Flex Suppressor(R) Noise Suppression Sheet Overview Applications The KEMET Noise Suppression Sheet Flex Suppressor(R) is effectively designed for high frequency noise that is generated from the electronic devices. The flexible sheet is a polymer base, blended with micron-sized magnetic powders dispersed throughout the material. These sheets are effective for electromagnetic wave and resonance suppression, and can be cut into a variety of shapes and sizes. * Radiation noise suppression for electronic equipment, especially mobile phone, display, digital still camera, digital video camera, notebook PC and tablet, car infortainment * Quasi-microwave range interference prevention inside and in-between electronics, desense in FM radio, digital TV, LTE, GPS, Wi-Fi, Bluetooth and optical transceiver * Electro static discharge (ESD) countermeasure * Enhanced wireless power transfer Benefits * Electromagnetic wave suppression - the electromagnetic wave enters through the sheet and is suppressed by losing its magnetic structure * Resonance suppression - controls the high frequency current and suppresses unwanted electromagnetic resonance by creating impedance * Wide range of frequencies available from MHz band to GHz band * Thin, flexible material used in portable equipment * Virtually no limitation to where it can be used * Less time required for installation * Easily cut into any shape * RoHS compliant and halogen-free * AEC-Q200 (FF1 and EFF4) Sheet Type Roll Type One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 1 Flex Suppressor (R) Noise Suppression Sheet Part Number System EFF4 (01)- 240 X 240 T0800 Series Thickness Standard Dimensions Adhesive Tape Thickness EFA EFF* EFF4 EFG* EFG2 EFS EFH* EFR* EFX* EFX6 FF1 FG1 FX5 (003)- = 0.03 mm* (005)- = 0.05 mm (007)- = 0.07 mm* (01)- = 0.1 mm (02)- = 0.2 mm (03)- = 0.3 mm (05)- = 0.5 mm (10)- = 1.0 mm (25)- = 0.025 mm (50)- = 0.05 mm (75)- = 0.075 mm (100)- = 0.1 mm (200)- = 0.2 mm (300)- = 0.3 mm 80 X 80 = Sheet 80 mm x 80 mm 120 X 120 = Sheet 120 mm x 120 mm 240 X 80 = Sheet 240 mm x 80 mm 240 X 240 = Sheet 240 mm x 240 mm 240 X 20 M = Roll 240 mm x 20 m 240 X 30 M = Roll 240 mm x 30 m 240 X 50 M = Roll 240 mm x 50 m T0800 = 0.03 mm T1500 = 0.14 mm* T2200 = 0.05 mm* T2900 = 0.01 mm Blank = No adhesive tape * Not for new design. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 2 Flex Suppressor (R) Noise Suppression Sheet Specifications - High Permeability Type Features High Permeability Type Series FX5 EFX6 Effective Frequency Up to 10 GHz Operating Temperature (C) -40 to +105 0.1/0.2/0.3 240 X 240 (Roll on request) 240 X 240 150 typical 160 typical Permeability 180 160 140 120 100 Permeability at 3 MHz 80 60 40 20 0 Permeability Standard Dimensions (mm) " 1 180 160 140 120 ' 100 80 60 40 20 0 10 1 ' " 10010 1,000 100 10,000 1,000 10,000 180 160 140 120 100 80 60 40 20 0 Permeability 0.025/0.05/0.075/0.1 Permeability Thickness (mm) " 1 FrequencyFrequency [MHz] [MHz] Specific Gravity1 10010 1,000 100 10,000 1,000 10,000 3.8 typical UL 94 HB UL File No. E176124 RoHS Compliant Halogen Free PVC Free Lead Free Red Phosphorus Free Reflow Temperature (C) " 1.0 X 106 typical Approved Standard Environment ' FrequencyFrequency [MHz] [MHz] 3.3 typical Surface Resistivity (/sq.) 180 160 140 ' 120 100 80 60 40 20 0 10 1 Up to 260C, special double-sided adhesive tape required, available upon request Value in 23C atmosphere. Above specifications are for the Flex Suppressor(R) only (adhesives, etc., not included.) 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 3 Flex Suppressor (R) Noise Suppression Sheet Specifications - GHz Band High Performance Type Features GHz Band High Performance Type Series FG1 EFG2 Effective Frequency 1 to 10 GHz Operating Temperature (C) -40 to +105 0.025/0.05/0.075 0.1/0.2/0.3 Standard Dimensions (mm) 240 X 240 (Roll on request) 240 X 240 25 typical 35 typical 50 50 40 40 40 40' 30 Permeability at 3 MHz 20 10 0 1 30 ' 20 10 " 0 10 1 ' " 10010 1,000 100 10,000 1,000 30 20 10 0 10,000 Permeability 50 Permeability 50 Permeability Permeability Thickness (mm) 1 3.1 typical Surface Resistivity (/sq.) 10 " 0 10 1 " 10010 1,000 100 10,000 1,000 10,000 3.9 typical UL 94 HB UL File No. E176124 RoHS Compliant Halogen Free PVC Free Lead Free Red Phosphorus Free Reflow Temperature (C) 20 1.0 X 106 typical Approved Standard Environment 30 FrequencyFrequency [MHz] [MHz] FrequencyFrequency [MHz] [MHz] Specific Gravity1 ' Up to 260C, special double-sided adhesive tape required, available upon request Value in 23C atmosphere. Above specifications are for the Flex Suppressor(R) only (adhesives, etc., not included.) 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 4 Flex Suppressor (R) Noise Suppression Sheet Specifications - Super High Frequency & UL 94 V-0 Flame Retardant Type Features Super High Frequency Type UL 94 V-0 Flame Retardant Type Series EFS EFA 1 GHz to 40 GHz Up to 10 GHz Effective Frequency Operating Temperature (C) Thickness (mm) -40 to +105 0.1/0.2/0.3/0.5/1.0 0.05/0.1/0.2/0.3 240 X 240 240 X 240 (Roll on request) Standard Dimensions (mm) 60 typical Permeability 10 typical Permeability at 3 MHz 100 90 80 70 60 50 40 30 20 10 0 ' " 1 10 100 1,000 10,000 Frequency [MHz] Specific Gravity1 Surface Resistivity (/sq.) 4.5 typical 3.1 typical 1.0 X 108 typical 1.0 X 106 typical UL 94 V-0 UL File No. E176124 Approved Standard RoHS Environment Compliant Halogen Free PVC Free Lead Free Red Phosphorus Free Reflow Temperature (C) Up to 260C, special double-sided adhesive tape required, available upon request Value in 23C atmosphere. Above specifications are for the Flex Suppressor(R) only (adhesives, etc., not included.) 