SMV1143-011LF - Skyworks Solutions, Inc.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200056G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 9, 2009 1

DATA SHEET

SMV114x Series: Hyperabrupt Junction Tuning Varactors

Applications

 High volume commercial systems

Features

 Frequency linear design

 Low series resistance

 Packages rated MSL1, 260 °C per JEDEC J-STD-020

Skyworks offers lead (Pb)-free, RoHS (Restriction of

Hazardous Substances) compliant packaging.

Description

The SMV114x series of silicon hyperabrupt junction varactor

diodes is specifically designed with an increasing gamma versus

voltage characteristic. This results in improved Voltage-Controlled

Oscillator (VCO) frequency-voltage linearity compared to a

conventional hyperabrupt junction varactor.

The SMV114x family of varactors is characterized for capacitance

and resistance over temperature.

Table 1 describes the various packages and markings of

theSMV114x varactors.

Table 1. Packaging and Marking

Single Single

SC-79 SOD-323

SMV1142-011LF

Marking: GU

SMV-1143-011LF

Marking: GV

SMV-1144-011LF

Marking: GW

SMV1145-079LF

Marking: Cathode

SMV1145-011LF

Marking: GA

SMV1147-079LF

Marking: Cathode

SMV1147-011LF

Marking: GY

SMV1148-011LF

Marking: GZ

LS = 0.7 nH LS = 1.5 nH

LF denotes lead (Pb)-free, RoHS-compliant packaging option as an alternative to

the standard Skyworks tin/lead (Sn/Pb) packaging.

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 September 9, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200132E

Table 2. SMV114x Absolute Maximum Ratings

Parameter Symbol Minimum Typical Maximum Units

Reverse voltage VR 12 V

Forward current IF 20 mA

Power dissipation PDIS 250 mW

Operating temperature TOP –55 +125 C

Storage temperature TSTG –55 +150 C

Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The

SMV114x varactors are Class 0 Human Body Model (HBM) ESD devices.

Table 3. SMV114x Electrical Specifications (Note 1) (Note 2)

(TOP = 25 C, Unless Otherwise Noted)

CT @ 1 V

(pF)

CT @ 3 V

(pF)

CT @ 6 V

(pF)

CT @ 1 V

CT @ 3 V

Ratio (pF)

CT @ 1 V

CT @ 6 V

Ratio (pF)

RS @ 3 V,

500 MHz

(Ω)

Q @ 3 V,

50 MHz

Part Number

Minimum Maximum Typical Typical Minimum Maximum Minimum Maximum Maximum Typical

SMV1142 8.20 10.0 5.80 3.50 1.50 1.65 2.43 2.93 0.70 800

SMV1143 11.60 14.2 8.20 4.90 1.50 1.65 2.45 2.95 0.65 600

SMV1144 14.65 17.95 10.4 6.10 1.50 1.65 2.46 2.96 0.65 500

SMV1145 25.50 31.2 18.1 10.6 1.50 1.65 2.50 3.00 0.60 300

SMV1147 54.60 66.7 38.6 22.6 1.50 1.65 2.50 3.00 0.55 150

SMV1148 62.00 76.0 44.1 25.2 1.50 1.65 2.50 3.00 0.50 150

Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated

temperatures may reduce reliability of the device.

Note 2: Reverse voltage, VR (IR = 10 μA): 12 V minimum.

Reverse current, IR (VR = 9.6 V): 20 nA maximum.

Electrical and Mechanical Specifications

The absolute maximum ratings of the SMV114x varactors are

provided in Table 2. Electrical specifications are provided in

Table 3. Typical performance characteristics for the SMV114x

varactors are illustrated in Figures 1 through 4. Table 4

summarizes the capacitance of the SMV114x series for reverse

voltages between 0 and 12 V.

The SPICE model for the SMV114x varactor series is shown in

Figure 5 and the associated model parameters are provided in

Table 5.

Package dimensions, and tape and reel drawings are provided in

Figures 6 through 9.

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMV114x varactors are rated to Moisture Sensitivity Level 1

(MSL1) at 260 C. They can be used for lead or lead-free

soldering. For additional information, refer to the Skyworks

Application Note, Solder Reflow Information, document number

200164

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format. For packaging details, refer to the Skyworks

Application Note Discrete Devices and IC Switch/Attenuators Tape

and Reel Package Orientation, document number 200083.

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200056G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 9, 2009 3

Typical Performance Characteristics

1.0

10.0

100.0

6.0 8.04.0

Reverse Voltage (V)

2.00

Capacitance (pF)

SMV1148

SMV1147

SMV1145

SMV1144

SMV1142

SMV1143

Figure 1. Capacitance vs Reverse Voltage

–3

–2

–1

–40 –20 0 +20 +40 +60 +80

Percentage Change (%)

Temperature (°C)

= 1 V

= 4 V

Figure 3. Relative Capacitance Change vs Temperature

0.4

0.6

0.8

Reverse Voltage (V)

01 2 3 45

RS (Ω)

SMV1142

SMV1144

SMV1145

SMV1147

SMV1148

SMV1143

Figure 2. Series Resistance vs Reverse Voltage

@ 500 MHz

+12

+10

–2

–4

–6

–8

–40 –20 0 +20 +40 +60 +80

Percentage Change (%)

Temperature (°C)

Figure 4. Relative Series Resistance Change vs Temperature

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 September 9, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200132E

Table 4. Capacitance vs Reverse Voltage

(pF)

(V)

