63
www.vishay.com Vishay Spectrol
Revision: 05-Aug-13 1Document Number: 57027
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3/8" Square (10 mm) Single-Turn Cermet Trimmer
The Model 63 cermet trimmer is available in several pin
configurations for top or side adjustment and with a choice
of Knob styles for finger setting. Quick adjustment is
achieved with multi-finger wiper and the standard resistance
range is between 100 and 2 M with a tolerance of
± 10 %.
FEATURES
• Arrow and graduations for repeatable settings
• “O” ring seal for solvent and aqueous washing
• Rigid board mounting achieved with pins
secured in housing
• Multi-finger wiper for better contact resistance
• Solid end stop
• Tests according to CECC 41000 or IEC 60393-1
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in inches (millimeters) ± 0.02" (0.5 mm)
63M63S
63P63X
0.01
(0.25)
0.188
(4.78)
min.
0.020 x 0.012
(0.51 x 0.30)
0.190
(4.83)
0.2 ± 0.010
(5.1 ± 0.25)
0.395
(10.03)
0.100
(2.54)
0.045
(1.14)
0.100
(2.54)
0.177
(4.5)
0.100
(2.54)
0.375
(9.52)
0.375
(9.52)
0.40
(1.02)
0.100
(2.54)
0.100
(2.54)
0.100
(2.54)
0.01
(0.25)
Spectrol
T607
(all pin styles)
0.410
(10.41)
Ø 0.330
(8.38)
T640
(pin styles P and M)
Ø 0.550
(13.97)
0.320
(8.13)
T614
(all pin styles)
0.119
(3.02)
63
www.vishay.com Vishay Spectrol
Revision: 05-Aug-13 2Document Number: 57027
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS
Effective travel 270° nominal
Resistance range 100 to 2 M
Resistance tolerance ± 10 %
End resistance 2 or 1 % whichever is greater
Temperature coefficient of resistance (typical) ± 100 ppm/°C
Power rating 0.5 W at + 70 °C derated linearly to 0 W at 125 °C
maximum voltage not to exceed 250 V
Circuit diagram
Dielectric withstand voltage 1000 VAC at sea level; 250 VAC at 80 000 ft (24 000 m)
Insulation resistance (500 VDC)1000 M minimum
Contact resistance variation 1 % or 1 , whichever is greater
MECHANICAL SPECIFICATIONS
Mechanical travel 300° ± 50
Starting torque 35 mNm max.
Weight 0.03 oz. (0.85 g) max.
Resistance element Cermet
2 terminal adjustability ± 0.15 % of RT
3 terminal adjustability ± 0.05 % of applied voltage
Terminals Pure Sn (code e3)
ENVIRONMENTAL SPECIFICATIONS
Temperature range - 55 °C to + 125 °C
Climatic category 55/125/21
Sealing IP64
PERFORMANCES
TESTS CONDITIONS MAX.
(R)
CHANGE PER CECC PER IEC PER MIL
VAB/VAC 41100
Vibration 98 m/s2, 10 Hz to 500 Hz 1 % 2 % (PARA 2.3.2) Test FC (IEC 6-2-6) Method 204
Electrical endurance 1000 h 3 % - (PARA 2.5.16) - No equiv.
Soldering - - - (PARA 2.3.7) Test TB (IEC 68-2-20) Method 208
Resistance to heat - 1 % - (PARA 2.3.7) Test B (IEC 68-2-20A) Method 210
Damp heat steady state 21 days 3 % - (PARA 2.1) Test C (IEC 68-2-3) Method 103
Mechanical life 200 cycles 3 % - - Method 2 -
Terminal strength 2.2 lbs. (1 kg) min. - - - -
MARKING
• Vishay trademark
•Model
• Resistance value
• Tolerance
• Date code
• Terminal identification
ac
bcw
(2)
(3)
(1)
63
www.vishay.com Vishay Spectrol
Revision: 05-Aug-13 3Document Number: 57027
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGING
• In box of 200 pieces code B40 (BO200)
•On request :
In box of 100 pieces code B30 (BO100)
In tube of 50 pieces code T20 (TU50)
ORDERING INFORMATION (Part Number)
Model STYLE OHMIC VALUE TOLERANCE PACKAGING CODE SPECIAL
NUMBER
M63 P
M
X
S
From
100 to 2 M
201 = 200R
K = 10 % B40 = Box 200 pieces
On request:
B30 = Box 100 pieces
T20 = Tube 50 pieces
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
63 P 200U 10 % T607 BO200 e3
MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH
201 K B4 T 03M P6 067
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
