Product Bulletin 10.66 Gb/s Chirped RZ Pulse Generator The 10.66 Gbit/s Chirped RZ Pulse Generator is designed for applications with chirped return-tozero (RZ) modulation. It is also designed for dispersion-managed soliton data formatting. This product features amplitude and phase modulation functions in a single unit. Key Features * Amplitude and phase modulation functions in a single unit * Capable of generating variable chirped pulse edges * Low power, single frequency sinusoidal drive * Polarization maintaining input and output optical fibers Applications * Chirped return-to-zero (RZ) modulation * Dispersion managed soliton data formatting 10.66 Gb/s Chirped | 2 Typical Pulse Characteristics 30% Duty Factor Package Dimensions (inches [mm]) 10.66 Gb/s Chirped | 3 Typical Frequency Response of the Intensity Modulator Section Typical Frequency Response of the Phase Modulator Section 10.66 Gb/s Chirped | 4 Specifications General Material Crystal orientation Waveguide process Operating temperature Storage temperature LiNbO3 x-cut, y-propagating Ti-indiffused 0C minimum, 70C maximum -40C minimum, 85C maximum Mechanical RF port connector Intensity Modulator Section RF port connector Phase Modulator Section Input fiber Wiltron K Wiltron K Fujikura SM 15-P-8/125-UV/UV-400, Length: 0.9 meter min, no connector Output fiber Fujikura SM 15-P-8/125-UV/UV-400, Length: 0.9 meter min, no connector Cabling Connector caps 900 mm Loose Tube Hytrel tubing Shorting/dust cap on Phase Modulator output Optical Wavelength range Insertion loss, min On/off extinction ratio, at 75 Hz, min Polarization extinction ratio Optical return loss Input optical power (maximum) 1530 to 1565 nm 7.5 dB 20 dB 20 dB -40 dB 50 mW Electrical Intensity Section Vp at 5.33 GHz S11 return loss RF input power, maximum Termination Biasing Vp at DC, max Phase Section Vp at 10.66 GHz S11 at 10.66 GHz RF input power, maximum Termination RF monitoring port attenuation 6.5 V -12 dB +27 dBm Internal Via the RF port or via a separate pin 4.0 V 10.0 V -9 dB +30 dBm Internal 15 dB Model Number 10022801 10.66 Gb/s chirped RZ pulse generator (Note: Connectorization is available. Call JDS Uniphase for information). Contact Information For more information on this or other products and their availability, please contact your local JDS Uniphase sales representative or JDS Uniphase directly at 877 438-8674, or by fax 860 769-3001, or via email at sales@ca.jdsunph.com, or visit our Web site at www.jdsunph.com. JDS Uniphase Corporation 1289 Blue Hills Avenue Bloomfield, CT 06002 USA Tel 860 769-3000 Toll Free 877 438-8674 Fax 860 769-3001 www.jdsunph.com All information contained herein is believed to be accurate and is subject to change without notice. No responsibility is assumed for its use. JDS Uniphase Corporation, its subsidiaries and affiliates, or manufacturer, reserve the right to make changes, without notice, to product design, product components, and product manufacturing methods. Some specific combinations of options may not be available. Please contact JDS Uniphase for more information. (c)JDS Uniphase Corporation. All rights reserved. 11/99 Printed in USA