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 5 Flex Suppressor (R) Noise Suppression Sheet Specifications - UL 94 V-0 Flame Retardant Type cont. Features UL 94 V-0 Flame Retardant Type Series FF1 EFF4 Effective Frequency Up to 10 GHz Operating Temperature (C) Thickness (mm) Standard Dimensions (mm) -40 to +125 -40 to +125 0.05/0.1/0.2/0.3 0.1/0.2/0.3/0.5 240 X 240 (Roll on request) 240 X 240 140 typical 160 140 120 Permeability at 3 MHz " 1 10 100 1,000 100 ' 80 60 40 " 20 0 10,000 Permeability ' Permeability Permeability 100 typical 100 90 80 70 60 50 40 30 20 10 0 1 Frequency [MHz] 10 100 10,000 100 80 60 40 20 0 " 1 3.1 typical Surface Resistivity (/sq.) 100 1,000 10,000 3.7 typical 1.0 X 10 typical 6 UL 94 V-0 UL File No. E176124 Approved Standard RoHS Compliant Halogen Free PVC Free Lead Free - Red Phosphorus Reflow Temperature (C) 10 Frequency [MHz] Frequency [MHz] Specific Gravity1 Environment 1,000 ' 120 Up to 260C, special double-sided adhesive tape required, available upon request Value in 23C atmosphere. Above specifications are for the Flex Suppressor(R) only (adhesives, etc., not included.) 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 6 Flex Suppressor (R) Noise Suppression Sheet Specifications - Not for New Design Features Standard Specifications High Magnetic Permeability Type Series EFR EFX Extra High Magnetic Permeability Type High Frequency High Temperature Reflow EFF EFG EFH 0.05/0.1/0.2/0.3 0.05/0.1 Effective Frequency Up to 10 GHz Operating Temperature (C) -40 to +105 Thickness (mm) 0.05/0.1/0.2/0.3/0.5/1.0 0.05/0.1/0.2/0.3/0.5 0.07/0.1/0.2/0.3 Standard Dimensions (mm) Specific Gravity 1 Tensile Strength (Mpa) Surface Resistivity (/sq.) Thermal Conductivity (W/m K) Approved Standard 240 x 240 2.8 typical 3.2 typical 3.6 typical 3.0 typical 3.1 typical 3.6 minimum 6.8 minimum 6.9 minimum 3.5 minimum 6.8 minimum 7 1.0 x 10 typical 6 1.0 x 10 typical 6 1.0 x 10 typical 6 1.0 x 10 typical 1.0 x 107 typical 0.22 0.22 0.4 0.22 1.3 UL 94 V-0 UL 94 HB UL 94 V-0 UL 94 V-1 UL 94 V-0 UL File No. E176124 RoHS Environment Compliant Halogen Free PVC Free Lead Free Red Phosphorus Relative Magnetic Permeability (at 3MHz) Remarks - Free - - Free 60 typical 100 typical 130 typical 20 typical 60 typical 60 high permeability, various thickness flame retardant (UL 94 V-0 certified) Industry's highest magnetic permeability Excellent suppression 100 high permeability, of 130 with halogen of high frequency noise free composition. Flame in Wi-Fi and higher various thickness retardant (UL 94 V-0 bandwidths. certified) Can be mounted before reflowing Value in 23C atmosphere. Above specifications are for the Flex Suppressor(R) only (adhesives, etc., not included.) 1 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 7 Flex Suppressor (R) Noise Suppression Sheet Table 1A - Ratings & Part Number Reference Tape Thickness Permeability Specific Gravity Surface Resistivity mm mm at 3 MHz Typical /sq. typical g 0.025 0.025 0.025 0.025 0.025 0.025 0.05 0.05 0.05 0.05 0.05 0.05 0.075 0.075 0.075 0.075 0.075 0.075 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.01 0.01 0.01 0.01 -0.01 0.01 0.01 0.01 0.01 -0.01 0.01 0.01 0.01 0.01 -0.01 0.01 0.01 0.01 0.01 -0.01 0.03 0.03 0.03 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 160 160 160 160 160 160 160 160 160 160 160 160 160 160 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.22 2.74 3.66 10.97 990.00 2,285.40 1.75 3.93 5.24 15.73 1,980.00 3,275.40 2.28 5.12 6.83 20.48 2,970.00 4,265.40 2.81 6.32 8.42 25.26 3,960.00 5,255.40 2.53 5.69 7.59 22.77 4.96 11.17 14.89 43.78 44.66 7.39 16.64 22.18 65.67 66.54 mm mm at 3 MHz Typical /sq. typical g Thickness Tape Thickness Permeability Specific Gravity Surface Resistivity Weight Part Number Series Thickness FX5(25)-80X80T2900 FX5(25)-120X120T2900 FX5(25)-240X80T2900 FX5(25)-240X240T2900 FX5(25)-240X50M FX5(25)-240X50MT2900 FX5(50)-80X80T2900 FX5(50)-120X120T2900 FX5(50)-240X80T2900 FX5(50)-240X240T2900 FX5(50)-240X50M FX5(50)-240X50MT2900 FX5(75)-80X80T2900 FX5(75)-120X120T2900 FX5(75)-240X80T2900 FX5(75)-240X240T2900 FX5(75)-240X50M FX5(75)-240X50MT2900 FX5(100)-80X80T2900 FX5(100)-120X120T2900 FX5(100)-240X80T2900 FX5(100)-240X240T2900 FX5(100)-240X50M FX5(100)-240X50MT2900 EFX6(01)-80X80T0800 EFX6(01)-120X120T0800 EFX6(01)-240X80T0800 EFX6(01)-240X240T0800 EFX6(02)-80X80T0800 EFX6(02)-120X120T0800 EFX6(02)-240X80T0800 EFX6(02)-240X240 EFX6(02)-240X240T0800 EFX6(03)-80X80T0800 EFX6(03)-120X120T0800 EFX6(03)-240X80T0800 EFX6(03)-240X240 EFX6(03)-240X240T0800 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 FX5 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 EFX6 Part Number Series (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Weight FS8004_NSS * 10/9/2018 8 Flex Suppressor (R) Noise Suppression Sheet Table 1A - Ratings & Part Number Reference cont. Tape Thickness Permeability Specific Gravity Surface Resistivity mm mm at 3 MHz Typical /sq. typical g 0.025 0.025 0.025 0.025 0.025 0.025 0.05 0.05 0.05 0.05 0.05 0.05 0.075 0.075 0.075 0.075 0.075 0.075 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.05 0.05 0.05 0.05 0.05 0.05 0.01 0.01 0.01 0.01 -0.01 0.01 0.01 0.01 0.01 -0.01 0.01 0.01 0.01 0.01 -0.01 0.03 0.03 0.03 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 0.03 -0.03 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 60 60 60 60 60 60 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.1 3.1 3.1 3.1 3.1 3.1 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.19 2.67 3.56 10.69 930.00 2,225.40 1.68 3.79 5.05 15.15 1,860.00 3,155.40 2.18 4.90 6.54 19.61 2,790.00 4,085.40 2.59 5.82 7.76 23.27 5.08 11.44 15.25 44.93 45.74 7.58 17.05 22.73 67.40 68.20 1.26 2.83 3.77 9.81 1,860.00 2,042.40 mm mm at 3 MHz Typical /sq. typical g Thickness Tape Thickness Permeability Specific Gravity Surface Resistivity Weight Part Number Series Thickness