SMV1142 SMV1143 SMV1144 SMV1145 SMV1147 SMV1148

0 13.38 18.99 24.01 41.81 89.52 104.71

0.5 10.70 15.18 19.18 33.38 71.44 83.27

1.0 9.10 12.90 16.30 28.35 60.65 70.48

1.5 7.98 11.30 14.28 24.82 53.07 61.48

2.0 7.12 10.08 12.73 22.11 47.27 54.56

2.5 6.42 9.08 11.46 19.91 42.55 48.92

3.0 5.83 8.24 10.40 18.06 38.58 44.13

3.5 5.32 7.51 9.48 16.45 35.12 39.97

4.0 4.86 6.87 8.66 15.02 32.06 36.29

4.5 4.45 6.29 7.93 13.73 29.31 32.99

5.0 4.09 5.76 7.26 12.57 26.81 30.03

5.5 3.75 5.29 6.66 11.53 24.57 27.43

6.0 3.46 4.87 6.13 10.60 22.58 25.22

6.5 3.21 4.51 5.68 9.81 20.89 23.43

7.0 3.00 4.22 5.31 9.17 19.52 22.06

7.5 2.84 3.99 5.02 8.66 18.43 21.01

8.0 2.72 3.82 4.80 8.29 17.63 20.22

8.5 2.63 3.69 4.63 7.99 16.98 19.61

9.0 2.56 3.58 4.50 7.76 16.50 19.12

9.5 2.50 3.50 4.40 7.58 16.10 18.72

10.0 2.45 3.43 4.31 7.43 15.78 18.38

10.5 2.41 3.37 4.24 7.30 15.50 18.11

11.0 2.36 3.31 4.15 7.15 15.18 17.87

11.5 2.35 3.28 4.15 7.10 15.08 17.65

12.0 2.32 3.25 4.08 7.02 14.90 17.43

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200056G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 9, 2009 5

DIODE

Varactor_Diode

AREA = 1

MODEL = Diode_Model

MODE = nonlinear

IND

L = L

RES

R = R

CAP

C = C

PORT

P_anode

port = 1

PORT

P_Cathode

port = 2

DIODEM

Diode_Model

= 1.00e-14

= 0

N = 1

= 0

= C

M = M

= V

= 1.11

= 3

= 0.5

= 0

= 1e-3

= 0

= 2

= 0

= 1

BVL

= 0

BVL

= 1

BV1

= 0

NOM

= 27

= 1

S1672

Figure 5. SPICE Model

Table 5. SPICE Model Parameters

Part Number CJO

(pF)

(V)

M CP

(pF)

(Ω)

SMV1142 13.38 2.20 1.00 0 0.70

SMV1143 18.99 2.20 1.00 0 0.65

SMV1144 24.01 2.20 1.00 0 0.65

SMV1145 41.80 2.50 1.10 0 0.60

SMV1147 89.52 2.50 1.10 0 0.55

SMV1148 104.70 2.25 1.10 0 0.50

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 September 9, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200132E

0.060 (1.50 mm) Min.

0.067 (1.70 mm) Max.

0.010

(0.25 mm) Min.

0.014

(0.35 mm) Max.

0.043 (1.10 mm) Min.

0.051 (1.30 mm) Max.

0.020

(0.50 mm) Min.

0.028

(0.70 mm) Max.

0.003

(0.07 mm) Min.

0.008

(0.20 mm) Max.

10° Max.

0.028

(0.70 mm) Min.

0.035

(0.90 mm) Max.

0.006 (0.15 mm) Min.

Cathode

Indicator

S1652Dimensions are in inches (millimeters shown in parentheses)

Figure 6. SC-79 Package Dimensions

S1673

Notes:

1. Carrier tape: black conductive polycarbonate or polystyrene.

2. Cover tape material: transparent conductive PSA.

3. Cover tape size: 5.4 mm width.

4. All measurements are in millimeters.

8.00 ± 0.20

0.229 ± 0.02 (T)

3.50 ± 0.05

ϕ1.50± 0.10

ϕ0.50± 0.05

4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05

0.80 ± 0.05 (Ko)

1.95 ± 0.05 (Bo)

1.40 ± 0.05

0.39 ± 0.05

0.90 ± 0.05 (Ao)

1.75 ± 0.10

2o Max

Cathode Indicator

Figure 7. SC-79 Tape and Reel Dimensions

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200056G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 9, 2009 7

0.090 (2.30 mm) Min.

0.108 (2.74 mm) Max.

0.045

(1.15 mm) Min.

0.053

(1.35 mm) Max.

0.010

(0.25 mm) Min.

0.016

(0.40 mm) Max.

Cathode

Indicator

0.050

(1.25 mm) Max.

0.006

(0.15 mm) Typ.

0.008

(0.20 mm) Nom.

0.008

(0.20 mm) Nom.

0.008

(0.20 mm) Nom.

0.063 (1.60 mm) Min.

0.071 (1.80 mm) Max.

S1619

Dimensions are in inches (millimeters shown in parentheses)

Figure 8. SOD-323 Package Dimensions

S1674

Notes:

1. Carrier tape: black conductive polycarbonate.

2. Cover tape material: transparent conductive PSA.

3. Cover tape size: 5.4 mm width.

4. Tolerance (.xx) =

± 0.10

4. All measurements are in millimeters.

8.00 +0.30/–0.10

1.45 ± 0.10

0.254 ± 0.13

0.81

1.09

3.50 ± 0.05

ϕ1.50± 0.10

ϕ1.00 ± 0.25

4.00 ± 0.10

Cathode Indicator

4.00 ± 0.10 2.00 ± 0.05

1.78

3.20 ± 0.10

1.35± 0.10 (Ko)

1.75 ± 0.10

Max 5

Max

Figure 9. SOD-323 Tape and Reel Dimensions

DATA SHEET • SMV114x VARACTORS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

8 September 9, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200132E

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions

of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands

and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,

are incorporated by reference.