069177701702002 - AVX - Datasheet.Live

Discrete Wire IDC

Series 9177

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed

to meet the harsh automotive and industrial market applications for connecting individual

wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact

system has been tested to automotive levels of shock, vibration, and temperature cycling to

prove their reliability and robustness. The simplicity of inserting a wire into the connector with

a small tool allows a wide range of devices to be connected to the PCB without soldering. In

SSL applications specifically, these connectors are used to bring power and signal onto the

PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact

provides a gas-tight connection to conductor of the wire, the housing has been designed to

grab the insulation of the wire to provide a positive strain relief even in the harshest conditions.

In case of repair, the wires can be removed and replace up to three times.

The 9177 series accepts 14 AWG to 20 AWG wires with an insulation diameter ranging from

2.75mm to 4.25mm. These dual contact connectors support a 15 amp current rating with

two large SMT solder tails per wire to provide maximum stability on the PCB. Available in 1p-

3p configuration, these connectors can be end stackable for higher pin counts.

ELECTRICAL

• Current Rating: 15 Amp / Contact

• Voltage Rating: 600 VAC

9177

Series

Prefix

00X

Number of Ways

Plating

Option

06 = Pure Tin

all over

HOW TO ORDER

00X

Wire Gauge Size

ENVIRONMENTAL

• Operating Temperature:

-40ºC to +125ºC

MECHANICAL

• Insulator Material: Nylon 46: UL94V0

• Contact Material: Phosphor Bronze

• Plating: Tin over Nickel

• Durability: 3 Cycles

FEATURES AND BENEFITS

• IDC contact provides a gas-tight connection to the PCB for long term reliability

• Connector housing captures the wire insulation for positive strain relief

• Tested to automotive levels on shock, vibration and temperature cycling for

reliability

• Low and high volume assembly tools to match production volumes

• Reduced total applied cost versus solder or crimp processes

• High temperature insulator capable to 260ºC reflow soldering processes

APPLICATIONS

• Connecting discrete wire components

directly to the PCB

• Bringing power and signals onto a PCB

• Daisy chaining PCB’s together to create

a continuous string of boards

• Application Notes: refer to 201-01-124

Code No of Details

Ways

001 1 Page 30

002 2 Page 31

003 3 Page 32

Code Accepted Wire

Wire Gauge Insulation

001 14 AWG

Solid or Stranded

Ø 4.25

012 16 AWG

Solid or Stranded

Ø 3.50

022 18 AWG

Solid or Stranded

Ø 3.50

033 20 AWG

Solid or Stranded

Ø 2.75

Certification: UL File # E320991, check UL

conditions of use for specific ratings and details

Color/Approval

Code Color Approval

0 Black Special Order

1 White Standard

9 White UL Approved

9177

Series

Prefix

60 = Cap

00X

Number of Ways

HOW TO ORDER – CAP OPTIONS – THROUGH WIRE

X00

Insulator Color

Code Color

000 Black

100 White

Code No of

Ways

001 1

002 2

003 3

00X

Wire Gauge Size

Code Wire Insulator AB

Diameter (Note 3)

027 2.10mm - 2.75mm Ø2.75 2.00

035 2.75mm - 3.50mm Ø3.50 2.65

042 3.50mm - 4.25mm Ø4.25 3.40

9177

Series

Prefix

60 = Cap

00X

Number of Ways

HOW TO ORDER – CAP OPTIONS – WIRE STOP

X99

Insulator Color

Code Color

099 Black

199 White

Code No of

Ways

001 1

002 2

003 3

00X

Wire Gauge Size

Code Wire Insulator AB

Diameter (Note 3)

027 2.10mm - 2.75mm Ø2.75 2.00

035 2.75mm - 3.50mm Ø3.50 2.65

042 3.50mm - 4.25mm Ø4.25 3.40

Discrete Wire IDC

Series 9177

CONNECTOR/TOOLING PART NUMBER MATRIX

SERIES 9177 IDC HAND INSERTION TOOLING* ACCESSORY CAPS

AWG Wire Positions Color Part Number Plastic Metal Through Wire Wire Stop

Insulation (low volume) (high volume)

14 Ø 4.25 1p White 009177001001106 069177701601001 069177701701001 609177001042100 609177001042199

14 Ø 4.25 1p Black 009177001001006 069177701601001 069177701701001 609177001042000 609177001042099

14 Ø 4.25 2p White 009177002001106 069177701601002 069177701701002 609177002042100 609177002042199

