SPECIFICATION
TS-200-112□TS-200-124□TS-200-148□TS-200-212□TS-200-224□TS-200-248□
10A
0.63A
21 ~ 30VDC
87.5%
5A
0.32A
42 ~ 60VDC
88%
10A
0.63A
21 ~ 30VDC
87.5%
5A
0.62A
42 ~ 60VDC
88%
MODEL
MAXIMUM OUTPUT POWER
WAVEFORM Note.1
OUTPUT FREQUENCY
AC REGULATION Note.1
VOLTAGE RANGE (Typ.) Note.3
EFFICIENCY (Typ.) Note.1
DC CURRENT (Typ.)
INPUT
INPUT
BATTERY
OUTPUT
ENVIRONMENT
FUSE
SAFETY &
EMC
BAT. LOW ALARM
BAT. LOW SHUTDOWN
OVER TEMPERATURE
OUTPUT SHORT
BAT. POLARITY
GFCI PROCTECTION
PROTECTION
PROTECTION
True sine wave (THD<3%)
20A
1.25A
10.5 ~ 15VDC
86%
30A*2 30A*1 15A*1
15A*130A*1
±3.0% at rated input voltage
10.5 ~ 15VDC
86%
20A
1.25A
30A*2
85 5℃± ℃
Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power transistor
Protection type : Shut down o/p voltage, re-power on to recover
By internal fuse open
Optional (Only type F) None
-10 ~ +40 @ 100% load, +60 @ 50% load℃℃
Compliance to FCC class A
None
WORKING TEMP.
REMOTE CONTROL
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
SAFETY STANDARDS
-10 ~ +35 @ 100% load ; +60 @ 50% load℃℃
Open : Normal work ; Short : Remote off
20% ~ 90% RH non-condensing
-30 ~ +70 / -22 ~ +158 F, 10 ~ 95% RH℃o
Design refer to
U 458L
None
Compliance to EN61000-4-2,3,8
Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark
True sine wave output (THD<3%)
High surge power up to 400W
High efficiency up to 88%
Fanless design, cooling by free air convention
Built-in remote ON-OFF control
Front panel indicator for operation status
Power ON-OFF switch
Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp.
/ Output short / Input reverse polarity / Overload
Application : Home appliance, power tools, office and portable
equipment, vehicle and yacht ...etc.
3 years warranty
RATED POWER 200W
OVER LOAD (Typ.) 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
Protection type : Shut down o/p voltage, re-power on to recover
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
Bat. I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC
Bat. I/P-AC O/P, AC O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
VIBRATION 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
■ Features :
OTHERS
PACKING 1.63Kg; 6pcs/10.8Kg/1.44CUFT
MTBF
DIMENSION
106.2K hrs min. MIL-HDBK-217F (25 )℃
205*158*59mm (L*W*H)
NOTE 1.Efficiency, AC regulation and THD are tested by 200W, linear load at 13V/26V/52V input voltage.
2.All parameters not specified above are measured at rated load, 25 of ambient temperature and set to factory setting.℃
3.The tolerance of each voltage value by models is:112/212 0.5V;124/224 1V;148/248 2V→± →± →±
230W for 180 sec. / 300W for 10 sec. / surge power 400W for 30 cycles(typ.)
11.3 4%±22.5 4%±45 4%±45 4%±22.5 4%±
10.5 4%±21 4%±42 4%±42 4%±21 4%±
11.3 4%±
10.5 4%±
TS-200 series
File Name:TS-200-SPEC 2015-05-27
50 0.1Hz 50/60Hz selectable by setting button±
60 0.1Hz 50/60Hz selectable by setting button±
FRONT PANEL INDICATOR Operation status ; Green : normal, Orange(flashing) : remote control OFF, Red : abnormal
24V 48V 24V 48V
BAT. VOLTAGE 12V12V
NO LOAD CURRENT DRAW (Typ.)
OFF MODE CURRENT DRAW ≦1mA
BATTERY TYPES Open & sealed Lead Acid
200W True Sine Wave DC-AC Power Inverter
LVD None EN60950-1
80 5℃± ℃ 80 5℃± ℃ 80 5℃± ℃ 80 5℃± ℃85 5℃± ℃
AC VOLTAGE 100 / 110 / 115 / 120VAC selectable by setting button S.W
Factory setting set at 110VAC
200 / 220 / 230 / 240VAC selectable by setting button S.W
Factory setting set at 230VAC
E
13
FUNCTION
EMC IMMUNITY
EMC EMISSION