FG1(25)-80X80T2900 FG1(25)-120X120T2900 FG1(25)-240X80T2900 FG1(25)-240X240T2900 FG1(25)-240X50M FG1(25)-240X50MT2900 FG1(50)-80X80T2900 FG1(50)-120X120T2900 FG1(50)-240X80T2900 FG1(50)-240X240T2900 FG1(50)-240X50M FG1(50)-240X50MT2900 FG1(75)-80X80T2900 FG1(75)-120X120T2900 FG1(75)-240X80T2900 FG1(75)-240X240T2900 FG1(75)-240X50M FG1(75)-240X50MT2900 EFG2(01)-80X80T0800 EFG2(01)-120X120T0800 EFG2(01)-240X80T0800 EFG2(01)-240X240T0800 EFG2(02)-80X80T0800 EFG2(02)-120X120T0800 EFG2(02)-240X80T0800 EFG2(02)-240X240 EFG2(02)-240X240T0800 EFG2(03)-80X80T0800 EFG2(03)-120X120T0800 EFG2(03)-240X80T0800 EFG2(03)-240X240 EFG2(03)-240X240T0800 EFA(005)-80X80T0800 EFA(005)-120X120T0800 EFA(005)-240X80T0800 EFA(005)-240X240T0800 EFA(005)-240X50M EFA(005)-240X50MT0800 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 FG1 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFG2 EFA EFA EFA EFA EFA EFA Part Number Series (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Weight FS8004_NSS * 10/9/2018 9 Flex Suppressor (R) Noise Suppression Sheet Table 1A - Ratings & Part Number Reference cont. Part Number Series EFA(01)-80X80T0800 EFA(01)-120X120T0800 EFA(01)-240X80T0800 EFA(01)-240X240T0800 EFA(01)-240X50M EFA(01)-240X50MT0800 EFA(02)-80X80T0800 EFA(02)-120X120T0800 EFA(02)-240X80T0800 EFA(02)-240X240 EFA(02)-240X240T0800 EFA(02)-240X30M EFA(02)-240X30MT0800 EFA(03)-80X80T0800 EFA(03)-120X120T0800 EFA(03)-240X80T0800 EFA(03)-240X240 EFA(03)-240X240T0800 EFA(03)-240X20M EFA(03)-240X20MT0800 FF1(50)-80X80T0800 FF1(50)-120X120T0800 FF1(50)-240X80T0800 FF1(50)-240X240T0800 FF1(50)-240X50M FF1(50)-240X50MT0800 FF1(100)-80X80T0800 FF1(100)-120X120T0800 FF1(100)-240X80T0800 FF1(100)-240X240T0800 FF1(100)-240X50M FF1(100)-240X50MT0800 FF1(200)-80X80T0800 FF1(200)-120X120T0800 FF1(200)-240X80T0800 FF1(200)-240X240 FF1(200)-240X240T0800 FF1(200)-240X30M EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA EFA FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 Part Number Series Tape Thickness Permeability Specific Gravity Surface Resistivity mm mm at 3 MHz Typical /sq. typical g 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.05 0.05 0.05 0.05 0.05 0.05 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 -0.03 0.03 0.03 0.03 -0.03 -0.03 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 -- 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 2.24 5.05 6.73 18.74 3,720.00 3,902.40 4.23 9.53 12.70 35.72 36.59 4,464.00 4,573.44 6.21 13.98 18.63 53.57 54.45 4,464.00 4,536.96 1.09 2.45 3.27 9.81 1,860.00 2,042.40 2.08 4.69 6.25 18.74 3,720.00 3,902.40 4.07 9.15 12.20 35.72 36.59 4,464.00 mm mm at 3 MHz Typical /sq. typical g Thickness Tape Thickness Permeability Specific Gravity Surface Resistivity Weight Thickness (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Weight FS8004_NSS * 10/9/2018 10 Flex Suppressor (R) Noise Suppression Sheet Table 1A - Ratings & Part Number Reference cont. Part Number Series FF1(200)-240X30MT0800 FF1(300)-80X80T0800 FF1(300)-120X120T0800 FF1(300)-240X80T0800 FF1(300)-240X240 FF1(300)-240X240T0800 FF1(300)-240X20M FF1(300)-240X20MT0800 EFF4(01)-80X80T0800 EFF4(01)-120X120T0800 EFF4(01)-240X80T0800 EFF4(01)-240X240T0800 EFF4(02)-80X80T0800 EFF4(02)-120X120T0800 EFF4(02)-240X80T0800 EFF4(02)-240X240 EFF4(02)-240X240T0800 EFF4(03)-80X80T0800 EFF4(03)-120X120T0800 EFF4(03)-240X80T0800 EFF4(03)-240X240 EFF4(03)-240X240T0800 EFF4(05)-80X80T0800 EFF4(05)-120X120T0800 EFF4(05)-240X80T0800 EFF4(05)-240X240 EFF4(05)-240X240T0800 EFS(01)-80X80T0800 EFS(01)-120X120T0800 EFS(01)-240X80T0800 EFS(01)-240X240T0800 EFS(02)-80X80T0800 EFS(02)-120X120T0800 EFS(02)-240X80T0800 EFS(02)-240X240 EFS(02)-240X240T0800 EFS(03)-80X80T0800 EFS(03)-120X120T0800 FF1 FF1 FF1 FF1 FF1 FF1 FF1 FF1 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFF4 EFS EFS EFS EFS EFS EFS EFS EFS EFS EFS EFS Part Number Series Tape Thickness Permeability Specific Gravity Surface Resistivity mm mm at 3 MHz Typical /sq. typical g 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.03 0.03 0.03 0.03 -0.03 -0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 -0.03 0.03 0.03 100 100 100 100 100 100 100 100 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 10 10 10 10 10 10 10 10 10 10 10 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 106 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 4,573.44 6.05 13.61 18.15 53.57 54.45 4,464.00 4,536.96 2.63 5.92 7.89 23.66 5.00 11.24 14.99 42.63 44.97 7.36 16.57 22.09 63.94 66.28 12.10 27.23 36.30 106.56 108.90 3.80 8.50 11.30 34.00 6.60 14.80 19.70 50.10 59.10 9.30 21.00 mm mm at 3 MHz Typical /sq. typical g Thickness Tape Thickness Permeability Specific Gravity Surface Resistivity Weight Thickness (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Weight FS8004_NSS * 10/9/2018 11 Flex Suppressor (R) Noise Suppression Sheet Table 1A - Ratings & Part Number Reference cont. Part Number Series EFS(03)-240X80T0800 EFS(03)-240X240 EFS(03)-240X240T0800 EFS(05)-80X80T0800 EFS(05)-120X120T0800 EFS(05)-240X80T0800 EFS(05)-240X240 EFS(05)-240X240T0800 EFS(10)-80X80T0800 EFS(10)-120X120T0800 EFS(10)-240X80T0800 EFS(10)-240X240 EFS(10)-240X240T0800 EFS EFS EFS EFS EFS EFS EFS EFS EFS EFS EFS EFS EFS Part Number Series Tape Thickness Permeability Specific Gravity Surface Resistivity mm mm at 3 MHz Typical /sq. typical g 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 0.03 -0.03 0.03 0.03 0.03 -0.03 0.03 0.03 0.03 -0.03 10 10 10 10 10 10 10 10 10 10 10 10 10 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 1.0 X 108 28.00 75.10 84.10 14.90 33.50 44.70 125.10 134.20 28.80 64.80 86.40 250.30 259.30 mm mm at 3 MHz Typical /sq. typical g Specific Gravity Surface Resistivity Weight Thickness Thickness Tape Thickness (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Permeability