14 Ø 4.25 2p Black 009177002001006 069177701601002 069177701701002 609177002042000 609177002042099

14 Ø 4.25 3p White 009177003001106 069177701601003 069177701701003 609177003042100 609177003042199

14 Ø 4.25 3p Black 009177003001006 069177701601003 069177701701003 609177003042000 609177003042099

16 Ø 3.50 1p White 009177001012106 069177701602001 069177701702001 609177001035100 609177001035199

16 Ø 3.50 1p Black 009177001012006 069177701602001 069177701702001 609177001035000 609177001035099

16 Ø 3.50 2p White 009177002012106 069177701602002 069177701702002 609177002035100 609177002035199

16 Ø 3.50 2p Black 009177002012006 069177701602002 069177701702002 609177002035000 609177002035099

16 Ø 3.50 3p White 009177003012106 069177701602003 069177701702003 609177003035100 609177003035199

16 Ø 3.50 3p Black 009177003012006 069177701602003 069177701702003 609177003035000 609177003035099

18 Ø 3.50 1p White 009177001022106 069177701602001 069177701702001 609177001035100 609177001035199

18 Ø 3.50 1p Black 009177001022006 069177701602001 069177701702001 609177001035000 609177001035099

18 Ø 3.50 2p White 009177002022106 069177701602002 069177701702002 609177002035100 609177002035199

18 Ø 3.50 2p Black 009177002022006 069177701602002 069177701702002 609177002035000 609177002035099

18 Ø 3.50 3p White 009177003022106 069177701602003 069177701702003 609177003035100 609177003035199

18 Ø 3.50 3p Black 009177003022006 069177701602003 069177701702003 609177003035000 609177003035099

20 Ø 2.75 1p White 009177001033106 069177701603001 069177701703001 609177001027100 609177001027199

20 Ø 2.75 1p Black 009177001033006 069177701603001 069177701703001 609177001027000 609177001027099

20 Ø 2.75 2p White 009177002033106 069177701603002 069177701703002 609177002027100 609177002027199

20 Ø 2.75 2p Black 009177002033006 069177701603002 069177701703002 609177002027000 609177002027099

20 Ø 2.75 3p White 009177003033106 069177701603003 069177701703003 609177003027100 609177003027199

20 Ø 2.75 3p Black 009177003033006 069177701603003 069177701703003 609177003027000 609177003027099

* Insertion Tooling - Requires Hand Press with Flat Rock Plates; Consult Application Notes 201-01-124

Discrete Wire IDC

Series 9177

14-20 AWG 1 WAY IDC CONNECTOR

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHOR BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 28.

3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14 AND 20 GAUGE

STRANDED WIRE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-109.

6. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO PAGE 33.

PACKING DETAILS

REEL QTY 400

LEADER 500MM

TRAILER 400MM

REEL/BOX 4

PACK QTY 1600

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 14 Gauge Stranded 1.10 Ø 4.25 max 4.25

012 16 Gauge Stranded 0.82 Ø 3.50 max 3.50

022 18 Gauge Stranded 0.72 Ø 3.50 max 3.50

033 20 Gauge Stranded 0.60 Ø 2.75 max 2.75

Discrete Wire IDC

Series 9177

14-20 AWG 2 WAY IDC CONNECTOR

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHOR BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 28.

3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14 AND 20 GAUGE

STRANDED WIRE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-109.

6. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO PAGE 33.

PACKING DETAILS

REEL QTY 400

LEADER 500MM

TRAILER 400MM

REEL/BOX 4

PACK QTY 1600

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 14 Gauge Stranded 1.10 Ø 4.25 max 4.25

012 16 Gauge Stranded 0.82 Ø 3.50 max 3.50

022 18 Gauge Stranded 0.72 Ø 3.50 max 3.50

033 20 Gauge Stranded 0.60 Ø 2.75 max 2.75

Discrete Wire IDC

Series 9177

14-20 AWG 3 WAY IDC CONNECTOR

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHOR BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 28.

3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14 AND 20 GAUGE

STRANDED WIRE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-109.

6. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO PAGE 33.

