TL/F/9479
54F/74F139 Dual 1-of-4 Decoder/Demultiplexer
November 1994
54F/74F139
Dual 1-of-4 Decoder/Demultiplexer
General Description
The ’F139 is a high-speed, dual 1-of-4 decoder/demultiplex-
er. The device has two independent decoders, each accept-
ing two inputs and providing four mutually exclusive active
LOW outputs. Each decoder has an active LOW Enable in-
put which can be used as a data input for a 4-output demul-
tiplexer. Each half of the ’F139 can be used as a function
generator providing all four minterms of two variables.
Features
YMultifunction capability
YTwo completely independent 1-of-4 decoders
YActive LOW mutually exclusive outputs
YGuaranteed 4000V minimum ESD protection
Commercial Military Package Package Description
Number
74F139PC N16E 16-Lead (0.300×Wide) Molded Dual-In-Line
54F139DM (Note 2) J16A 16-Lead Ceramic Dual-In-Line
74F139SC (Note 1) M16A 16-Lead (0.150×Wide) Molded Small Outline, JEDEC
74F139SJ (Note 1) M16D 16-Lead (0.300×Wide) Molded Small Outline, EIAJ
54F139FM (Note 2) W16A 16-Lead Cerpack
54F139LM (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C
Note 1: Devices also available in 13×reel. Use suffix eSCX and SJX.
Note 2: Military grade device with environmental and burn-in processing. Use suffix eDMQB, FMQB and LMQB.
Logic Symbols Connection Diagrams
TL/F/94793
IEEE/IEC
TL/F/94797
TL/F/94794
Pin Assignment
DIP, SOIC and Flatpak
TL/F/94791
Pin Assignment
for LCC
TL/F/94792
TRI-STATEÉis a registered trademark of National Semiconductor Corporation.
C1995 National Semiconductor Corporation RRD-B30M75/Printed in U. S. A.
Unit Loading/Fan Out
54F/74F
Pin Names Description U.L. Input IIH/IIL
HIGH/LOW Output IOH/IOL
A0,A
1Address Inputs 1.0/1.0 20 mA/b0.6 mA
EEnable Inputs (Active LOW) 1.0/1.0 20 mA/b0.6 mA
O0–O3Outputs (Active LOW) 50/33.3 b1 mA/20 mA
Functional Description
The ’F139 is a high-speed dual 1-of-4 decoder/demultiplex-
er. The device has two independent decoders, each of
which accepts two binary weighted inputs (A0–A1) and pro-
vides four mutually exclusive active LOW Outputs (O0–O3).
Each decoder has an active LOW enable (E). When E is
HIGH all outputs are forced HIGH. The enable can be used
as the data input for a 4-output demultiplexer application.
Each half of the ’F139 generates all four minterms of two
variables. These four minterms are useful in some applica-
tions, replacing multiple gate functions as shown in
Figure 1
,
and thereby reducing the number of packages required in a
logic network.
Truth Table
Inputs Outputs
E A0A1O0O1O2O3
HX X H H H H
LL L L H H H
LH L H L H H
LL H H H L H
LH H H H H L
H
e
HIGH Voltage Level
LeLOW Voltage Level
XeImmaterial
TL/F/94796
FIGURE 1. Gate Functions (each half)
Logic Diagram
TL/F/94795
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
2
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Storage Temperature b65§Ctoa
150§C
Ambient Temperature under Bias b55§Ctoa
125§C
Junction Temperature under Bias b55§Ctoa
175§C
Plastic b55§Ctoa
150§C
VCC Pin Potential to
Ground Pin b0.5V to a7.0V
Input Voltage (Note 2) b0.5V to a7.0V
Input Current (Note 2) b30 mA to a5.0 mA
Voltage Applied to Output
in HIGH State (with VCC e0V)
Standard Output b0.5V to VCC
TRI-STATEÉOutput b0.5V to a5.5V
Current Applied to Output
in LOW State (Max) twice the rated IOL (mA)
ESD Last Passing Voltage (Min) 4000V
Note 1: Absolute maximum ratings are values beyond which the device may
be damaged or have its useful life impaired. Functional operation under
these conditions is not implied.
Note 2: Either voltage limit or current limit is sufficient to protect inputs.
