Theproductsinthiscatalogarenotrecommendedfornewdesign R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 1710-1990MHz DEA161990LT-1182A8 Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components Multilayer Low Pass Filter Conformity to RoHS Directive For 1710-1990MHz DEA161990LT-1182A8 SHAPES AND DIMENSIONS [Top view] 1.600.15 0.800.10 (3) (4) [Bottom view] 0.500.10 Marking 0.15min. (1) 0.800.10 (2) Terminal functions 1 IN/(OUT) 2 GND 3 OUT/(IN) 4 GND 0.200.10 0.20min. Dimensions in mm RECOMMENDED LAND PATTERN 0.80 1.40 0.50 0.60 0.50 2.20 Dimensions in mm RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20150601 / rf_lpf_dea161990lt-1182a8_en.fm Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components DEA161990LT-1182A8 ELECTRICAL CHARACTERISTICS Item Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Frequency Range (MHz) Min. Typ. Max. 1710 to 1990 1710 to 1990 1710 to 1990 3420 to 3980 5130 to 5970 5970 to 12500 -- -- 10 30.5 28.5 25 0.41 -- 16.9 -- 32.6 -- 50 (Nominal) 0.50 0.60(-40 to +85C) -- -- -- -- Characteristic Impedance (:) Ta: +255C TEMPERATURE RANGE Operating temperature C -40 to +85 Storage temperature C -40 to +85 * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20150601 / rf_lpf_dea161990lt-1182a8_en.fm Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components DEA161990LT-1182A8 FREQUENCY CHARACTERISTICS INSERTION LOSS ATTENUATION 0 0.0 10 0.5 1.0 Attenuation(dB) Insertion Loss (dB) 20 1.5 30 40 50 2.0 60 2.5 3.0 1500 70 1700 1900 2100 2300 2500 Frequency (MHz) 2700 2900 80 1000 2000 3000 4000 Frequency (MHz) 5000 6000 RETURN LOSS -50 -40 -30 Return Loss(dB) -20 -10 0 10 20 30 40 50 1000 1500 2000 Frequency (MHz) 2500 3000 * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20150601 / rf_lpf_dea161990lt-1182a8_en.fm Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components RECOMMENDED REFLOW PROFILE Preheating Soldering Peak T4 T: Temperature 3C/sec or lower 6C/sec or lower T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 150C T2 200C Time t1 60 to 120sec Soldering Critical zone (T3 to T4) Temp. Time T3 t2 217C 60 to 120sec t3 : Time within 5C of actual peak temperature The maximum number of reflow is 3. * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. Peak Temp. T4 240 to 260C Time t3 30sec max. Theproductsinthiscatalogarenotrecommendedfornewdesign RF Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this catalog. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/ equipment or providing backup circuits, etc., to ensure higher safety. * All specifications are subject to change without notice. * Before using these products, be sure to request the delivery specifications. 20150601 / rf_lpf_dea161990lt-1182a8_en.fm