Aluminum Electrolytic Capacitors/M
¾ EE99 ¾
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
MA
Series: Type :
-40 to + 85°C
6.3 to 100 V .DC
0.1 to 22000 µ F
I 0.06 CV + 10(µ A) after 2 minutes
Body Dia. fD
Lead Dia. fd
Lead space P
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2 2.5 3.5 5 5 7.5 7.5
5 6.3 8 10 12.5 16 18
Japan
Malaysia
China
Taiwan
( 6.3mmdia)
L
L 16:L+1.0 max
fd±0.05
14 min 3 min fD+0.5 max
f10<
P±0.5
fD+0.5 max
f8>
P±0.5
L 20:L+2.0 max
Radial Lead Type
n Features Endurance:85°C 2000 h
Smaller than series SU
n Specifications
-25 to + 85°C
160 to 450 V .DC
1 to 470 µ F
Category temp.range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
I 0.01 CV or 3(µ A) after 2 minutes
I 0.03 CV or 4(µ A) after 1 minutes
( Whichever, greater)
Endurance
Characteristics
at Low Temperature
Shelf Life
n Dimensions in mm (not to scale)
Z(- 40 °C)/
Z(+20 °C)
W.V. (V)
Z(- 25 °C)/
Z(+20 °C)
6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
5 4 3 2 2 2 2 2 2 2 3 5 6 6
12 10 8 5 4 3 3 3 - - - - - -
1. Add 0.5 per 1000 µF for products of 1000 µF or more at -25 °C
2. Add 1.0 per 1000 µF for products of 1000 µF or more at -40 °C
After applying rated working voltage for 2000 hours at +85°C and then being stabilized at
+20°C, capacitor shall meet the following limits.
Capacitance change
tan d
DC leakage current
± 20% of initial measured value
150 % of initial specified value
initial specified value
After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
(Impedance ratio at 120 Hz)
sleeve
Vent
±20 % (120Hz/+20°C)
Please see the attached standard products list
Standard
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
Country of Origin
Aluminum Electrolytic Capacitors/M
¾ EE100 ¾
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
n
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(m A )
(V)
tan d
(120Hz)
(+20°C)
6.3
10
25
iBii
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
M i n. Packaging QÕ ty
Standard Products
TapingTaping
Ripple
current
(120Hz)
(+85°C)
Lead Length
Straight
Leads
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,
i=2.5mm.
The taping dimentions are explained on p.188 of our Catalog. Please use it as a reference guide.
Endurance : 85°C 2000h
220 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000
470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000
1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000
2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500
3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500
4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500
6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500
10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250
15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100
22000 18 35.5 1900 0.70 0.8 7.5 ECA0JM223 50
330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 ECA1AM331( ) 200 2000
1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500
2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500
3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500
4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500
6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250
10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100
15000 18 35.5 1850 0.52 0.8 7.5 ECA1AM153 50
10 5 11 30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( ) 200 2000
22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000
33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000
47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000
100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000
220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000
16 470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000
1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500
2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500
3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500
4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250
6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100
10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50
100 6.3 11.2 180 0.16 0.5 2.5 5.0 2.5 ECA1EM101( ) 200 2000
330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000
470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500
1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500
2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500
3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250
4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100
6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50
47 5 11 130 0.14 0.5 2.0 5.0 2.5 ECA1VM470( ) 200 2000
35 100 6.3 11.2 210 0.14 0.5 2.5 5.0 2.5 ECA1VM101( ) 200 2000
220 8 11.5 350 0.14 0.6 3.5 5.0 ECA1VM221( ) 200 1000
Aluminum Electrolytic Capacitors/M
¾ EE101 ¾
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
35
63
nStandard Products
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,
i=2.5mm.
The taping dimentions are explained on p.188 of our Catalog. Please use it as a reference guide.
