ZMM5231B - VISHAY - Datasheet.Live

TZM5221 to TZM5267

www.vishay.com Vishay Semiconductors

Rev. 2.0, 12-Mar-2019 1Document Number: 85609

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Small Signal Zener Diodes

DESIGN SUPPORT TOOLS AVAILABLE

FEATURES

• Very sharp reverse characteristic

• Very high stability

• Electrical data identical with the devices

1N5221B to 1N5267B

• Low reverse current level

• Standard Zener voltage tolerance ± 5 % with a

“B” suffix in the ordering code (e.g.: TZM5221B),

suffix “C” is ± 2 % tolerance

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Voltage stabilization

PRIMARY CHARACTERISTICS

PARAMETER VALUE UNIT

VZ range nom. 2.4 to 75 V

Test current IZT 1.7 to 20 mA

VZ specification Thermal equilibrium

Circuit configuration Single

3D Models

ORDERING INFORMATION

DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY

TZM5221B to TZM5267B TZM5221B to TZM5267B-series-GS18

10 000 (8 mm tape on 13" reel) 10 000/box

TZM5221C to TZM5267C TZM5221C to TZM5267C-series-GS18

TZM5221B to TZM5267B TZM5221B to TZM5267B-series-GS08

2500 (8 mm tape on 7" reel) 12 500/box

TZM5221C to TZM5267C TZM5221C to TZM5267C-series-GS08

PACKAGE

PACKAGE NAME WEIGHT MOLDING COMPOUND

FLAMMABILITY RATING

MOISTURE SENSITIVITY

LEVEL SOLDERING CONDITIONS

MiniMELF (SOD-80) 31 mg UL 94 V-0 MSL level 1

(according J-STD-020) Peak temperature max. 260 °C

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Power dissipation RthJA = < 300 K/W Ptot 500 mW

Zener current IZPtot/VZmA

Junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W

Junction temperature Tj175 °C

Storage temperature range Tstg -65 to +175 °C

Forward voltage (max.) IF = 200 mA VF1.1 V

TZM5221 to TZM5267

www.vishay.com Vishay Semiconductors

Rev. 2.0, 12-Mar-2019 2Document Number: 85609

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Based on DC measurement at thermal equilibrium; case temperature maintained at 30 °C ± 2 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PART NUMBER

ZENER VOLTAGE

RANGE (1) TEST CURRENT

REVERSE

LEAKAGE

CURRENT

DYNAMIC RESISTANCE TEMPERATURE

COEFFICIENT

VZ at IZT1 IZT1 IZT2 IR at VR

ZZ at IZT1 ZZK at IZT2 TKVZ

f = 1 kHz

VmA μA V%/K

NOM. TYP. TYP.

