CFF CONNECTOR Emboss Tape 1.27mm pitch/Connector for CFast TM Card Standard Specifications This is the connector for CFastTM Card complying with CFastTM Specification. * Compliant with CFastTM Card Standard * Stable transmission characteristic * Card connector with GND spring * Ejector with slide lock 1 * Temperature range: -40C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 30 m max. After environmental tests/ 15 m max. (variation from initial value) * Insulation resistance: 1,000 M min. 500 VDC * Withstanding voltage: 500 VAC/minute * Durability: 10,000 cycles * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. CFF CONNECTOR Card connector Offset +0.25 mm (With GND spring) Offset -0.25 mm (With GND spring) 20.32 20.32 7.62 8.105 0.53 0.2 L A S1 PC17 PC1 S7 0.05 0.2 L A PC17 PC1 0.1 0.07 1 0.05 42.8 1 0.07 2 +0.2 A 1 -0.1 0.15 Circuits (-0.25) +0.2 1 -0.1 33.96 1 2.3 0.07 1 1 0.1 0.1 0.07 0.05 2.3 0.1 42.8 1 5.9 5.9 0.05 0.05 6.5 6.5 S7 4.595 0.05 33.96 K-A Offset GND spring dimensions 0.15 A Q'ty /reel Model No. -0.25 mm With CFF-CC24S-1521-GB25T 1,500 +0.25 mm With CFF-CC24S-1521-GT25T 1,500 24 1.5 0.53 S1 8.105 1.27 4.595 (+0.25) 7.62 1.27 K-A Material and Finish Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Grounding spring: Copper alloy, nickel-undercoated, Mating part; gold-plated Housing: Plastic, UL94V-0, black RoHS compliance This product displays (LF)(SN) on a label. Top cover for Type card Snap-in type 42.8 0.1 Circuits Model No. Q'ty/box Snap-in type CFF-FT1S-11FM 1,344 Material Top cover : Stainless steel, Insulated film: PET Frame: Plastic, UL94V-0, black 5.55 4.85 39.3 30.5 0.1 RoHS compliance 1 0.07 1 0.07 +0.2 1 -0.1 2.3 0.1 2 CFF CONNECTOR Bottom cover 39.6 31 Circuits Model No. Q'ty/box Snap-in type CFF-FBU-12FM 1,344 Material Top cover : Stainless steel Insulated film: PET 34.1 RoHS compliance Card connector PC board layout Offset +0.25 mm Offset -0.25 mm 20.32 8.105 8.105 27.65 0.2 Bottom cover side 3 1.27 0.05 A S7 1.05 S1 33.5 37.8 0.2 0.05 PC1 0.05 PC17 PC17 37.8 0.8 0.1 0.08 L A 0.08 L A 0.2 0.05 0.8 2.5 0.7 PC1 0.05 27.65 0.2 S7 0.05 S1 7.62 4.595 4.595 2 7.62 1.27 1.55 20.32 0.2 Top cover side A CFF CONNECTOR Host connector Normal type Standoff 0 mm (With boss) Standoff 3 mm (Without boss) 41.4 47 0.6 0 0 1.5 -0.1 1 -0.1 20.32 8.105 4.595 1.27 46.03 0.6 0.25 A 7.9 0.05 7.62 20.32 7.62 8.9 8.105 4.595 0.05 PC1 0.08 2.5 A 0.9 43.03 0.08 33.66 0.08 0.05 9.3 0.9 0.05 0.1 1.3 Standoff 0 mm (Without boss) (3) Standooff 1.2 (4) 0.05 2.5 43.03 0.05 35 0.1 0.9 0.15 0.05 0.35 0.1 0.05 2.5 1.2 A 0.1 0.08 33.66 0.9 S1 0.1 S7 1.3 PC17 11.5 0.1 41.6 5.85 29.58 0.4 0.2 A 46.03 20.32 8.105 7.62 4.595 0.4 0.05 PC1 0.9 43.03 Standoff Boss With 0 mm Without 24 3 mm Without 0.05 0.08 2.5 1.3 0.05 A 0.35 0.1 0.9 1.2 2.5 Circuits 0.05 33.66 0.08 0.1 S1 0.1 S7 0.15 PC17 11.5 0.1 5.85 0.2 A Model No. Q'ty CFF-HC24S-S352-N120T 700 (reel) CFF-HC24S-S352-N120T1 100 (reel) CFF-HC24S-S352-N130T 