Endurance : 85°C 2000h
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(m A )
(V)
iBii
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight TapingTaping
Ripple
current
(120Hz)
(+85°C)
Lead Length
Straight
Leads
330 10 12.5 440 0.14 0.6 5.0 5.0 ECA1VM331( ) 200 500
470 10 16 550 0.14 0.6 5.0 5.0 ECA1VM471( ) 200 500
1000 12.5 20 900 0.14 0.6 5.0 5.0 ECA1VM102( ) 200 500
2200 16 25 1250 0.16 0.8 7.5 7.5 ECA1VM222( ) 100 250
3300 16 31.5 1400 0.18 0.8 7.5 ECA1VM332 100
4700 18 35.5 1600 0.20 0.8 7.5 ECA1VM472 50
0.10 5 11 1.3 0.12 0.5 2.0 5.0 2.5 ECA1HM0R1( ) 200 2000
0.22 5 11 2.9 0.12 0.5 2.0 5.0 2.5 ECA1HMR22( ) 200 2000
0.33 5 11 4.4 0.12 0.5 2.0 5.0 2.5 ECA1HMR33( ) 200 2000
0.47 5 11 5 0.12 0.5 2.0 5.0 2.5 ECA1HMR47( ) 200 2000
1 5 11 10 0.12 0.5 2.0 5.0 2.5 ECA1HM010( ) 200 2000
2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 ECA1HM2R2( ) 200 2000
3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 ECA1HM3R3( ) 200 2000
4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 ECA1HM4R7( ) 200 2000
10 5 11 65 0.12 0.5 2.0 5.0 2.5 ECA1HM100( ) 200 2000
50 22 5 11 100 0.12 0.5 2.0 5.0 2.5 ECA1HM220( ) 200 2000
33 5 11 110 0.12 0.5 2.0 5.0 2.5 ECA1HM330( ) 200 2000
47 6.3 11.2 130 0.12 0.5 2.5 5.0 2.5 ECA1HM470( ) 200 2000
100 8 11.5 250 0.12 0.6 3.5 5.0 ECA1HM101( ) 200 1000
220 10 12.5 400 0.12 0.6 5.0 5.0 ECA1HM221( ) 200 500
330 10 16 500 0.12 0.6 5.0 5.0 ECA1HM331( ) 200 500
470 10 20 650 0.12 0.6 5.0 5.0 ECA1HM471( ) 200 500
1000 12.5 25 1050 0.12 0.6 5.0 5.0 ECA1HM102( ) 200 500
2200 16 31.5 1300 0.14 0.8 7.5 ECA1HM222 100
3300 18 35.5 1500 0.16 0.8 7.5 ECA1HM332 50
10 5 11 70 0.11 0.5 2.0 5.0 2.5 ECA1JM100( ) 200 2000
22 5 11 105 0.11 0.5 2.0 5.0 2.5 ECA1JM220( ) 200 2000
33 6.3 11.2 130 0.11 0.5 2.5 5.0 2.5 ECA1JM330( ) 200 2000
47 6.3 11.2 160 0.11 0.5 2.5 5.0 2.5 ECA1JM470( ) 200 2000
100 8 11.5 270 0.11 0.6 3.5 5.0 ECA1JM101( ) 200 1000
220 10 16 450 0.11 0.6 5.0 5.0 ECA1JM221( ) 200 500
330 10 20 550 0.11 0.6 5.0 5.0 ECA1JM331( ) 200 500
470 12.5 20 750 0.11 0.6 5.0 5.0 ECA1JM471( ) 200 500
1000 16 25 1100 0.11 0.8 7.5 7.5 ECA1JM102( ) 100 250
2200 18 35.5 1400 0.13 0.8 7.5 ECA1JM222 50
0.47 5 11 10 0.10 0.5 2.0 5.0 2.5 ECA2AMR47( ) 200 2000
1 5 11 20 0.10 0.5 2.0 5.0 2.5 ECA2AM010( ) 200 2000
2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 ECA2AM2R2( ) 200 2000
100 3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 ECA2AM3R3( ) 200 2000
4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 ECA2AM4R7( ) 200 2000
10 5 11 70 0.10 0.5 2.0 5.0 2.5 ECA2AM100( ) 200 2000
22 6.3 11.2 115 0.10 0.5 2.5 5.0 2.5 ECA2AM220( ) 200 2000
tan d
(120Hz)
(+20°C)
M i n. Packaging QÕ ty
Aluminum Electrolytic Capacitors/M
¾ EE102 ¾
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
160
250
350
nStandard Products
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,
i=2.5mm.
The taping dimentions are explained on p.188 of our Catalog. Please use it as a reference guide.
Endurance : 85°C 2000h
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(m A )
(V)
iBii
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging QÕ ty
TapingTaping
Ripple
current
(120Hz)
(+85°C)
Lead Length
Straight
Leads
33 8 11.5 145 0.10 0.6 3.5 5.0 ECA2AM330( ) 200 1000
47 8 11.5 180 0.10 0.6 3.5 5.0 ECA2AM470( ) 200 1000
100 10 16 350 0.10 0.6 5.0 5.0 ECA2AM101( ) 200 500
100 220 12.5 20 550 0.10 0.6 5.0 5.0 ECA2AM221( ) 200 500
330 12.5 25 700 0.10 0.6 5.0 5.0 ECA2AM331( ) 200 500
470 16 25 900 0.10 0.8 7.5 7.5 ECA2AM471( ) 100 250
1000 18 35.5 1300 0.10 0.8 7.5 ECA2AM102 50
1 6.3 11.2 36 0.16 0.5 2.5 5.0 2.5 ECA2CM010( ) 200 2000