Weight FS8004_NSS * 10/9/2018 12 Flex Suppressor (R) Noise Suppression Sheet Table 1B - Not for New Design Ratings & Part Number Reference Tape Thickness Permeability Specific Gravity Tensile Strength Surface Resistivity Thermal Conductivity mm mm at 3 MHz Typical Mpa Minimum /sq. typical W/mK 0.05 0.03 60 2.8 3.6 1.0 X 107 0.22 0.1 0.03 60 2.8 3.6 1.0 X 107 0.22 7 0.22 Part Number Series Thickness EFR(005)-240x240T0800 EFR EFR(01)-240x240T0800 EFR EFR(02)-240x240 EFR 0.2 -- 60 2.8 3.6 1.0 X 10 EFR(02)-240x240T0800 EFR 0.2 0.03 60 2.8 3.6 1.0 X 107 0.22 7 0.22 EFR(03)-240x240 EFR 0.3 -- 60 2.8 3.6 1.0 X 10 EFR(03)-240x240T0800 EFR 0.3 0.03 60 2.8 3.6 1.0 X 107 0.22 EFR(05)-240x240 EFR 0.5 -- 60 2.8 3.6 1.0 X 107 0.22 EFR(05)-240x240T1500 EFR 0.5 0.14 60 2.8 3.6 1.0 X 10 7 0.22 EFR(10)-240x240 EFR 1 -- 60 2.8 3.6 1.0 X 107 0.22 EFR(10)-240x240T1500 EFR 1 0.14 60 2.8 3.6 1.0 X 107 0.22 EFX(005)-240x240T0800 EFX 0.05 0.03 100 3.2 6.8 1.0 X 10 6 0.22 EFX(01)-240x240T0800 EFX 0.1 0.03 100 3.2 6.8 1.0 X 106 0.22 6 0.22 EFX(02)-240x240 EFX 0.2 -- 100 3.2 6.8 1.0 X 10 EFX(02)-240x240T0800 EFX 0.2 0.03 100 3.2 6.8 1.0 X 106 0.22 EFX(03)-240x240 EFX 0.3 -- 100 3.2 6.8 1.0 X 106 0.22 EFX(03)-240x240T0800 EFX 0.3 0.03 100 3.2 6.8 1.0 X 10 6 0.22 EFX(05)-240x240 EFX 0.5 -- 100 3.2 6.8 1.0 X 106 0.22 EFX(05)-240x240T1500 EFX 0.5 0.14 100 3.2 6.8 1.0 X 106 0.22 EFF(007)-240x240T0800 EFF 0.07 0.03 130 3.6 6.9 1.0 X 10 6 0.4 EFF(01)-240x240T0800 EFF 0.1 0.03 130 3.6 6.9 1.0 X 106 0.4 6 0.4 EFF(02)-240x240 EFF 0.2 -- 130 3.6 6.9 1.0 X 10 EFF(02)-240x240T0800 EFF 0.2 0.03 130 3.6 6.9 1.0 X 106 0.4 EFF(03)-240x240 EFF 0.3 -- 130 3.6 6.9 1.0 X 106 0.4 0.4 EFF(03)-240x240T0800 EFF 0.3 0.03 130 3.6 6.9 1.0 X 10 EFA(003)-240x240T0800 EFA 0.03 0.03 60 3.1 6.8 1.0 X 107 1.3 EFG(005)-240x240T0800 EFG 0.05 0.03 20 3 3.5 1.0 X 106 0.22 EFG(01)-240x240T0800 EFG 0.1 0.03 20 3 3.5 1.0 X 106 0.22 EFG(02)-240x240 EFG 0.2 -- 20 3 3.5 1.0 X 106 0.22 EFG(02)-240x240T0800 EFG 0.2 0.03 20 3 3.5 1.0 X 10 6 0.22 EFG(03)-240x240 EFG 0.3 -- 20 3 3.5 1.0 X 106 0.22 EFG(03)-240x240T0800 EFG 0.3 0.03 20 3 3.5 1.0 X 106 0.22 EFH(005)-240x240T2200 EFH 0.05 0.05 60 3.1 6.8 1.0 X 10 7 1.3 EFH(01)-240x240T2200 EFH 0.1 0.05 60 3.1 6.8 1.0 X 107 1.3 mm mm at 3 MHz Typical Mpa Minimum /sq. typical W/mK Thickness Tape Thickness Permeability Specific Gravity Tensile Strength Surface Resistivity Thermal Conductivity Part Number Series (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 6 FS8004_NSS * 10/9/2018 13 Flex Suppressor (R) Noise Suppression Sheet Shielding Shielding materials (metal, electrically conductive material) Shield While transmitted waves can be minimized, most of the incoming waves are reflected, causing internal interference. High frequency electric current occurs on the metal surfaces and the reflected noise occurs at the shielding joints, metal openings, and other parts when the grounding is poor. Reflected waves Reflected waves Incoming waves Metal surface High-frequency electric current Radio wave absorber Shielding material with radio wave absorber Shielding material with radio wave absorber, transmitted waves and reflected waves can be minimized by mounting metal plates on the back of the radio wave absorbers. Reflected waves Shield Heat conversion Reflected waves Incoming waves Transmitted waves Heat conversion Radio wave absorber Radio wave absorbers To prevent reflection, the electromagnetic energy is absorbed and converted into heat. Incoming waves Heat conversion Transmitted waves Reference: other absorbing and reflecting examples Absorbing Reflecting Radio Waves Radio waves absorbers Metals Light Black objects White objects, mirrors Sound Absorbers, felt Solid bodies (concrete, etc.) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 14 Flex Suppressor (R) Noise Suppression Sheet Applications Case 1 - Suppressing noise reflected by casing Case 2 - Suppressing crosstalk between substrates Apply directly to casing (Case 1) Apply between boards (Case 2) Case 3 - Suppressing radiation noise from LSI and IC Apply directly to top of LSI or IC (Case 3) Apply directly to circuit board line (Case 3) Insulation process should be performed when there is contact to conductive material Case 4 - Suppressing noise from cables Wrap Flex Suppressor(R) around the cable. Caution : Must be covered with heat-shrink material (Case 4) Apply directly to a flat cable. (Case 4) Case 5 - Suppressing noise radiation (reflected noise) from the opening of the shield, the casing, etc. Shielded casing Attached around opening (Case 5) Opening Suppressing radiation High-frequency current on shielded surface (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 15 Flex Suppressor (R) Noise Suppression Sheet Applications (cont'd) Internal Interference Suppression Noise Radiation Suppression Devices RFID Transmission Quality Improvement Anti-ESD Measure Anti-SAR Measure On FPC and LSI for LCD module and camera module On main CPU for reception improvement On FPC and LSI for On loop antenna for LCD module and Near antenna and distance communication camera module Mobile phone On main CPU on chassis improvement On metal parts such as chassis On loop antenna for On the board and FPC Digital still camera On CCD module FPD On the board distance communication On metal parts such as -- and digital video On image processing LSI On a memory slot improvement chassis camera On loop antenna and metal On CPU and GPU On CPU and GPU On memory and SSD Near antenna and Notebook PC parts near antenna for On metal parts such as On cables inside LCD On wireless LAN and LTE and tablet distance communication on chassis panel module chassis improvement On GPS receiver and TV On LCD and FPC tuner On metal parts such as Car infotainment -- -- On control box On LSI for LCD for radio chassis reception improvement On loop antenna and metal Near field parts near antenna for -- -- communication tag -- -- distance communication (NFC tag) improvement On the interior of the Base station, optical chassis and on LSI for -- -- -- -- transceiver module error rate improvement On cable and co-axial Wireless LAN -- cable for reception -- -- -- and Wi-Fi. improvement Mobile phone Tablet Anti-ESD measure Anti-ESD measure Notebook PC Anti-SAR measure Internal interference suppression Internal interference suppression Anti-ESD measure RFID transmission quality improvement Noise radiation suppression Anti-ESD measure Noise radiation suppression Noise radiation suppression Internal interference suppression Digital still camera Car navigation system Wearable watch Anti-ESD measure Noise radiation suppression Noise radiation suppression Internal interference suppression Anti-ESD measure Anti-ESD measure Internal interference suppression Internal interference suppression (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Wireless power transfer FS8004_NSS * 10/9/2018 16 Flex Suppressor (R) Noise Suppression Sheet Examples of Shapes KEMET Flex Suppressor(R) sheets can be cut into a variety of shapes and sizes: With holes, cut-out shapes, and circular shapes Reel Precut Roll With Aluminum or PET sheet Some examples of customization, available upon request: * The use of PET film in the front, for insulation or mechanical support * The use of aluminum sheet in the front, for shielding effect * The use of different adhesive tapes on the back - stronger, thinner, thicker, etc. Customization Examples Where Function PET Film Front Insulation or mechanical support Aluminum sheet Front Shielding effect Different adhesive tape Back Stronger adhesive tape Thinner or thicker tape Reflow capable, double-sided tape (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 17 Flex Suppressor (R) Noise Suppression Sheet Permeable Characteristics EFA, FF1, EFF4, FX5 & EFX6 200 180 EFX6 ' 160 FX5 ' EFF4 ' 140 Permeability 120 FF1 ' 100 80 EFA ' 60 EFX6 " 40 FX5 " 20 EFF4 " FF1 " EFA " 0 1 10 1,000 100 10,000 Frequency [MHz] Above data are not guaranteed values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 18 Flex Suppressor (R) Noise Suppression Sheet Permeable Characteristics cont. FG1 & EFG2 50 40 EFG2 ' Permeability 30 FG1 ' 20 10 FG1 " EFG2 " 0 1 10 100 1,000 10,000 Frequency [MHz] Above data are not guaranteed values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 19 Flex Suppressor (R) Noise Suppression Sheet Permeable Characteristics cont. EFS 15 EFS ' Permeability 10 5 EFS " 0 1 10 100 1,000 10,000 Frequency [MHz] Above data are not guaranteed values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 20 Flex Suppressor (R) Noise Suppression Sheet Permeable Characteristics - Not for New Design EFF, EFG, EFR & EFX 140 120 EFF ' Permeability 100 80 EFX ' EFH ' 60 EFR ' 40 EFF ' EFX " 20 EFH " EFR " 0 1 EFG ' EFG " 10 100 1,000 10,000 Frequency [MHz] Above data are not guaranteed values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 21 Flex Suppressor (R) Noise Suppression Sheet Measuring Method of Electrical Characteristics Attenuation of transmission noise Attenuation of coupling noise Loop Antenna Loop Antenna Electrical Characteristics FX5 - Attenuation of Transmission Noise -10 FX5 FX5 (50)(25) -10 FX5 FX5 (50)(25) Transmission Transmission[dB] [dB] FX5 (25) FX5 (25) -20 -20 -30 -30 -40 -40 -60 -60 100 100 15 15 FX5 FX5 (75)(50) FX5 FX5 (75)(50) FX5 (100) FX5 (75) FX5 (100) FX5 (75) -30 -30 -40 -40 -50 -50 Copper Copper Frequency [MHz] Frequency [MHz] Frequency [MHz] Frequency [MHz] 900 900 5 5 0 0 -5 -5 EFX6 - Attenuation of Transmission Noise EFX6 EFX6 Type Type -20 -20 EFX6 (02) (02) -20 EFX6EFX6 (01) -20 EFX6 (01) EFX6 (01) EFX6 (01) -30 -30 -40 -40 -60 -60 100 100 200 200 15 15 EFX6EFX6 (03)(02) EFX6EFX6 (03)(02) EFX6 (03) EFX6 (03) -40 -40 -50 -50 Copper Copper Frequency [MHz] Frequency [MHz] Frequency [MHz] Frequency [MHz] 900 900 0 0 FX5 (50) FX5 (75) FX5 (50) FX5 (75) FX5 (100) FX5 (100) Frequency [MHz] Frequency [MHz] Frequency [MHz] Frequency [MHz] 900 900 1 1 900 900 1 1 15 10 10 5 5 EFX6 (01) EFX6 (01) 0 0 -5 -5 1,000 1,000 5 5 0 0 Copper EFX6Copper (02) EFX6 (02) EFX6 (02) EFX6(01) (02) EFX6 EFX6 (01) Copper Copper -5 -5 -10 -10 EFX6 (03) EFX6 (03) EFX6 (03) EFX6 (03) -15 -15 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 300 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 200 200 Frequency [MHz] Frequency [MHz] Frequency [MHz] Frequency [MHz] Above data are not guaranteed values. 0 0 -30 -30 -30 -30 Transmission Transmission[dB] [dB] -20 -20 EFA Type Type EFA EFA (005) EFA (01) EFA EFA (01) (005)EFA (02) EFA (01) EFA (01) EFA (02) 15 15 10 10 EFA(03) (02) EFA EFA(03) (02) EFA EFA (03) EFA (03) -40 Electronics Corporation * KEMET Tower * One East Broward Boulevard (c) KEMET -40 Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com -50 -50 Copper -50 Copper -50 -60 -60 Copper Copper EFA EFA Type Type 5 5 0 0 -5 -5 15 15 EFA Type Type EFA 10 10 Coupling Coupling[dB] [dB] EFA EFA Type Type -10 -10 EFA (005) EFA (005) -20 -20 -40 -40 FX5 (75) FX5 (100) FX5 (75) FX5 (100) FX5 (25) FX5 (25) EFX6 EFX6 Type Type EFX6 Type Type 15 EFX6 -15 -15 100 100 Coupling[dB] [dB] Coupling -10 -10 Copper Copper -15 -15 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 300 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 200 200 0 0 Copper Copper -10 -10 -10 -10 -60 -60 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 300 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 5 5 -5 FX5 (50) -5 FX5 (50) 10 10 -30 -30 Copper Copper -50 -50 EFX6 Type Type EFX6 -10 -10 Transmission Transmission[dB] [dB] -10 -10 