SURFACE MOUNT DISPLAY APSC03-41SGWW SUPER BIRHGT GREEN Features Description !0.3 The Super Bright Green source color devices are made INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT with Gallium Phosphide Green Light Emitting Diode. CHARACTER APPEARANCE. !I.C. COMPATIBLE. !MECHANICALLY !WHITE RUGGED. FACE,WHITE SEGMENT. !PACKAGE:1100PCS/REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAB0116 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 1 OF 5 Selection Guide P ar t N o . Dic e APSC03-41SGWW Iv (m c d ) @ 10 m A L en s Ty p e SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED D es c r i p t i o n Min . Ty p . 1.9 5.6 Common Cathode, Rt. Hand Decimal Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er peak Peak Wavelength Super Bright Green D Dominate Wavelength 1/2 D ev i c e Ty p . Un its Tes t Co n d it io n s 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA pF VF=0V;f=1MHz 2.5 V IF=20mA 10 uA V R = 5V C Capacitance Super Bright Green 15 VF Forward Voltage Super Bright Green 2.2 IR Reverse Current Super Bright Green Max . Absolute Maximum Ratings at TA=25C P ar am et er Su p er B r ig h t Gr een Un its Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0116 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 2 OF 5 Super Bright Green SPEC NO: DSAB0116 APPROVED : J. Lu APSC03-41SGWW REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 3 OF 5 APSC03-41SGWW SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) SPEC NO: DSAB0116 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 4 OF 5 Tape Specification (Units : mm) SPEC NO: DSAB0116 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 5 OF 5