2.2 6.3 11.2 53 0.16 0.5 2.5 5.0 2.5 ECA2CM2R2( ) 200 2000
3.3 6.3 11.2 66 0.16 0.5 2.5 5.0 2.5 ECA2CM3R3( ) 200 2000
4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 ECA2CM4R7( ) 200 2000
10 10 12.5 105 0.16 0.6 5.0 5.0 ECA2CM100( ) 200 500
22 10 16 175 0.16 0.6 5.0 5.0 ECA2CM220( ) 200 500
33 10 20 235 0.16 0.6 5.0 5.0 ECA2CM330( ) 200 500
47 12.5 20 320 0.16 0.6 5.0 5.0 ECA2CM470( ) 200 500
100 12.5 25 515 0.16 0.6 5.0 5.0 ECA2CM101( ) 200 500
220 16 31.5 830 0.16 0.8 7.5 ECA2CM221 100
330 18 31.5 1090 0.16 0.8 7.5 ECA2CM331 50
470 18 40 1440 0.16 0.8 7.5 ECA2CM471 50
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2DM2R2( ) 200 2000
3.3 6.3 11.2 62 0.18 0.5 2.5 5.0 2.5 ECA2DM3R3( ) 200 2000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2DM4R7( ) 200 1000
10 10 12.5 100 0.18 0.6 5.0 5.0 ECA2DM100( ) 200 500
200 22 10 20 180 0.18 0.6 5.0 5.0 ECA2DM220( ) 200 500
33 10 20 220 0.18 0.6 5.0 5.0 ECA2DM330( ) 200 500
47 12.5 20 300 0.18 0.6 5.0 5.0 ECA2DM470( ) 200 500
100 16 25 475 0.18 0.8 7.5 7.5 ECA2DM101( ) 100 250
220 18 31.5 835 0.18 0.8 7.5 ECA2DM221 50
330 18 40 1140 0.18 0.8 7.5 ECA2DM331 50
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2EM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2EM2R2( ) 200 2000
3.3 8 11.5 72 0.18 0.6 3.5 5.0 ECA2EM3R3( ) 200 1000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2EM4R7( ) 200 1000
10 10 16 110 0.18 0.6 5.0 5.0 ECA2EM100( ) 200 500
22 10 20 180 0.18 0.6 5.0 5.0 ECA2EM220( ) 200 500
33 12.5 20 250 0.18 0.6 5.0 5.0 ECA2EM330( ) 200 500
47 12.5 25 330 0.18 0.6 5.0 5.0 ECA2EM470( ) 200 500
100 16 31.5 530 0.18 0.8 7.5 ECA2EM101 100
220 18 40 930 0.18 0.8 7.5 ECA2EM221 50
1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2VM010( ) 200 2000
2.2 8 11.5 55 0.20 0.6 3.5 5.0 ECA2VM2R2( ) 200 1000
tan d
(120Hz)
(+20°C)
Aluminum Electrolytic Capacitors/M
¾ EE103 ¾
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
nStandard Products
When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,
i=2.5mm.
The taping dimentions are explained on p.188 of our Catalog. Please use it as a reference guide.
Endurance : 85°C 2000h
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(m A )
(V)
iBii
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging QÕ ty
TapingTaping
Ripple
current
(120Hz)
(+85°C)
Lead Length
Straight
Leads
3.3 8 11.5 60 0.20 0.6 3.5 5.0 ECA2VM3R3( ) 200 1000
4.7 10 12.5 65 0.20 0.6 5.0 5.0 ECA2VM4R7( ) 200 500
10 10 20 115 0.20 0.6 5.0 5.0 ECA2VM100( ) 200 500
350 22 12.5 20 195 0.20 0.6 5.0 5.0 ECA2VM220( ) 200 500
33 16 25 300 0.20 0.8 7.5 7.5 ECA2VM330( ) 100 250
47 16 25 325 0.20 0.8 7.5 7.5 ECA2VM470( ) 100 250
100 18 31.5 535 0.20 0.8 7.5 ECA2VM101 50
1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2GM010( ) 200 2000
2.2 8.0 11.5 50 0.20 0.6 3.5 5.0 ECA2GM2R2( ) 200 1000
3.3 10 12.5 54 0.20 0.6 5.0 5.0 ECA2GM3R3( ) 200 500
4.7 10 16 72 0.20 0.6 5.0 5.0 ECA2GM4R7( ) 200 500
400 10 10 20 115 0.20 0.6 5.0 5.0 ECA2GM100( ) 200 500
22 12.5 25 215 0.20 0.6 5.0 5.0 ECA2GM220( ) 200 500
33 16 25 275 0.20 0.8 7.5 7.5 ECA2GM330( ) 100 250
47 16 31.5 350 0.20 0.8 7.5 ECA2GM470 100
100 18 40 600 0.20 0.8 7.5 ECA2GM101 50
1 8 11.5 37 0.20 0.6 3.5 5.0 ECA2WM010( ) 200 1000
2.2 10 12.5 44 0.20 0.6 5.0 5.0 ECA2WM2R2( ) 200 500
3.3 10 16 60 0.20 0.6 5.0 5.0 ECA2WM3R3( ) 200 500
450 4.7 10 20 79 0.20 0.6 5.0 5.0 ECA2WM4R7( ) 200 500
10 12.5 20 130 0.20 0.6 5.0 5.0 ECA2WM100( ) 200 500
22 16 25 210 0.20 0.8 7.5 7.5 ECA2WM220( ) 100 250
33 16 31.5 285 0.20 0.8 7.5 ECA2WM330 100
tan d
(120Hz)
(+20°C)
