Technical Data
Advance Tapes International Limited,PO Box 122,
Abbey Meadows,Leicester, LE4 5RA.
Tel:0116 251 0191.Fax: 0116 265 2046. www.advancetapes.com
General description
35 micron copper foil coated with a non-conductive acr ylic adhesive supplied on
a removable silicone release liner.
Non-conductive acrylic adhesive
Good high and low temperature resistance
Can be easily soldered
Easy unwind
Specification
Tested in accordance with ASTM D-1000 latest issue, BS EN 60454 - Part 2
test methods (formerly VDE 0340, BS 3924).
Tested and meets Flame Retardancy requirements of UL 510 (UL guide
OANZ 2,File number E 86214 (M)
Technical Details
Technical details BS value ASTM value
Typical values
Foil thickness: 0.035mm 1.4 mil
Adhesive thickness: 0.030mm 1.2 mil
Total thickness: 0.065mm 2.6 mil
Adhesion to steel: 4.5 N/cm 41 oz/in.
Tensile strength: 40 N/cm 23 lbs/inch
Temperature resistance: -20°C to +155°C Up to +311°F
RoHS compliant Yes
Storage Temperature +12°C to +25°C
AT525 35 Micron Copper Foil
Shielding Tape
Issue 2 / July 2006
AFERA
Association des Fabricants Européens de
Rubans Auto-Adhésifs.
NOTE
Except where indicated otherwise,the figures stated are aver-
age values and should not be regarded as MAXIMUMor MINI-
MUM values for specification purposes.The Company reserves
the right to improve products and any change in specification
will result in a re-issue of the relevant ‘Technical Data Sheet’.
Customers should satisfy themselves that the tape is suitable
for their requirements whether after such modifications or
otherwise. Please check that you have the latest issue of the
‘Technical Data Sheet’.All slitting and length tolerances are to
British Standards.Before use the customer is advised to con-
sult the Health & Safety Data Sheet produced by the company
for this product,which is available on request.
STORAGE
Tapes stored below the minimum recommended temperature
will require warming up to that level before use.Up to 24
hours may be required for this to take place.