0 0 FX5 Type Type FX5 EFX6 - Attenuation of Coupling Noise Coupling[dB] [dB] Coupling 0 0 FX5 (25) FX5 (25) -15 -15 100 100 1,000 1,000 15 15 10 10 -10 -10 -60 -60 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 300 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 200 200 FX5 FX5 Type Type 10 10 FX5 (100) FX5 (100) -20 -20 Copper Copper -50 -50 FX5 Type Type FX5 Coupling Coupling[dB] [dB] -10 -10 0 0 Coupling Coupling[dB] [dB] FX5 FX5 Type Type Coupling[dB] [dB] Coupling 0 0 FX5 - Attenuation of Coupling Noise EFA (005) EFA (005) 5 5 EFA (005) EFA (005) EFA (01) EFA (01) 0 0 -5 -5 -10 -10 -10 -10 -15 -15 Copper Copper EFA (01) EFA (01) Copper Copper FS8004_NSS * 10/9/2018 EFA (02) EFA (02) EFA (03) EFA EFA(02) (03) EFA (02) 22 EFA (03) EFA (03) -40 Copper -50 -60 -30 100 Copper (R) 0 -5 -50 Flex Suppressor -10 Noise-60 Suppression Sheet -15 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 200 900 1,000 EFX6 (01) Coupling -40 Coupling Transmissi -30 0 EFX6 (02) EFX6 (01) -5 -10 100 EFX6 (03) 200 -40 100 EFA (03) -30 -40 Copper -50 -50 EFA(03) (02) EFA Copper 15 10 10 5 5 EFA (005) 0 -5 EFA (005) EFA (01) 0 900 -15 1,000 FF1 - Type FF1 Attenuation of Transmission Noise 15 FF1 (50) FF1 (50) Copper FF1 (50) FF1 (200) -30 FF1 (100) -20 FF1 (200) FF1 (50) FF1 FF1 (100) (300) (300) FF1 FF1 (100) FF1 (300) FF1 (200) FF1 (300) -40 -30 Copper -50 -40 Copper300 200 -60 400 -50 100500 200 -60 400 100500 Copper 200 600 300700 400800 200600 300700 500900 1,000 700 600 800 900 1,000 400800 Frequency [MHz] 500900 1,000 700 600 800 900 1,000 Transmission Transmission [dB] [dB] F4 Type EFF4 (01) -10 0 -30 -20 EFF4 (02) -40 -30 EFF4 (01) Copper 200 Copper300 EFF4 EFF4(01) (03) -10 -5 -60 400 -50 100500 200 600 300700 Copper Frequency [MHz] 200 300 15 10 15 EFF4 (02) EFF4 (05) EFF4 (03) EFF4 (05) EFF4 (02) EFF4 (03) -60 400 100500 200600 300700 Frequency [MHz] 400800 500900 1,000 700 600 EFF4 (05) EFF4 (05) 800 900 1,000 Frequency [MHz] Above guaranteed 800are not500 900 values. 1,000 400data 600 700 Above data 800are not guaranteed 900 values. 1,000 Copper FF1 (50) -5 0 FF1 (100) -10 -5 200 300 -15 (100) FF1 400 -10 100500 200 300 -15 400 100500 FF1 (200) FF1 (100) FF1 (300) 200600 200600 F FF1 (200) FF1 (100) (300) FF1 (200) 800 1,000 700 300700 400800 FF1 500900 600 F Frequency [MHz] Frequency [MHz] 100 FF1 (200) 300700 400800 500900 1,000 700 600 800 Frequency [MHz] EFF4 Type 15 EFF4 Type 5 10 EFF4 (01) 0 5 EFF4 (01) -5 0 10 15 EFF4 (02) -15 200 300 EFF4 Type EFF4 (01) 0 5 EFF4 (02) -5 0 -10 -5 -15 -10 100 5 10 EFF4 Type EFF4 (01) Copper Copper Copper Copper EFF4 (02) EFF4 (02) -10 -5 EFF4 (03) -15 400 -10 100500 200600 300700 EFF4 (03) [MHz] Frequency 100 200 300 -15 400 100500 200600 EFF4 EFF4 (05) EFF4 (03) 300700 400800 500900 1,000 700 600 EFF4 (05) EFF4 (03) Frequency [MHz] Above guaranteed 800are not500 900 values. 1,000 400data 600 700 800 EFF4 Above data 800are no Frequency Frequency [MHz] Above data[MHz] are not guaranteed values. Frequency [MHz] Above data are not guaranteed values. FF1 (50) 0 5 EFF4 - Attenuation of Coupling Noise Copper -50 -40 FF1 (50) Copper Frequency [MHz] EFF4 Type EFF4 EFF4(01) (03) Copper -5 0 FF1 Type 5 10 FF1 (50) Frequency [MHz] EFF4 Type -20 EFF4 (02) -10 10 15 Copper 0 5 -15 CouplingCoupling [dB] [dB] 0 FF1 Type 5 10 EFF4 - Attenuation of Transmission Noise F4 Type 15 -15 -10 100 Frequency [MHz] Frequency [MHz] 300 FF1 (200) 10 15 CouplingCoupling [dB] [dB] Transmission Transmission [dB] [dB] FF1 Type -10 0 FF1 (100) -20 -10 900 FF1 FF1Type - AttenuationFF1 ofType Coupling Noise CouplingCoupling [dB] [dB] 1 Type EFA (03) Frequency [MHz] Frequency [MHz] CouplingCoupling [dB] [dB] 0 EFA (03) EFA (02) -15 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 200 Frequency [MHz] Frequency [MHz] 1 Type Copper EFA (02) -10 100 Copper EFA (01) -5 -10 -60 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 200 EFA Type 15 Coupling [dB] -30 EFA (01) EFA (005)EFA (02) EFA (01) Coupling [dB] -20 Transmission [dB] -10 -60 EFA Type EFA Type EFA (005) -20 1 EFA - Attenuation of Coupling Noise 0 -10 900 Frequency [MHz] Frequency [MHz] EFA - Attenuation of Transmission Noise EFA Type EFX6 (03) -15 300 100 400 200 500 300 600 400 700 500 800 600 900 7001,000 800 Frequency [MHz] Frequency [MHz] Electrical Characteristics cont. 0 EFX6 (02) Above data are not guaranteed values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Above data are not guaranteed values. FS8004_NSS * 10/9/2018 Above data are no 23 Flex Suppressor (R) Noise Suppression Sheet Electrical Characteristics - Not for New Design EFR - Attenuation of Transmission Noise EFR - Attenuation of Coupling Noise TYPE TYPE/ EFR / EFR 0 0 1515 TYPE TYPE/ EFR / EFR 0 0 -20 -20 -10 -10 -30 -30 EFR (01) EFR (01) -20 -20 -40 -40 EFR (005) EFR (005) -30 -30 -50 -50 EFR (01) EFR (01) -40 -40 -60 -60 100 100 EFR (02) EFR (02) EFR (10) EFR (10) EFR (03) EFR (03) Copper Copper 200 200 300 300 400 400 700 700 800 800 -5-5 -15 -15 100 100 900 900 1,000 1,000 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1,000 1,000 Frequency Frequency[MHz] [MHz] TYPE TYPE/ EFX / EFX EFX - Attenuation of Transmission Noise 0 0 -10 -10 -30 -30 -20 -20 -40 -40 -30 -30 -50 -50 -40 -40 -60 -60 100 100 200 200 -50 -50 -60 -60 100 100 EFX (03) EFX (03) EFX (02) EFX (02) EFX (05) EFX (05) EFX (01) EFX (01) EFX (005) EFX (005) EFX (03) EFX (03) Copper Copper EFX (02) EFX (02) EFX (01) EFX (01) EFX (005) EFX (005) 700 800 800 300 300 400 400 500 500 600 600 700 Copper Copper 300 300 400 400 500 500 600 600 700 700 800 800 Frequency Frequency[MHz] [MHz] TYPE TYPE/ EFF / EFF Transmission [dB] Transmission [dB] Transmission [dB] Transmission [dB] TYPE TYPE/ EFF / EFF EFF (03) EFF (03) EFF (02) EFF (02) -20 -20 0 0 EFF (01) EFF (01) -30 -30 -10 -10 EFF (03) EFF (03) EFF (02) EFF (02) -40 -40 -20 -20 200 200 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1,000 1,000 Frequency [MHz] Frequency [MHz] EFR (10) EFR (10) 200 200 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1,000 1,000 Copper Copper 1010 15 5 15 5 EFX (005) EFX (005) EFX (01) EFX (01) 10 0 10 0 -15 -15 100 100 EFX (02) EFX (02) EFX (03) EFX (03)Copper Copper EFX (005) EFX (005) EFX (01) EFX (01) 200 200 300 300 400 400 500 500 EFX (02) EFX (02) EFX (03) EFX (03) EFX (05) EFX (05) 600 600 700 700 800 800 900 900 1,000 1,000 Frequency Frequency[MHz] [MHz] EFX (05) EFX (05) 200 200 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1,000 1,000 Frequency Frequency[MHz] [MHz] 200 200 300 300 400 400 200 200 300 300 400 400 500 500 600 600 Copper Copper 700 700 500 500 700 700 600 600 Above data are not guaranteed values. 5 15 5 15 EFF (02) EFF (02) 0 10 0 10 800 800 900 900 1,000 1,000 -15 -15 -5-5 100 100 EFF (02) EFF (02) 900 900 1,000 1,000 Frequency Frequency[MHz] [MHz] (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com -15 -15 100 100 EFF (03) EFF (03) EFF (01) EFF (01) 200 200 300 300 400 400 500 500 600 600 700 700 800 800 EFF (03) EFF (03) 900 900 1,000 1,000 Frequency Frequency[MHz] [MHz] -10 -10 800 800 Copper Copper EFF (01) EFF (01) -10 -10 0 0 Frequency Frequency[MHz] [MHz] -50 -50 Copper Copper 1010 -5-5 5 5 EFF (01) EFF (01) Copper Copper -50 -50 -30 -30 -60 -60 100 100 EFR (05) EFR (05) 1515 -10 -10 -60 -60 -40 -40 100 100 EFR (03) EFR (03) EFR (10) EFR (10) -10 -10 900 900 1,000 1,000 EFR (01) EFR (01) EFX - Attenuation of Coupling Noise -5-5 -15 -15 100 100 0 0 EFR (005) EFR (005) 0 0 -10 -10 900 900 1,000 1,000 EFR (03) EFR (05) EFR (03) EFR (05) Copper Copper EFR (02) EFR (02) 5 5 -5-5 Frequency Frequency[MHz] [MHz] 200 200 EFR (01) EFR (01) Frequency Frequency[MHz] [MHz] Coupling [dB] Coupling [dB] Coupling [dB] Coupling [dB] Transmission [dB] Transmission [dB] Transmission [dB] Transmission [dB] EFX (05) EFX (05) 0 0 -20 -20 -15 -15 100 100 1515 TYPE TYPE/ EFX / EFX -10 -10 EFR (005) EFR (005) -10 -10 Frequency Frequency[MHz] [MHz] 200 200 10 0 10 0 EFR (02) EFR (02) 0 0 -10 -10 EFR (03) EFR (03) 500 600 500Copper 600 Copper 15 5 15 5 5 5 -5-5 EFR (05) EFR (05) EFR (005) EFR (005) -50 -50 -60 -60 100 100 EFR (05) EFR (05) EFR (02) EFR (02) Copper Copper 1010 Coupling [dB] Coupling [dB] Coupling [dB] Coupling [dB] EFR (10) EFR (10) Coupling [dB] Coupling [dB] Coupling [dB] Coupling [dB] Transmission [dB] Transmission [dB] Transmission [dB] Transmission [dB] -10 -10 200 200 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1,000 1,000 Frequency Frequency[MHz] [MHz] FS8004_NSS * 10/9/2018 24 -20-20 -30-30 Flex Suppressor (R) -40-40 EFX (03) EFX (03) EFX (02) EFX (02) EFX (01) EFX (01) EFX (005) EFX (005) Noise Suppression Sheet -50-50 Copper Copper 10 10 EFX (05) EFX (05) Coupling [dB] Coupling [dB] Transmission [dB] Transmission [dB] -10-10 Copper Copper 5 5 0 0 EFX (005) EFX (005) EFX (01) EFX (01) -5 -5 -10-10 -60-60 Electrical -600Not Design cont. 1,000 700700for 800800New 900900 1,000 100100 Characteristics 200200 300300 400400 500500 600 EFX (02) EFX (02) EFX (03) EFX (03) EFX (05) EFX (05) -15-15 1,000 100100 200200 300300 400400 500500 600600 700700 800800 900900 1,000 Frequency [MHz] Frequency [MHz] Frequency [MHz] Frequency [MHz] EFF - Attenuation of Transmission Noise EFF - Attenuation of Coupling Noise TYPE / EFF TYPE / EFF 0 0 -10 -30 -30-10 -20 -40 -40-20 -30 -50 -50-30 (02) EFFEFF (02) (01) EFFEFF (01) EFAEFA (03) (03) EFAEFA (02) (02) EFAEFA (01) (01) Copper Copper 15 5 5 15 10 0 0 10 -55-55 -10-10 Frequency [MHz] Frequency [MHz] EFAEFA (01) (01) Frequency [MHz] Frequency [MHz] -15-15 1,000 100100 200200 300300 400400 500500 600600 700700 800800 900900 1,000 Frequency [MHz] Frequency [MHz] Frequency [MHz] Frequency [MHz] EFH - Attenuation of Coupling Noise TYPE / EFH TYPE / EFH 0 0 15 15 Copper Copper 10 10 EFH (01) EFH (01) EFH (005) EFH (005) -30-30 -40-40 Copper Copper -60-60 1,000 100100 200200 300300 400400 500500 600600 700700 800800 900900 1,000 Frequency [MHz] Frequency [MHz] (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Coupling [dB] Coupling [dB] -10-10 Transmission [dB] Transmission [dB] (03) EFFEFF (03) EFAEFA (005) (005) -60-60 1,000 100100 200200 300300 400400 500500 600600 700700 800800 900900 1,000 -50-50 Copper Copper EFAEFA (03) (03) -5 -5 -15 -15 EFA (02) EFA (02) 1,000 400 500 600600 700700 800800 900900 1,000 100100 200200 300300 400 500 -40 -60 -60-40 1,000 100100 200200 300300 400400 500500 600600 700700 800800 900900 1,000 Copper Copper -50-50 -20-20 (02) EFFEFF (02) (01) EFFEFF (01) 0 0 -10-10 EFAEFA (005) (005) EFH - Attenuation of Transmission Noise Copper Copper 10 10 (03) EFFEFF (03) Coupling [dB] Coupling [dB] Coupling [dB] Coupling [dB] Transmission [dB] Transmission [dB] Transmission [dB] Transmission [dB] -10-10 0-20 0 -20 15 15 TYPE / EFA TYPE / EFA 5 5 0 0 -5 -5 -10-10 EFH (01) EFH (01) EFH (005) EFH (005) -15-15 1,000 100100 200200 300300 400400 500500 600600 700700 800800 900900 1,000 Frequency [MHz] Frequency [MHz] Above data are not guaranteed values. FS8004_NSS * 10/9/2018 25 Flex Suppressor (R) Noise Suppression Sheet Attenuation of Decoupling Noise with Metal Metal FLEX SUPPRESSOR(R) Loop Antenna EFS Attenuation (dB) 15 EFS(10) 12 EFS(05) 9 EFS(03) 6 3 0 EFS(01) 1 EFS(02) 10 Frequency [GHz] Above data are not guaranteed values. Measuring Method of Transmission Noise Attenuation Characteristics Sample 50 mm x 50 mm Printed board (FR-4) 100 mm x 100 mm x 1.6 mm Incident Incident wave Transmission S21 Incident wave Port 2 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com P (loss) / P (in) Loss Port 1 Transmission S21 0.8 Z0 = 50 Network analyzer Loss 