250 V AC 750 V DC/350 V AC
B32658
High pulse (wound)
Page 48 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 52.5 mm
850 V DC/450 V AC 1000 V DC/500 V AC
1250 V DC/500 V AC 1600 V DC/600 V AC
B32658
High pulse (wound)
Page 49 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA≤90 °C)
For TA>90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 52.5 mm
2000 V DC/700 V AC
B32658
High pulse (wound)
Page 50 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Mounting guidelines
1 Soldering
1.1 Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature
is far higher than the upper category temperature of the capacitors, the terminal wires should be
cut off from the capacitor before the ageing procedure to prevent the solderability being impaired
by the products of any capacitor decomposition that might occur.
Solder bath temperature 235 ±5°C
Soldering time 2.0 ±0.5 s
Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane
Evaluation criteria:
Visual inspection Wetting of wire surface by new solder ≥90%,
free-flowing solder
1.2 Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1.
Conditions:
Series Solder bath temperature Soldering time
MKT boxed (except 2.5 ×6.5 ×7.2 mm)
coated
uncoated (lead spacing >10 mm)
260 ±5°C 10 ±1s
MFP
MKP (lead spacing >7.5 mm)
MKT boxed (case 2.5 ×6.5 ×7.2 mm) 5±1s
MKP
MKT
(lead spacing ≤7.5 mm)
uncoated (lead spacing ≤10 mm)
insulated (B32559)
<4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤10 mm) and
insulated (B32559)
B32651 ... B32658
High pulse (wound)
Page 51 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane
Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between
capacitor body and liquid solder
Evaluation criteria:
Visual inspection No visible damage
ΔC/C0
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
tan δAs specified in sectional specification
1.3 General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
B32651 ... B32658
High pulse (wound)
Page 52 of 61Please read Cautions and warnings and
Important notes at the end of this document.
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
Recommendations
As a reference, the recommended wave soldering profile for our film capacitors is as follows:
B32651 ... B32658
High pulse (wound)
Page 53 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Body temperature should follow the description below:
MKP capacitor
During pre-heating: Tp≤110 °C
During soldering: Ts≤120 °C, ts≤45 s
MKT capacitor
During pre-heating: Tp≤125 °C
During soldering: Ts≤160 °C, ts≤45 s
When SMD components are used together with leaded ones, the film capacitors should not pass
into the SMD adhesive curing oven. The leaded components should be assembled after the SMD
curing step.
Leaded film capacitors are not suitable for reflow soldering.
In order to ensure proper conditions for manual or selective soldering, the body temperature of
the capacitor (Ts) must be ≤120 °C.
One recommended condition for manual soldering is that the tip of the soldering iron should
be <360 °C and the soldering contact time should be no longer than 3 seconds.
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please refer to our Film Capacitors Data Book in case more details are needed.
B32651 ... B32658
High pulse (wound)
Page 54 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
Consult us if application is with severe temperature and humidity condition.
There are no serviceable or repairable parts inside the capacitor. Opening the capacitor or
any attempts to open or repair the capacitor will void the warranty and liability of
TDK Electronics.
Please note that the standards referred to in this publication may have been revised in the
meantime.
The table below summarizes the safety instructions that must always be observed. A detailed
description can be found in the relevant sections of the chapters "General technical information"
and "Mounting guidelines".
Topic Safety information Reference chapter
"General technical
information"
Storage
conditions
Make sure that capacitors are stored within the
specified range of time, temperature and humidity
conditions.
4.5
"Storage conditions"
Flammability Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the capacitors
(active flammability) and consider the flammability of
materials.
5.3
"Flammability"
Resistance to
vibration
Do not exceed the tested ability to withstand vibration.
The capacitors are tested to IEC 60068-2-6:2007.
TDK Electronics offers film capacitors specially
designed for operation under more severe vibration
regimes such as those found in automotive
applications. Consult our catalog "Film Capacitors for
Automotive Electronics".
5.2
"Resistance to
vibration"
B32651 ... B32658
High pulse (wound)
Page 55 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Topic Safety information Reference chapter
"Mounting guidelines"
Soldering Do not exceed the specified time or temperature limits
during soldering.
1 "Soldering"
Cleaning Use only suitable solvents for cleaning capacitors. 2 "Cleaning"
Embedding of
capacitors in
finished
assemblies
When embedding finished circuit assemblies in plastic
resins, chemical and thermal influences must be taken
into account.
Caution: Consult us first, if you also wish to embed
other uncoated component types!
3 "Embedding of
capacitors in finished
assemblies"
Display of ordering codes for TDK Electronics products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications, on the company website, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the order-
ing codes are due to different processes employed and do not affect the specifications of the re-
spective products.
Detailed information can be found on the Internet under
www.tdk-electronics.tdk.com/orderingcodes.