700 (reel) CFF-HC24SG-S352-N133A 480 (box) CFF-HC24SG-S352-N133AR1 RoHS compliance This product displays (LF)(SN) on a label. Material and Finish Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Reinforcing: Copper alloy, nickel-undercoated, tin-plated (reflow treatment) Housing: Plastic, UL94V-0, black 75 (box) 4 CFF CONNECTOR Ejector Normal type Standoff 0 mm Standoff 3 mm 51.66 (3.39) 1.77 27.86 (5.76) Button stroke 0.1 43.03 0.9 0.05 0.08 39.6 0.5 (41.4) 38.72 5.12 Button stroke (0.3) (5.85) (10) 24.56 23.8 0.9 0.05 1.65 0.1 5 2.5 3.9 0.1 (2.5) Lock button stroke (10.5) 12.35 (7.07) Button stroke 36.7 33.05 1.3 46.73 0.9 0.05 0.9 0.05 7.5 (25.69) Standoff 0 mm 3 mm Button position Right button Left button Material and Finish Q'ty/box Model No. CFF-EP2R-NS11B 630 CFF-EP2R-NS11BR1 105 CFF-EP2L-NL10B 528 CFF-EP2L-NL10BR1 96 Frame: Stainless steel Standoff 0 mm type; Solder tail; tin-plated (reflow treatment) Push button: Plastic, UL94HB,black Lock button: Plastic, UL94HB, gray RoHS compliance Standoff 0 mm type product displays (LF)(SN) on a lable. Hold cover Standoff Normal type 0 mm GND spring With Model No. 690 CFF-NE2-NS1CR1 120 Material Frame: Stainless steel 46.73 46.75 44.75 17.35 RoHS compliance 35.63 39.63 43.63 41.23 5 2-2 5.55 +0.2 -0.1 Q'ty/box CFF-NE2-NS1C CFF CONNECTOR Host connector PC board layout Standoff 3 mm (Without boss) Standoff 0 mm (With boss) 41.4 0.05 37.83 0.05 20.32 A 8.105 +0.1 0 +0.1 1.1 0 2-2.2 PC1 S7 1.8 0.05 PC17 1.6 +0.1 0 5 0.05 S1 4.595 0.08 L A PC17 1.8 0.05 PC1 S7 Ejector Hold cover Standoff 0 mm (With boss) Standoff 0 mm (Without boss) 41.4 0.05 37.83 0.05 20.32 7.62 2-2.2 +0.1 0 0.05 1.27 1.1+0.1 0 1.8 0.05 PC1 S7 S1 5 0.05 8.8 0.05 40.40.05 30.39 Max 33.4 Min PC17 1.6 +0.1 0 1.8 0.05 46.18 0.05 20.11 Max 21.9 Min 0.8 0.08 L A 4.2 0.05 20.11 Max 42.6 0.05 0.05 26.25 0.05 46.18 0.05 2-2.35 1.55 0.05 1.8 0.05 25.63 0.05 0.05 28.35 Min 50.05 1.8 8.105 4.595 S1 19 Max 8.80.05 26.15 Max PC1 S7 1.6 +0.1 0 2-4.2 0.05 28.25 0.05 1.27 37.83 0.05 20.32 4.85 0.05 1.1+0.1 0 0.8 0.05 PC17 7.69 0.05 7.62 24 Min 1.55 0.05 4.85 0.05 8.105 4.595 0.08 L A 41.4 0.05 A 2-2.2 +0.1 0 22.95 0.05 A 30.39 Max S1 46.18 0.05 46.18 0.05 33.4 Min 1.27 0.8 0.05 5 0.05 1.27 0.8 0.05 1.8 0.05 1.55 0.05 7.62 13.65 0.05 1.55 0.05 8.105 0.08 L A 7.62 20.32 4.595 8.8 0.05 4.85 0.05 A 21.9 Min 2-2.2 Ground pad +0.1 0 23.01 0.05 23.76 Min 25.07 Min Prohibited area for mounting under movable part 26.12 0.05 4.2 0.05 39.63 0.05 30.24 0.05 23.57 0.05 Pattern and via hole prohibition area Standoff 3 mm Ejector D 40.33 0.05 Standoff 3 mm 20.32 8.105 7.62 4.595 1.27 0.8 0.05 PC17 PC1 S7 S1 1.5 0.1 0.08 L D PC17 PC1 S7 S1 2 0.05 10.78 240.05 34.4 0.05 0.05 47.45 0.05 Mountable height Max 4mm 0.05 Prohibited area for mounting under movable part 11.56 9.33 42.87 0.05 0.05 2.7 5.3 0.05 6 0.05 0.05 47 43.5 0.05 35.10.05 36.25 0.05 33.66 28.08 0.05 2-R2.7 Mountable height Max 3mm Recommended PC board layout 6