PACKING DETAILS

REEL QTY 400

LEADER 500MM

TRAILER 400MM

REEL/BOX 4

PACK QTY 1600

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 14 Gauge Stranded 1.10 Ø 4.25 max 4.25

012 16 Gauge Stranded 0.82 Ø 3.50 max 3.50

022 18 Gauge Stranded 0.72 Ø 3.50 max 3.50

033 20 Gauge Stranded 0.60 Ø 2.75 max 2.75

Discrete Wire IDC

Series 9177

ACCESSORY CAP – THROUGH WIRE

NOTES:

1. CAP FOR 9177 IDC WIRE TO BOARD CONNECTOR.

2. THROUGH WIRE CAP CAN BE USED AT ANY POSITION ALONG WIRE.

3. REFERS TO CAP, FOR WIRE MATCH TO CONNECTOR REFER TO TABLE ON PAGE

28.

4. MATERIAL: GLASS FILLED NYLON 46. FOR COLOR REFER TO PAGE 28.

5. CAPS DESIGNED TO ACCOMMODATE INSULATION DIAMETERS REFER TO PAGE 28.

6. GENERAL TOLERANCE ±0.20MM.

7. PACKED IN BAGS, 400 PIECES PER BAG.

8. APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-124.

Discrete Wire IDC

Series 9177

ACCESSORY CAP – WIRE STOP

NOTES:

1. CAP FOR 9177 IDC WIRE TO BOARD CONNECTOR.

2. THROUGH WIRE CAP CAN BE USED AT ANY POSITION ALONG WIRE.

3. REFERS TO CAP, FOR WIRE MATCH TO CONNECTOR REFER TO TABLE ON PAGE 28.

4. MATERIAL: GLASS FILLED NYLON 46. FOR COLOR REFER TO PAGE 28.

5. CAPS DESIGNED TO ACCOMMODATE INSULATION DIAMETERS REFER TO PAGE 28.

6. GENERAL TOLERANCE ±0.20MM.

7. PACKED IN BAGS, 400 PIECES PER BAG.

8. APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-124.

Discrete Wire IDC

Series 9177

NOTES:

1. ALL DIMENSIONS FOR REFERENCE DIMENSIONS.

2. MAXIMUM COMPONENT HEIGHT 0.80MM IN THIS AREA.

3. MAXIMUM COMPONENT HEIGHT 11.00 MM IN THIS AREA.

4. THE SAME RESTRICTIONS APPLY TO ALL WIRE

INSULATION DIAMETERS.

INSERTION TOOLING – REQUIRES HAND PRESS WITH FLAT ROCK PLATES

HIGH PRODUCTION

Metal

No. Max Tool

of Ways Insulation Dia Part Number

(AWG)

4.25 (14) 06 9177 7017 01 001

1 3.50 (16-18) 06 9177 7017 02 001

2.75 (20) 06 9177 7017 03 001

4.25 (14) 06 9177 7017 01 002

2 3.50 (16-18) 06 9177 7017 02 002

2.75 (20) 06 9177 7017 03 002

4.25 (14) 06 9177 7017 01 003

3 3.50 (16-18) 06 9177 7017 02 003

2.75 (20) 06 9177 7017 03 003

MEDIUM PRODUCTION

Plastic

No. Max Tool

of Ways Insulation Dia Part Number

(AWG)

4.25 (14) 06 9177 7016 01 001

1 3.50 (16-18) 06 9177 7016 02 001

2.75 (20) 06 9177 7016 03 001

4.25 (14) 06 9177 7016 01 002

2 3.50 (16-18) 06 9177 7016 02 002

2.75 (20) 06 9177 7016 03 002

4.25 (14) 06 9177 7016 01 003

3 3.50 (16-18) 06 9177 7016 02 003

2.75 (20) 06 9177 7016 03 003

1 WAY 2 WAY 3 WAY

INSERTION TOOLING – PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING

1 WAY

2 WAY

3 WAY

The assembly tooling restricts the available

space/component heights on the PCB.

For details see below.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

AVX:

009177002033006 009177002001006 009177001001006 009177003033006 009177001033006

009177002012006 009177001012006 009177002022006 009177003001006 009177003022006 009177003012006

009177001022006 009177002022106 009177002012106 009177001022106 009177002033106

609177003042100 609177001042100 609177002042100 609177002027100 609177001042199 009177001033106

009177003012106 609177002027199 609177002035099 609177001027199 609177002035100

609177003027199 009177002001106 609177003042199 009177003001106 609177002042199 609177003035100

009177001001106 009177003033106 609177001035100 609177003035199 009177003022106

609177003027100 009177001012106 609177001027100 609177001035199 609177002035199 069177701701002

069177701702002 069177701702001