Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England mailto:sales@isocom.uk.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055 Circuit Features Description Absolute Maximum Ratings Electrical Characteristics Similar Optocouplers Home Page IS610, IS611 Circuit Features 5000V Isolation FET Output Low Cost Dual-in-line Package Description The IS610 and IS611 are optically coupled isolators each consisting of a Gallium Arsenide Infrared Emitting Diode and a symmetrical bilateral silicon photo detector, mounted in a standard 6-pin dual in line package. Surface Mount Option Available. All electrical parameters are 100% tested. Specifications are guaranteed to a cumulative 0.65% AQL. Absolute Maximum Ratings (25C) Storage Temperature: -55C to +150C Operating Temperature: -55C to +100C Lead Soldering: 260C for 10s, 1.6mm from case Input to Output Isolation Voltage: 2500V (IS610) 5000V (IS611) Input Diode Forward DC Current: Peak Forward Current: Reverse DC Voltage: Power Dissipation: Derate Linearly: 60mA 3A (1s pw 300pps) 6V 150mW 2.0mW/C above 25C Output Transistor Breakdown Voltage: Output Current: Power Dissipation: Derate Linearly: 30V 100mA 300mW 4.0mW/C above 25C Individual Electrical Characteristics INPUT PARAMETER CONDITIONS MIN TYP MAX UNIT VF Forward Voltage IF=16mA 1.2 1.75 V IR Reverse Current VR=6.0V 10 VR Reverse Breakdown Voltage IR=10A 6.0 V V(BR)46 Breakdown Voltage I46=10A; IF=0 30 V R46 Off-State Resistance V46=15V, IF=0 300 Mohms I46 Off-State Dark Current C46 Capacitance A OUTPUT COUPLED PARAMETER V46=15V, IF=0, TA=25C 50 nA V46=15V, IF=0, TA=100C 50 A V46=0, IF=0, f=1MHz 15 pF CONDITIONS MIN TYP MAX UNIT On-State Resistance R46 IS610 IS611 200 ohms IF=16mA, I46=100A RIO Isolation Resistance, Input to Output VIO=500V, note 1 CIO Capacitance, Input to Output tON Turn-On Time tOFF Turn-Off Time f=1MHz IF=16mA, RL=50ohm, V46=5V 170 ohms 100 Gohm 2.5 pF 15 s 15 s Isolation Voltage, Input to Output IS610 IS611 Resistance, Non-Linearity and Asymmetry note 1 IF=16mA, I46=25A RMS, f=1KHz 2500 V 5000 V 0.1 % Notes 1. Measured with input leads shorted together and ouput leads shorted together. Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date. Contents