B32651 ... B32658
High pulse (wound)
Page 56 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Symbols and terms
Symbol English German
αHeat transfer coefficient Wärmeübergangszahl
αCTemperature coefficient of capacitance Temperaturkoeffizient der Kapazität
ACapacitor surface area Kondensatoroberfläche
βCHumidity coefficient of capacitance Feuchtekoeffizient der Kapazität
CCapacitance Kapazität
CRRated capacitance Nennkapazität
ΔCAbsolute capacitance change Absolute Kapazitätsänderung
ΔC/C Relative capacitance change (relative
deviation of actual value)
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
ΔC/CRCapacitance tolerance (relative deviation
from rated capacitance)
Kapazitätstoleranz (relative Abweichung
vom Nennwert)
dt Time differential Differentielle Zeit
ΔtTime interval Zeitintervall
ΔTAbsolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
Δtan δAbsolute change of dissipation factor Absolute Änderung des Verlustfaktors
ΔVAbsolute voltage change Absolute Spannungsänderung
dV/dt Time differential of voltage function (rate
of voltage rise)
Differentielle Spannungsänderung
(Spannungsflankensteilheit)
ΔV/ΔtVoltage change per time interval Spannungsänderung pro Zeitintervall
EActivation energy for diffusion Aktivierungsenergie zur Diffusion
ESL Self-inductance Eigeninduktivität
ESR Equivalent series resistance Ersatz-Serienwiderstand
fFrequency Frequenz
f1Frequency limit for reducing permissible
AC voltage due to thermal limits
Grenzfrequenz für thermisch bedingte
Reduzierung der zulässigen
Wechselspannung
f2Frequency limit for reducing permissible
AC voltage due to current limit
Grenzfrequenz für strombedingte
Reduzierung der zulässigen
Wechselspannung
frResonant frequency Resonanzfrequenz
FDThermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FTDerating factor Deratingfaktor
iCurrent (peak) Stromspitze
ICCategory current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
B32651 ... B32658
High pulse (wound)
Page 57 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Symbol English German
IRMS (Sinusoidal) alternating current,
root-mean-square value
(Sinusförmiger) Wechselstrom
izCapacitance drift Inkonstanz der Kapazität
k0Pulse characteristic Impulskennwert
LSSeries inductance Serieninduktivität
λFailure rate Ausfallrate
λ0Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest Failure rate, determined by tests Experimentell ermittelte Ausfallrate
Pdiss Dissipated power Abgegebene Verlustleistung
Pgen Generated power Erzeugte Verlustleistung
QHeat energy Wärmeenergie
ρDensity of water vapor in air Dichte von Wasserdampf in Luft
RUniversal molar constant for gases Allg. Molarkonstante für Gas
ROhmic resistance of discharge circuit Ohmscher Widerstand des
Entladekreises
RiInternal resistance Innenwiderstand
Rins Insulation resistance Isolationswiderstand
RPParallel resistance Parallelwiderstand
RSSeries resistance Serienwiderstand
Sseverity (humidity test) Schärfegrad (Feuchtetest)
tTime Zeit
TTemperature Temperatur
τTime constant Zeitkonstante
tan δDissipation factor Verlustfaktor
tan δDDielectric component of dissipation
factor
Dielektrischer Anteil des Verlustfaktors
tan δPParallel component of dissipation factor Parallelanteil des Verlfustfaktors
tan δSSeries component of dissipation factor Serienanteil des Verlustfaktors
TATemperature of the air surrounding the
component
Temperatur der Luft, die das Bauteil
umgibt
Tmax Upper category temperature Obere Kategorietemperatur
Tmin Lower category temperature Untere Kategorietemperatur
tOL Operating life at operating temperature
and voltage
Betriebszeit bei Betriebstemperatur und
-spannung
Top Operating temperature, TA+ΔT Beriebstemperatur, TA+ΔT
TRRated temperature Nenntemperatur
Tref Reference temperature Referenztemperatur
tSL Reference service life Referenz-Lebensdauer
B32651 ... B32658
High pulse (wound)
Page 58 of 61Please read Cautions and warnings and
Important notes at the end of this document.
Symbol English German
VAC AC voltage Wechselspannung
VCCategory voltage Kategoriespannung
VC,RMS Category AC voltage (Sinusförmige)
Kategorie-Wechselspannung
VCD Corona-discharge onset voltage Teilentlade-Einsatzspannung
Vch Charging voltage Ladespannung
VDC DC voltage Gleichspannung
VFB Fly-back capacitor voltage Spannung (Flyback)
ViInput voltage Eingangsspannung
VoOutput voltage Ausgangssspannung
Vop Operating voltage Betriebsspannung
VpPeak pulse voltage Impuls-Spitzenspannung
Vpp Peak-to-peak voltage Impedance Spannungshub
VRRated voltage Nennspannung
RAmplitude of rated AC voltage Amplitude der Nenn-Wechselspannung
VRMS (Sinusoidal) alternating voltage,
root-mean-square value
(Sinusförmige) Wechselspannung
VSC S-correction voltage Spannung bei Anwendung "S-correction"
Vsn Snubber capacitor voltage Spannung bei Anwendung
"Beschaltung"
ZImpedance Scheinwiderstand
Lead spacing Rastermaß
B32651 ... B32658
High pulse (wound)
Page 59 of 61Please read Cautions and warnings and
Important notes at the end of this document.
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, we are either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on
the customer to check and decide whether a product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have
any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General
Terms and Conditions of Supply.
Important notes
Page 60 of 61
7. Our manufacturing sites serving the automotive business apply the IATF 16949
standard. The IATF certifications confirm our compliance with requirements regarding the
quality management system in the automotive industry. Referring to customer requirements
and customer specific requirements (“CSR”) TDK always has and will continue to have the
policy of respecting individual agreements. Even if IATF 16949 may appear to support the
acceptance of unilateral requirements, we hereby like to emphasize that only requirements
mutually agreed upon can and will be implemented in our Quality Management System.
For clarification purposes we like to point out that obligations from IATF 16949 shall only
become legally binding if individually agreed upon.
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP,
CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine,
PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
ThermoFuse, WindCap are trademarks registered or pending in Europe and
in other countries. Further information will be found on the Internet at
www.tdk-electronics.tdk.com/trademarks.
Release 2018-10
Important notes
Page 61 of 61