1.0 Micro strip line Reflection S11 Reflection S11 0.6 Higher loss is preferable Maximum 1.0 0.4 0.2 0.0 2 4 Frequency [GHz] 6 FS8004_NSS * 10/9/2018 26 Flex Suppressor (R) Noise Suppression Sheet Transmission Noise Attenuation Characteristics Shown in the graphs below are values of transmission loss calculated from the transmission characteristics S11 and S21, measured on Z0 = 50 type micro strip line (MSL) with a Flex Suppressor(R) attached. FX5 Type 1.0 0.5 0.4 FX5 (100) 0.3 0.8 1 Frequency [GHz] 10 EFX6 (03) 0.6 1 0.4 FG1 (50) 0.0 0.1 10 Frequency [GHz] FF1 Type 1.0 0.7 0.6 0.5 FF1 (300) 0.4 FF1 (50) 0.6 0.4 0.2 0.1 0.1 0.1 0.0 0.1 0.0 0.1 0.0 0.1 1.0 0.3 FF1 (100) 0.2 1 10 Frequency [GHz] EFG2 (03) 0.5 0.2 10 EFG2 (02) 0.8 FF1 (200) 0.3 1 10 EFG2 Type 0.3 Frequency [GHz] 1 Frequency [GHz] 0.9 0.7 0.5 FG1 (50) 0.4 0.1 0.8 EFX6 (02) 0.5 0.2 EFA (005) EFA (01) 0.9 EFX6 (01) FG1 (50) 0.6 0.3 0.0 0.1 1.0 0.7 Ploss/Pin 0.4 0.1 EFX6 Type 0.9 0.5 0.2 FX5 (25) 0.1 1.0 0.6 0.3 0.2 0.0 0.1 0.7 EFA (03) Ploss/Pin 0.6 0.8 0.7 FX5 (50) FG1 Type 0.9 0.8 Ploss/Pin Ploss/Pin 0.7 1.0 EFA (02) 0.9 FX5 (75) 0.8 EFA Type Ploss/Pin 0.9 Ploss/Pin 1.0 EFG2 (01) 1 Frequency [GHz] 10 EFF4 Type 0.9 0.8 EFF4 (01) Ploss/Pin 0.7 0.6 EFF4(02) 0.5 0.4 EFF4 (05) EFFA (03) 0.3 0.2 0.1 0.0 0.1 1 Frequency [GHz] (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 10 Above data are not guaranteed values. FS8004_NSS * 10/9/2018 27 Flex Suppressor (R) Noise Suppression Sheet Transmission Noise Attenuation Characteristics - Not for New Design Shown in the graphs below are values of transmission loss calculated from the transmission characteristics S11 and S21 measured on Z0 = 50 type MSL (micro strip line) with a Flex Suppressor(R) attached. EFR Type 1.0 EFX Type 1.0 EFX (05) EFR (10) EFR (05) EFR (005) 0.6 Ploss/Pin Ploss/Pin EFR (01) EFR (02) 0.4 EFF (03) 0.8 EFR (03) 0.2 0.8 EFX (005) EFX (01) 0.6 Ploss/Pin 0.8 0.0 EFX (02) 0.4 EFX (03) 0.2 0 EFF Type 1.0 2 4 6 Frequency [GHz] 8 0.0 10 EFF (01) 0.6 EFF (02) 0.4 0.2 0 2 4 6 Frequency [GHz] 8 0.0 10 EFG Type 1.0 0 2 6 0.6 Ploss/Pin Ploss/Pin 10 0.8 EFG (005) EFG (01) 0.4 EFG (02) EFG (03) 0.2 0.0 8 EFH Type 1.0 0.8 4 Frequency [GHz] 0 2 4 6 Frequency [GHz] (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com EFH (005) 0.6 EFH (01) 0.4 0.2 8 10 0.0 0 2 4 6 Frequency [GHz] 8 10 Above data are not guaranteed values. FS8004_NSS * 10/9/2018 28 Flex Suppressor (R) Noise Suppression Sheet Soldering Process Peak Temperature (C) Reflow Profile 230 200 150 B Preheating A Time (seconds) Peak Temperature +260C Preheating 150 - 180C 90 seconds maximum A 200C or more, 60 seconds maximum B 230C or more, 40 seconds maximum Number of Times 2 times maximum All noise suppression sheets are reflow capable, if used with special double-sided adhesive tape. Available upon request. Please contact KEMET respresentative for more details. Handling Precautions Avoid high temperature, humidity and direct sunlight. Storage environment should be below 40C and below 70% relative humidity. The surface resistance value listed in this catalog is a reference value of the circuit parameter to indicate noise suppression. The value does not represent the product's insulation characteristics. The value may become lower if an excess pressure is applied to the product. The products in this datasheet are not insulators, they need to be handled as conductors. Care must be taken when in use, so that conductive material does not contact the surface or the edge of the Flex Suppressor(R) sheet. Insulation process should be performed when contact to conductive material is probable. Depending on the processing procedure, powdery substance may drop out from sheet surface or the edge, if the cutting of the sheet is performed. Depending on the location, care must be taken, as this powder may effect the component's performance. Any dust, oil or moisture must be cleaned from the surface of the installation area when using an adhesive tape to attach the sheet. The adhesive tape may begin to lose some of its adhesiveness after being in storage for six months. This has no impact on the EMI filtering effectiveness. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 29 Flex Suppressor (R) Noise Suppression Sheet Export Control For customers in Japan For products that are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. For customers outside Japan Flex Suppressor(R) products should not be used or sold for the use in the development, production, stockpiling or utilization of any conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons or missiles) or any other weapons. Information on environmentally influential substances The Flex Suppressor(R) does not contain any of the substances listed below: (1) Ozone depleting substance * CFC (chlorofluorocarbon) * Halon * Carbon tetrachloride * 1,1,1-Trichloroethane * HCFC (hydrochlorofluorocarbon) * HBFC (hydrobromfluorcarbon) * Methyl bromide (2) Substances regulated by RoHS Directive * Lead and lead compound * Mercury and mercury compound * Cadmium and cadmium compound (content of plastics that are below 5 ppm) * Hexavalent chromium and hexavalent chromium compound * PBB (polybrominated biphenyl) and its kind * PBDE (polybrominated diphenylether) (3) Other environmentally influential substances (examples) * PCB (polychlorinated biphenyl) * Polychlorinated naphthalene * Hexachlorobenzene * Organotin compounds (tributyl tin, triphenyl tin) * Asbestos * Azo compound * Chlorinated paraffin and its kind (paraffin chloride, chlorinated paraffin and chloroparaffin) * Radioactive substance * PVC (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 30 Flex Suppressor (R) Noise Suppression Sheet KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com FS8004_NSS * 10/9/2018 31