TZM5221 2.4 20 0.25 < 100 1 < 30 < 1200 < -0.085

TZM5222 2.5 20 0.25 < 100 1 < 30 < 1250 < -0.085

TZM5223 2.7 20 0.25 < 75 1 < 30 < 1300 < -0.080

TZM5224 2.8 20 0.25 < 75 1 < 30 < 1400 < -0.080

TZM5225 3 20 0.25 < 50 1 < 29 < 1600 < -0.075

TZM5226 3.3 20 0.25 < 25 1 < 28 < 1600 < -0.070

TZM5227 3.6 20 0.25 < 15 1 < 24 < 1700 < -0.065

TZM5228 3.9 20 0.25 < 10 1 < 23 < 1900 < -0.060

TZM5229 4.3 20 0.25 < 5 1 < 22 < 2000 < ± 0.055

TZM5230 4.7 20 0.25 < 5 2 < 19 < 1900 < ± 0.030

TZM5231 5.1 20 0.25 < 5 2 < 17 < 1600 < ± 0.030

TZM5232 5.6 20 0.25 < 5 3 < 11 < 1600 < +0.038

TZM5233 6 20 0.25 < 5 3.5 < 7 < 1600 < +0.038

TZM5234 6.2 20 0.25 < 5 4 < 7 < 1000 < +0.045

TZM5235 6.8 20 0.25 < 3 5 < 5 < 750 < +0.050

TZM5236 7.5 20 0.25 < 3 6 < 6 < 500 < +0.058

TZM5237 8.2 20 0.25 < 3 6.5 < 8 < 500 < +0.062

TZM5238 8.7 20 0.25 < 3 6.5 < 8 < 600 < +0.065

TZM5239 9.1 20 0.25 < 3 7 < 10 < 600 < +0.068

TZM5240 10 20 0.25 < 3 8 < 17 < 600 < +0.075

TZM5241 11 20 0.25 < 2 8.4 < 22 < 600 < +0.076

TZM5242 12 20 0.25 < 1 9.1 < 30 < 600 < +0.077

TZM5243 13 9.5 0.25 < 0.5 9.9 < 13 < 600 < +0.079

TZM5244 14 9 0.25 < 0.1 10 < 15 < 600 < +0.082

TZM5245 15 8.5 0.25 < 0.1 11 < 16 < 600 < +0.082

TZM5246 16 7.8 0.25 < 0.1 12 < 17 < 600 < +0.083

TZM5247 17 7.4 0.25 < 0.1 13 < 19 < 600 < +0.084

TZM5248 18 7 0.25 < 0.1 14 < 21 < 600 < +0.085

TZM5249 19 6.6 0.25 < 0.1 14 < 23 < 600 < +0.086

TZM5250 20 6.2 0.25 < 0.1 15 < 25 < 600 < +0.086

TZM5251 22 5.6 0.25 < 0.1 17 < 29 < 600 < +0.087

TZM5252 24 5.2 0.25 < 0.1 18 < 33 < 600 < +0.088

TZM5253 25 5 0.25 < 0.1 19 < 35 < 600 < +0.089

TZM5254 27 4.6 0.25 < 0.1 21 < 41 < 600 < +0.090

TZM5255 28 4.5 0.25 < 0.1 21 < 44 < 600 < +0.091

TZM5256 30 4.2 0.25 < 0.1 23 < 49 < 600 < +0.091

TZM5257 33 3.8 0.25 < 0.1 25 < 58 < 700 < +0.092

TZM5258 36 3.4 0.25 < 0.1 27 < 70 < 700 < +0.093

TZM5259 39 3.2 0.25 < 0.1 30 < 80 < 800 < +0.094

TZM5260 43 3 0.25 < 0.1 33 < 93 < 900 < +0.095

TZM5261 47 2.7 0.25 < 0.1 36 105 < 1000 < +0.095

TZM5262 51 2.5 0.25 < 0.1 39 125 < 1100 < +0.096

TZM5263 56 2.2 0.25 < 0.1 43 150 < 1300 < +0.096

TZM5264 60 2.1 0.25 < 0.1 46 170 < 1400 < +0.097

TZM5265 62 2 0.25 < 0.1 47 185 < 1400 < +0.097

TZM5266 68 1.8 0.25 < 0.1 52 230 < 1600 < +0.097

TZM5267 75 1.7 0.25 < 0.1 56 270 < 1700 < +0.098

TZM5221 to TZM5267

www.vishay.com Vishay Semiconductors

Rev. 2.0, 12-Mar-2019 3Document Number: 85609

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters (inches): MiniMELF (SOD-80)

Cathode indentification

0.47 (0.019) max.

2.5 (0.098) max. 1.25 (0.49) min.

3.7 (0.146)

3.3 (0.130)

5 (0.197) ref.

2 (0.079) min.

1.6 (0.063)

1.4 (0.055)

Foot print recommendation:

* The gap between plug and glass can

be either on cathode or anode side

Document no.:6.560-5005.01-4

Rev. 8 - Date: 07.June.2006

96 12070

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.