Recommended Operating
Conditions
Free Air Ambient Temperature
Military b55§Ctoa
125§C
Commercial 0§Ctoa
70§C
Supply Voltage
Military a4.5V to a5.5V
Commercial a4.5V to a5.5V
DC Electrical Characteristics
Symbol Parameter 54F/74F Units VCC Conditions
Min Typ Max
VIH Input HIGH Voltage 2.0 V Recognized as a HIGH Signal
VIL Input LOW Voltage 0.8 V Recognized as a LOW Signal
VCD Input Clamp Diode Voltage b1.2 V Min IIN eb
18 mA
VOH Output HIGH 54F 10% VCC 2.5 IOH eb
1mA
Voltage 74F 10% VCC 2.5 V Min IOH eb
1mA
74F 5% VCC 2.7 IOH eb
1mA
V
OL Output LOW 54F 10% VCC 0.5 V Min IOL e20 mA
Voltage 74F 10% VCC 0.5 IOL e20 mA
IIH Input HIGH 54F 20.0
mA Max VIN e2.7V
Current 74F 5.0
IBVI Input HIGH Current 54F 100
mA Max VIN e7.0V
Breakdown Test 74F 7.0
ICEX Output HIGH 54F 250
mA Max VOUT eVCC
Leakage Current 74F 50
VID Input Leakage 74F 4.75 V 0.0 IID e1.9 mA
Test All Other Pins Grounded
IOD Output Leakage 74F 3.75 mA 0.0 VIOD e150 mV
Circuit Current All Other Pins Grounded
IIL Input LOW Current b0.6 mA Max VIN e0.5V
IOS Output Short-Circuit Current b60 b150 mA Max VOUT e0V
ICC Power Supply Current 13 20 mA Max
3
AC Electrical Characteristics
74F 54F 74F
TAea
25§CTA,V
CC eMil TA,V
CC eCom
Symbol Parameter VCC ea
5.0V CLe50 pF CLe50 pF Units
CLe50 pF
Min Typ Max Min Max Min Max
tPLH Propagation Delay 3.5 5.3 7.5 2.5 12.0 3.0 8.5 ns
tPHL A0or A1to On4.0 6.1 8.0 3.5 9.5 4.0 9.0
tPLH Propagation Delay 3.5 5.4 7.0 3.0 9.0 3.5 8.0 ns
tPHL E1to On3.0 4.7 6.5 2.5 8.0 3.0 7.5
Ordering Information
74F 139 S C X
Temperature Range Family Special Variations
74F eCommercial QB eMilitary grade device with
54F eMilitary environmental and burn-in
processing
Device Type XeDevices shipped in 13×reel
Package Code Temperature Range
PePlastic DIP CeCommercial (0§Ctoa
70§C)
DeCeramic DIP MeMilitary (b55§Ctoa
125§C)
FeFlatpak
LeLeadless Chip Carrier (LCC)
SeSmall Outline SOIC JEDEC
SJ eSmall Outline SOIC EIAJ
4
Physical Dimensions inches (millimeters)
20-Lead Ceramic Leadless Chip Carrier (L)
NS Package Number E20A
16-Lead Ceramic Dual In-Line Package (D)
NS Package Number J16A
5
Physical Dimensions inches (millimeters) (Continued)
16-Lead (0.150×Wide) Molded Small Outline Integrated Circuit (S)
NS Package Number M16A
6
Physical Dimensions inches (millimeters) (Continued)
16-Lead (0.300×Wide) Molded Small Outline Package, EIAJ (SJ)
NS Package Number M16D
16-Lead (0.300×Wide) Molded Dual In-Line Package (P)
NS Package Number N16E
7
54F/74F139 Dual 1-of-4 Decoder/Demultiplexer
Physical Dimensions inches (millimeters) (Continued)
16-Lead Ceramic Flatpak (F)
NS Package Number W16A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor National Semiconductores National Semiconductor
Corporation GmbH Japan Ltd. Hong Kong Ltd. Do Brazil Ltda. (Australia) Pty, Ltd.
2900 Semiconductor Drive Livry-Gargan-Str. 10 Sumitomo Chemical 13th Floor, Straight Block, Rue Deputado Lacorda Franco Building 16
P.O. Box 58090 D-82256 F4urstenfeldbruck Engineering Center Ocean Centre, 5 Canton Rd. 120-3A Business Park Drive
Santa Clara, CA 95052-8090 Germany Bldg. 7F Tsimshatsui, Kowloon Sao Paulo-SP Monash Business Park
Tel: 1(800) 272-9959 Tel: (81-41) 35-0 1-7-1, Nakase, Mihama-Ku Hong Kong Brazil 05418-000 Nottinghill, Melbourne
TWX: (910) 339-9240 Telex: 527649 Chiba-City, Tel: (852) 2737-1600 Tel: (55-11) 212-5066 Victoria 3168 Australia
Fax: (81-41) 35-1 Ciba Prefecture 261 Fax: (852) 2736-9960 Telex: 391-1131931 NSBR BR Tel: (3) 558-9999
Tel: (043) 299-2300 Fax: (55-11) 212-1181 Fax: (3) 558-9998
Fax: (043) 299-2500
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.